Infiniti FX35 / FX45. Manual — part 810
PARKING, LICENSE PLATE AND TAIL LAMPS
LT-135
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
LT
N
O
P
Minutes)
INFOID:0000000001328397
1.
CHECK IPDM E/R
1.
Turn ignition switch ON. Turn combination switch (lighting switch) to the OFF position. Turn ignition switch
OFF.
2.
Verify that parking, license plate, and tail lamps turn on and off after approximately 10 minutes.
OK or NG
OK
>> Ignition relay malfunction. Refer to
PG-18, "Function of Detecting Ignition Relay Malfunction"
NG
>> INSPECTION END
License Plate Lamp
INFOID:0000000001328398
BULB REPLACEMENT, REMOVAL AND INSTALLATION
1.
Remove screws and remove license plate lamp from back door.
2.
Disconnect license plate lamp connector.
3.
Insert a flat head or suitable tool and remove housing.
4.
Remove bulb from it's socket.
5.
Installation is the reverse order of removal.
Front Parking Lamp
INFOID:0000000001328399
BULB REPLACEMENT
REMOVAL AND INSTALLATION
LT-30, "Removal and Installation"
Tail Lamp
INFOID:0000000001328400
BULB REPLACEMENT
.
REMOVAL AND INSTALLATION
LT-137, "Removal and Installation"
Front Side Marker Lamp
INFOID:0000000001328401
BULB REPLACEMENT
REMOVAL AND INSTALLATION
SKIA5567E
License plate lamp
: 12 V - 5 W
SKIA5568E
LT-136
< SERVICE INFORMATION >
PARKING, LICENSE PLATE AND TAIL LAMPS
LT-30, "Removal and Installation"
.
Rear Side Marker Lamp
INFOID:0000000001328402
BULB REPLACEMENT
.
REMOVAL AND INSTALLATION
LT-137, "Removal and Installation"
Rear Combination Lamp Control Unit
INFOID:0000000001328403
REMOVAL AND INSTALLATION
LT-95, "Removal and Installation of Rear Combination Lamp Control Unit"
.
REAR COMBINATION LAMP
LT-137
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
LT
N
O
P
REAR COMBINATION LAMP
Bulb Replacement
INFOID:0000000001328404
REAR FENDER SIDE (REAR SIDE MARKER LAMP BULB)
1.
Remove rear combination lamp (rear fender side).
2.
Turn bulb socket counterclockwise and unlock it.
3.
Remove bulb.
BACK DOOR SIDE (BACK-UP LAMP)
Removal and Installation
INFOID:0000000001328405
REMOVAL
Rear Fender Side
1.
Remove bumper side cover A. Refer to
2.
Disconnect rear combination lamp connector.
3.
Remove rear combination lamp mounting bolts.
4.
Pull rear combination lamp toward side of the vehicle and
remove from the vehicle.
Back Door Side
LT-117, "Removal and Installation"
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
Seal packing cannot be reused.
Stop/tail lamp and rear
turn signal lamp
: LED (Replace together with
rear combination lamp as-
sembly.)
Rear side marker lamp
: 12 V - 3.8 W
SKIA5569E
SKIA5571E
Rear combination lamp (rear fender
side) mounting nut
: 3.2 N·m (0.33 kg-m, 28 in-lb)
Rear combination lamp (Back Door
side) mounting nut
: 5.5 N·m (0.56 kg-m, 49 in-lb)
LT-138
< SERVICE INFORMATION >
INTERIOR ROOM LAMP
INTERIOR ROOM LAMP
Component Parts and Harness Connector Location
INFOID:0000000001328406
System Description
INFOID:0000000001328407
When the room lamp and personal lamp switch is in DOOR position, room lamp and personal lamp ON/OFF is
controlled by timer according to signals from switches including key switch, front door switch driver side,
unlock signal from keyfob, door lock and unlock switch, key cylinder lock and unlock switch, ignition switch.
When the room lamp and personal lamp turns ON, there is a gradual brightening over 1 second. When room
lamp and personal lamp turns OFF, there is a gradual dimming over 1 second.
The room lamp and personal lamp timer is controlled by the BCM (body control module).
Room lamp and personal lamp timer control settings can be changed with CONSULT-III.
PKIC9697E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст