Infiniti M45 (Y34). Manual — part 122
REPAIR FOR COMPONENT PARTS
AT-373
D
E
F
G
H
I
J
K
L
M
A
B
AT
INSPECTION
●
Check the following, and replace high and low reverse clutch assembly if necessary.
High and Low Reverse Clutch Snap Ring
●
Check for deformation, fatigue or damage.
High and Low Reverse Clutch Drive Plates
●
Check facing for burns, cracks or damage.
High and Low Reverse Clutch Retaining Plate and Driven Plates
●
Check facing for burns, cracks or damage.
ASSEMBLY
1.
Install drive plates, driven plates and retaining plate in high and low reverse clutch drum.
CAUTION:
Take care with order of plates.
2.
Using a flat-bladed screwdriver, install snap ring in high and low
reverse clutch drum.
3.
Install bearing race to high and low reverse clutch drum.
CAUTION:
Apply petroleum jelly to bearing race.
SCIA2868E
SCIA5215E
AT-374
REPAIR FOR COMPONENT PARTS
Direct Clutch
ACS004HH
COMPONENTS
DISASSEMBLY
1.
Using a flat-bladed screwdriver, remove snap ring from direct
clutch drum.
2.
Remove drive plates, driven plates and retaining plate from
direct clutch drum.
INSPECTION
●
Check the following, and replace direct clutch assembly if necessary.
Direct Clutch Snap Ring
●
Check for deformation, fatigue or damage.
Direct Clutch Drive Plates
●
Check facing for burns, cracks or damage.
Direct Clutch Retaining Plate and Driven Plates
●
Check facing for burns, cracks or damage.
1.
Direct clutch drum
2.
Driven plate
3.
Retaining plate
4.
Snap ring
5.
Drive plate
SCIA5226E
SCIA2868E
REPAIR FOR COMPONENT PARTS
AT-375
D
E
F
G
H
I
J
K
L
M
A
B
AT
ASSEMBLY
1.
Install drive plates, driven plates and retaining plate in direct clutch drum.
CAUTION:
Take care with order of plates.
2.
Using a flat-bladed screwdriver, install snap ring in direct clutch
drum.
SCIA2868E
AT-376
ASSEMBLY
ASSEMBLY
PFP:00000
Assembly (1)
ACS004HI
1.
As shown in the right figure, use a drift [commercial service tool
φ
22 mm (0.87 in)] to drive manual shaft oil seals into the trans-
mission case until it is flush.
CAUTION:
●
Apply ATF to manual shaft oil seals.
●
Do not reuse manual shaft oil seals.
2.
Install detent spring and spacer in transmission case.
3.
Install manual shaft to transmission case.
4.
Install parking rod to manual plate.
SCIA5259E
: 7.9 N·m (0.81 kg-m, 70 in-lb)
SCIA5248E
SCIA5716E
SCIA5220E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст