Infiniti FX35 / FX45. Manual — part 936
SRS-4
< SERVICE INFORMATION >
DTC INDEX
B1074-B1089
INFOID:0000000001524149
B1106-B1120
INFOID:0000000001524150
DTC
Items (CONSULT screen terms)
Reference
B1074
DIAGNOSIS SENSOR UNIT
SRS-24, "Trouble Diagnosis with CONSULT-III"
B1075
B1076
B1077
B1078
B1079
B1081
PRE-TEN FRONT RH
B1082
B1083
B1084
B1086
PRE-TEN FRONT LH
B1087
B1088
B1089
DTC
Items (CONSULT screen terms)
Reference
B1106
DIAGNOSIS SENSOR UNIT
SRS-24, "Trouble Diagnosis with CONSULT-III"
B1107
B1108
B1109
B1110
B1111
B1113
SATELLITE SENS RH
B1114
B1115
B1118
SATELLITE SENS LH
B1119
B1120
DTC INDEX
SRS-5
< SERVICE INFORMATION >
C
D
E
F
G
I
J
K
L
M
A
B
SRS
N
O
P
B1122-B1137
INFOID:0000000001524151
B1138-B1153
INFOID:0000000001524152
B1202-B1210
INFOID:0000000001524153
DTC
Items (CONSULT screen terms)
Reference
B1122
DIAGNOSIS SENSOR UNIT
SRS-24, "Trouble Diagnosis with CONSULT-III"
B1123
B1124
B1125
B1126
B1127
B1129
SIDE MODULE RH
B1130
B1131
B1132
B1134
SIDE MODULE LH
B1135
B1136
B1137
DTC
Items (CONSULT screen terms)
Reference
B1138
DIAGNOSIS SENSOR UNIT
SRS-24, "Trouble Diagnosis with CONSULT-III"
B1139
B1140
B1141
B1142
B1143
B1145
CURTAIN MODULE RH
B1146
B1147
B1148
B1150
CURTAIN MODULE LH
B1151
B1152
B1153
DTC
Items (CONSULT screen terms)
Reference
B1202
DIAGNOSIS SENSOR UNIT
SRS-24, "Trouble Diagnosis with CONSULT-III"
B1203
B1204
B1205
B1206
B1207
SRS-6
< SERVICE INFORMATION >
DTC INDEX
B1209
FRONTAL COLLISION
SRS-47, "For Frontal Collision"
B1210
SIDE COLLISION
DTC
Items (CONSULT screen terms)
Reference
PRECAUTIONS
SRS-7
< SERVICE INFORMATION >
C
D
E
F
G
I
J
K
L
M
A
B
SRS
N
O
P
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000001612877
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SUPPLEMENTAL RESTRAINT SYS-
TEM” and “SEAT BELTS” of this Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SUPPLEMENTAL RESTRAINT SYSTEM”.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
Precaution for SRS "AIR BAG" and "SEAT BELT PRE-TENSIONER" Service
INFOID:0000000001327741
• Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 min-
utes.
For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-
tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have
passed.
• Diagnosis sensor unit must always be installed with their arrow marks “
⇐
” pointing towards the front of the
vehicle for proper operation. Also check diagnosis sensor unit for cracks, deformities or rust before installa-
tion and replace as required.
• The spiral cable must be aligned with the neutral position since its rotations are limited. Do not turn steering
wheel and column after removal of steering gear.
• Handle air bag module carefully. Always place driver and front passenger air bag modules with the pad side
facing upward and seat mounted front side air bag module standing with the stud bolt side facing down.
• Conduct self-diagnosis to check entire SRS for proper function after replacing any components.
• After air bag inflates, the front instrument panel assembly should be replaced if damaged.
• Always replace instrument panel pad following front passenger air bag deployment.
• Disposal, recycling, and transportation of air bag modules and seat belt pre-tensioners should be performed
in compliance with applicable federal, state and local laws and regulations.
Occupant Classification System Precaution
INFOID:0000000001327742
Replace occupant classification system control unit and passenger front seat cushion as an assembly.
Refer to Refer to Service Manual .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст