Infiniti FX35 / FX45. Manual — part 612
EI-12
< SERVICE INFORMATION >
CLIP AND FASTENER
SIIA0316E
CLIP AND FASTENER
EI-13
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
M
A
B
EI
N
O
P
SIIA0317E
EI-14
< SERVICE INFORMATION >
FRONT BUMPER
FRONT BUMPER
Component Parts Location
INFOID:0000000001328060
1.
Bumper stay
2.
Front bumper guard bar
3.
Bumper reinforcement
4.
Energy absorber
5.
Bumper fascia
6.
License plate bracket
7.
Bumper center molding
8.
Bumper clamp
9.
Fillet molding
: Pawl
PIIB8942E
FRONT BUMPER
EI-15
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
M
A
B
EI
N
O
P
Removal and Installation
INFOID:0000000001529395
CAUTION:
Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with
oil.
REMOVAL
1.
Remove front grille. Refer to
EI-22, "Removal and Installation"
2.
Remove front fillet molding assembly. Only the place connected
with a front bumper fascia is removed.
3.
Remove bolts and clips of front undercover.
4.
Remove screws and clips of right/left fender protectors on front
side. Refer to
EI-24, "Removal and Installation"
5.
Remove bolts of right/left fender.
6.
Insert driver rolled with cloth between bumper fascia and “S”
type clips, and remove bumper fascia.
7.
Disconnect harness connector of fog lamps.
8.
Remove bumper fascia assembly.
CAUTION:
When removing bumper fascia, 2 workers are required so as to prevent it from dropping.
9.
Remove bumper energy absorber.
10. Remove bolts and nuts of bumper reinforcement, and remove bumper reinforcement. Remove bolts and
nuts with power tool.
11. Remove ICC sensor with bracket. Refer to Refer to
PIIA4350E
PIIA4338E
PIIA4331E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст