Infiniti FX35 / FX45. Manual — part 913
SE-10
< SERVICE INFORMATION >
SQUEAK AND RATTLE TROUBLE DIAGNOSES
Diagnostic Worksheet
INFOID:0000000001328096
PIIB8741E
SQUEAK AND RATTLE TROUBLE DIAGNOSES
SE-11
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
M
A
B
SE
N
O
P
PIIB8742E
SE-12
< SERVICE INFORMATION >
AUTOMATIC DRIVE POSITIONER
AUTOMATIC DRIVE POSITIONER
System Description
INFOID:0000000001328097
• The system automatically moves the driver seat to facilitate entry/exit to/from the vehicle. The automatic
drive positioner control unit can also store the optimum driving positions (driver seat, steering wheel position
(tilt, telescopic) and door mirror position) for 2 people. If the driver is changes, one-touch operation allows
changing to the other driving position.
• The settings (ON/OFF) of the automatic sliding seat (Entry/Exiting operation) at entry/exit can be changed
as desired, using the display unit in the center of the instrument panel. The set content is transmitted by
CAN communication, from display control unit to driver seat control unit.
• Using CONSULT-III, the seat slide and steering wheel amount at entry/exit setting can be changed.
MANUAL OPERATION
The driving position [seat position, steering wheel position (tilt, telescopic) and door mirror position] can be
adjusted with the power seat switch or ADP steering switch or door mirror remote control switch.
NOTE:
• The seat can be manually operated with the ignition switch OFF.
• The door mirrors can be manually operated with the ignition switch turned ACC or ON.
AUTOMATIC OPERATION
NOTE:
• Disconnecting the battery erases the stored memory.
• After connecting the battery, insert the key into the ignition cylinder and turn the driver door switch ON (open)
→
OFF (close)
→
ON
(open), the Entry/ Exiting operation becomes possible.
• After exiting operation is carried out, return operation can be operated.
NOTE:
During automatic operation, if the ignition switch is turned ON
→
START, the automatic operation is suspended. When the ignition switch
returns to ON, it resumes.
MEMORY STORING AND KEYFOB INTERLOCK STORING
• Store the 2 driving positions and shifts to the stored driving position with the memory switch.
Function Description
Memory switch operation
The seat, steering and door mirror move to the stored driving position by pushing
memory switch (1 or 2).
Entry/Exiting function
Exiting operation
At exit, the seat moves backward and steering wheel moves forward/upward.
Entry operation
At entry, the seat and steering wheel returns from the exiting position to the previous
driving position.
keyfob interlock operation
Perform memory operation, exiting operation and entry operation by pressing keyfob
unlock button.
Auto operation temporary stop
conditions.
When ignition switch turned to START during memory switch operation and return opera-
tion, memory switch operation and entry operation is stopped.
Auto operation stop conditions.
• When the vehicle speed becomes 7 km/h (4 MPH) or higher.
• When the setting switch, memory switch 1, or 2 are pressed.
• When A/T selector lever is in any position other than P.
• When the door mirror remote control switch is operated (when ignition switch turned to
ON or ACC).
• When power seat switch turned ON.
• When ADP steering switch turned ON (telescopic operation or tilt operation).
• When door mirror operates (only memory switch operation).
• When driver seat sliding Entry/Exiting setting is OFF (only entry/exiting operation).
• When steering wheel tilt and telescopic Entry/Exiting setting is OFF (only entry/exiting op-
eration).
• When the tilt and telescopic sensor malfunction is detected.
AUTOMATIC DRIVE POSITIONER
SE-13
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
M
A
B
SE
N
O
P
• Keyfob interlock function is set simultaneously with setting driving position memory. It can set driving posi-
tion to memory position.
NOTE:
• If another keyfob interlock function setting is performed by same key, newly registered setting is valid.
• If new memory string is performed to memory switch that already set keyfob interlock function, keyfob inter-
lock function setting is reset.
• If key does not set previously, keyfob interlock function cannot set.
MEMORY SWITCH OPERATION
PIIB3487E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст