Infiniti M45 (Y34). Manual — part 790

SIDE CURTAIN AIR BAG MODULE

SRS-47

C

D

E

F

G

I

J

K

L

M

A

B

SRS

INSTALLATION

Install in the reverse order of removal.

CAUTION:

●

Always work from the side of the side curtain air bag module.

●

After replacement of side curtain air bag module, perform self-diagnosis to check that no malfunc-
tion is detected. Refer to

SRS-19, "SRS Operation Check"

.

SRS-48

CRASH ZONE SENSOR

CRASH ZONE SENSOR

PFP:98531

Removal and Installation

AHS0008Z

REMOVAL

CAUTION:

Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3
minutes.

1.

Remove front grille. Refer to

EI-19, "FRONT GRILLE"

.

2.

Remove crash zone sensor connector.

3.

Remove crash zone sensor fixing nuts.

CAUTION:

●

Replace crash zone sensor if it has been dropped or sustained an impact.

●

Do not attempt to disassemble crash zone sensor.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

●

Check crash zone sensor for proper installation.

●

After the work is complete, perform self-diagnosis to make sure that no malfunction is detected.
Refer to

SRS-19, "SRS Operation Check"

.

PHIA0201E

SIDE AIR BAG (SATELLITE) SENSOR

SRS-49

C

D

E

F

G

I

J

K

L

M

A

B

SRS

SIDE AIR BAG (SATELLITE) SENSOR

PFP:98830

Removal and Installation

AHS00090

REMOVAL

CAUTION:

Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3
minutes.

1.

Remove seat belt pre-tensioner. Refer to

SB-4, "Removal and Installation of Front Seat Belt"

.

2.

Remove side air bag (Satellite) sensor fixing nuts.

3.

Remove the side air bag (Satellite) sensor connector.

CAUTION:

●

Do not use old bolts; replace with new ones.

●

Check side air bag (Satellite) sensor to ensure it is free of deformities, dents, cracks or rust. If it
shows any visible signs of damage, replace it with new one.

●

Do not attempt to disassemble side air bag (Satellite) sensor.

●

Replace side air bag (Satellite) sensor if it has been dropped or sustained an impact.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

●

Check side air bag (Satellite) sensor for proper installation.

●

After replacement of side air bag (Satellite) sensor, perform self-diagnosis to make sure that no
malfunction is detected. Refer to

SRS-19, "SRS Operation Check"

.

PHIA0696E

SRS-50

FRONT SEAT BELT PRE-TENSIONER

FRONT SEAT BELT PRE-TENSIONER

PFP:86884

Removal and Installation

AHS00091

For removal and installation procedures, refer to

SB-4, "Removal and Installation of Front Seat Belt"

.