Infiniti FX35 / FX45. Manual — part 830
LU-32
< SERVICE INFORMATION >
[VK45DE]
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Standard and Limit
INFOID:0000000001325837
OIL PRESSURE
Unit: kPa (kg/cm
2
, psi)
*: Engine oil temperature at 80
°
C (176
°
F)
ENGINE OIL CAPACITY (APPROXIMATE)
Unit:
(US qt, Imp qt)
OIL PUMP
Unit: mm (in)
REGULATOR VALVE
Unit: mm (in)
Engine speed
Approximate discharge oil pressure*
Idle speed
More than 98 (1.0, 14)
2,000 rpm
More than 294 (3.0, 43)
Drain and refill
With oil filter change
5.8 (6-1/8, 5-1/8)
Without oil filter change
5.2 (5-1/2, 4-5/8)
Dry engine (engine overhaul)
7.0 (7-3/8, 6-1/8)
Oil pump body to oil pump outer rotor radial clearance
0.114 - 0.200 (0.0045 - 0.0079)
Oil pump inner rotor to oil pump outer rotor tip clearance
Below 0.180 (0.0071)
Oil pump body to oil pump inner rotor axial clearance
0.030 - 0.070 (0.0012 - 0.0028)
Oil pump body to oil pump outer rotor axial clearance
0.030 - 0.090 (0.0012 - 0.0035)
Oil pump inner rotor to oil pump body clearance
0.045 - 0.091 (0.0018 - 0.0036)
Regulator valve to oil pump body clearance
0.040 - 0.097 (0.0016 - 0.0038)
MA-1
MAINTENANCE
C
D
E
F
G
H
I
J
K
M
SECTION
MA
A
B
MA
N
O
P
CONTENTS
MAINTENANCE
SERVICE INFORMATION . . . . . . .
PREPARATION . . . . . . . . . . . . ...
Special Service Tool . . . . . . . . . . . .....
Commercial Service Tool . . . . . . . . . . ..
GENERAL MAINTENANCE . . . . . . . .
Explanation of General Maintenance . . . . . ....
PERIODIC MAINTENANCE . . . . . . . .
Introduction of Periodic Maintenance . . . . . ....
Schedule 1 . . . . . . . . . . . . . . . ....
Schedule 2 . . . . . . . . . . . . . . . ....
RECOMMENDED FLUIDS AND LUBRI-
CANTS . . . . . . . . . . . . . . . . .
Fluids and Lubricants . . . . . . . . . . . ....
Engine Oil Recommendation . . . . . . . . ....
Anti-Freeze Coolant Mixture Ratio . . . . . . ..
ENGINE MAINTENANCE (VQ35DE ENGINE)
Checking Drive Belts . . . . . . . . . . . ...
Drive Belts Tension Adjustment . . . . . . . ..
Changing Engine Coolant . . . . . . . . . ...
Checking Fuel Line . . . . . . . . . . . . .
Changing Air Cleaner Filter . . . . . . . . . .
Changing Engine Oil . . . . . . . . . . . ...
Changing Oil Filter . . . . . . . . . . . . ..
Changing Spark Plugs (Platinum-Tipped Type) . ..
Checking EVAP Vapor Line . . . . . . . . .
ENGINE MAINTENANCE (VK45DE ENGINE)
Checking Drive Belts . . . . . . . . . . . ...
Tension Adjustment . . . . . . . . . . . .
Changing Engine Coolant . . . . . . . . . ...
Checking Fuel Line . . . . . . . . . . . . ..
Changing Air Cleaner Filter . . . . . . . . . .
Changing Engine Oil . . . . . . . . . . . .
Changing Oil Filter . . . . . . . . . . . . ...
Changing Spark Plugs (Platinum-Tipped Type) . ..
Checking EVAP Vapor Line . . . . . . . . . .
CHASSIS AND BODY MAINTENANCE . . ...
Checking Exhaust System . . . . . . . . . ...
Checking A/T Fluid . . . . . . . . . . . . ..
Changing A/T Fluid . . . . . . . . . . . . ..
Checking Transfer Fluid . . . . . . . . . . ..
Changing Transfer Fluid . . . . . . . . . . ..
Checking Propeller Shaft . . . . . . . . . . .
Checking Differential Gear Oil . . . . . . . . .
Changing Differential Gear Oil . . . . . . . . .
Balancing Wheels (Bonding Weight Type) . . . ..
Tire Rotation . . . . . . . . . . . . . . .
Checking Brake Fluid Level and Leaks . . . . ...
Checking Brake Line and Cables . . . . . . .
Changing Brake Fluid . . . . . . . . . . . ..
Checking Disc Brake . . . . . . . . . . . ...
Checking Steering Gear and Linkage . . . . . ..
Checking Power Steering Fluid and Line . . . .
Axle and Suspension Parts . . . . . . . . . .
Drive Shaft . . . . . . . . . . . . . . . ...
Lubricating Locks, Hinges and Hood Latch . . . .
Checking Seat Belt, Buckles, Retractors, Anchors
and Adjusters . . . . . . . . . . . . . . ...
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . . .
MA-2
< SERVICE INFORMATION >
PREPARATION
SERVICE INFORMATION
PREPARATION
Special Service Tool
INFOID:0000000001328891
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
INFOID:0000000001328892
Tool number
(Kent-Moore No.)
Tool name
Description
KV10115801
(J38956)
Oil filter wrench
Removing and installing oil filter
a: 64.3 mm (2.531 in)
S-NT375
Tool name
(Kent-Moore No.)
Description
Power tool
(
—
)
Loosening nuts and bolts
Spark plug wrench
(
—
)
Removing and installing spark plug
Belt tension gauge
(BT3373-F)
Checking drive belt tension (VQ35DE)
PBIC0190E
S-NT047
AMA126
GENERAL MAINTENANCE
MA-3
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
K
M
A
B
MA
N
O
P
GENERAL MAINTENANCE
Explanation of General Maintenance
INFOID:0000000001328893
General maintenance includes those items which should be checked during the normal day-to-day operation
of the vehicle. They are essential if the vehicle is to continue operating properly. The owners can perform
checks and inspections themselves or have their INFINITI dealers do them.
OUTSIDE THE VEHICLE
The maintenance items listed here should be performed from time to time, unless otherwise specified.
INSIDE THE VEHICLE
The maintenance items listed here should be checked on a regular basis, such as when performing periodic maintenance, cleaning the vehicle,
etc.
Item
Reference page
Tires
Check the pressure with a gauge, including the spare, at least once a month
and always prior to a long distance trips. Adjust to the specified pressure if nec-
essary. Check carefully for damage, cuts or excessive wear.
—
Wheel nuts
When checking the tires, make sure no nuts are missing, and check for any
loose nuts. Tighten if necessary.
—
Windshield
Clean the windshield on a regular basis. Check the windshield at least every six
months for cracks or other damage. Repair as necessary.
—
Tire rotation
Tires should be rotated every 12,000 km (7,500 miles).
Transmitter compo-
nents in tire pressure
monitoring system
(TPMS)
Replace grommet seal, valve core and cap of the transmitter in TPMS every tire
replacement by reaching wear limit of tire.
Wheel alignment and
balance
If the vehicle pulls to either side while driving on a straight and level road, or if
you detect uneven or abnormal tire wear, there may be a need for wheel align-
ment. If the steering wheel or seat vibrates at normal highway speeds, wheel
balancing may be needed.
Windshield wiper
blades
Check for cracks or wear if they do not wipe properly.
—
Doors and engine
hood
Check that all doors and the engine hood operate smoothly as well as the trunk
lid and back hatch. Also make sure that all latches lock securely. Lubricate if
necessary. Make sure that the secondary latch keeps the hood from opening
when the primary latch is released.
When driving in areas using road salt or other corrosive materials, check lubri-
cation frequently.
Lamps
Make sure that the headlamps, stop lamps, tail lamps, turn signal lamps, and
other lamps are all operating properly and installed securely. Also check head-
lamp aim. Clean the headlamps on a regular basis.
—
Item
Reference page
Warning lamps and
chimes
Make sure that all warning lamps and chimes are operating properly.
—
Windshield wiper and
washer
Check that the wipers and washer operate properly and that the wipers do not
streak.
—
Windshield defroster
Check that the air comes out of the defroster outlets properly and in sufficient
quantity when operating the heater or air conditioner.
—
Steering wheel
Check that it has the specified play. Be sure to check for changes in the steering
condition, such as excessive play, hard steering or strange noises.
Free play: Less than 35 mm (1.38 in)
—
Seats
Check seat position controls such as seat adjusters, seatback recliner, etc. to
make sure they operate smoothly and that all latches lock securely in every po-
sition. Check that the head restrains move up and down smoothly and that the
locks (if equipped) hold securely in all latched positions. Check that the latches
lock securely for folding-down rear seatbacks.
—
Seat belts
Check that all parts of the seat belt system (e.g. buckles, anchors, adjusters
and retractors) operate properly and smoothly, and are installed securely.
Check the belt webbing for cuts, fraying, wear or damage.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст