Infiniti M45 (Y34). Manual — part 123
ASSEMBLY
AT-377
D
E
F
G
H
I
J
K
L
M
A
B
AT
5.
Install manual plate (with parking rod) to manual shaft.
6.
Install retaining pin into the manual plate and manual shaft.
a.
Fit pinhole of the manual plate to pinhole of the manual shaft with a pin punch.
b.
Use a hammer to tap the retaining pin into the manual plate.
CAUTION:
●
Drive retaining pin to 2
±
0.5 mm (0.08
±
0.020 in) over the
manual plate.
●
Do not reuse retaining pin.
7.
Install retaining pin into the transmission case and manual shaft.
a.
Fit pinhole of the transmission case to pinhole of the manual shaft with a pin punch.
b.
Use a hammer to tap the retaining pin into the transmission
case.
CAUTION:
●
Drive retaining pin to 5
±
1 mm (0.20
±
0.04 in) over the
transmission case.
●
Do not reuse retaining pin.
8.
Install terminal cord assembly in transmission case.
CAUTION:
Apply petroleum jelly to O-ring.
SCIA5715E
SCIA5297E
SCIA2427E
SCIA2428E
AT-378
ASSEMBLY
9.
Install terminal cord assembly connectors in bracket.
10. Install O-rings in servo assembly.
CAUTION:
Do not reuse O-rings.
Apply petroleum jelly to O-rings.
11. Install return spring in servo assembly.
12. Install servo assembly in transmission case.
13. Using a pair of snap ring pliers, install snap ring in transmission
case.
SCIA2326E
SCIA5719E
SCIA5717E
SCIA5679E
SCIA2333E
ASSEMBLY
AT-379
D
E
F
G
H
I
J
K
L
M
A
B
AT
14. Install lip seal and D-ring in reverse brake piston.
CAUTION:
●
Do not reuse lip seal and D-ring.
●
Apply petroleum jelly to lip seal.
●
Apply ATF to D-ring.
15. Install reverse brake piston in transmission case.
16. Install needle bearing in transmission case.
CAUTION:
Apply petroleum jelly to needle bearing.
17. Install seal rings in drum support.
CAUTION:
●
Do not reuse seal rings.
●
Apply petroleum jelly to seal rings.
18. Install spring retainer and return spring in transmission case.
SCIA2795E
SCIA2325E
SCIA2796E
SCIA3333E
SCIA2324E
AT-380
ASSEMBLY
19. Set the SST on spring retainer and install snap ring (fixing spring
retainer) in transmission case while compressing return spring.
CAUTION:
Securely assemble them using a flat-bladed screwdriver so
that snap ring tension is slightly weak.
20. Install reverse brake drive plates, driven plates and dish plate in
transmission case.
CAUTION:
Take care with order of plates.
SCIA5877E
SCIA5731E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст