Infiniti Q60 Coupe (2021 year). Manual in english — page 10

3-16

Pre-driving checks and adjustments

operate when:

.

the distance between the Intelligent Key

and the vehicle is over 33 ft (10 m).

.

the Intelligent Key battery is discharged.

After locking with the remote keyless entry
function, pull the door handle to make sure
the doors are securely locked.
The LOCK/UNLOCK operating range varies
depending on the environment. To securely
operate the lock and unlock buttons, ap-
proach the vehicle to about 3 ft (1 m) from
the door.

WAD0074X

Type A (if so equipped)

WAD0075X

Type B (if so equipped)

LOCK button
UNLOCK button
TRUNK button
PANIC button
Remote engine start button

HOW TO USE REMOTE KEYLESS
ENTRY SYSTEM

When you lock or unlock the doors or the
trunk lid, the hazard indicator will flash and
the horn (or the outside chime) will sound as
a confirmation. For details, see “Setting
hazard indicator and horn mode” (P.3-18).

Locking doors, trunk lid and fuel-
filler door

1. Push the ignition switch to the OFF

position and make sure you carry the
Intelligent Key with you.*1

2. Close all the doors.
3. Push the LOCK

button

on the

Intelligent Key.

4. All the doors, trunk lid and fuel-filler door

will lock.

5. The hazard indicator flashes twice and

the horn chirps once.

*1: Doors will lock with the Intelligent Key

while the ignition switch is in the ACC
or ON position.

Unlocking doors, trunk lid and fuel-
filler door

1. Push the UNLOCK

button

on the

Intelligent Key once.

2. The hazard indicator flashes once. The

driver’s door will unlock.

3. Push the UNLOCK

button

on the

Intelligent Key again within 1 minute.

4. The hazard indicator flashes once again.

All the doors, trunk lid and the fuel-filler
door will unlock.

All doors, trunk lid and the fuel-filler door
will be locked automatically unless one of
the following operations is performed within
1 minute after pushing the UNLOCK
button on the Intelligent Key while the doors
are locked. If during this 1-minute time
period, the UNLOCK

button on the

Intelligent Key is pushed, all doors will be
locked automatically after another 1 minute.

.

Opening any door

.

Pushing the ignition switch

Opening windows (if so equipped)

The UNLOCK

button

operation also

allows you to open the window that is
equipped with the automatic open/close
function. (See “Power windows” (P.2-54).)
To open the window, push the door UN-

LOCK

button on the Intelligent Key

for

about 3 seconds

after the door is

unlocked.
To stop opening, release the UNLOCK
button

.

If the window open operation is stopped in
mid-operation while pushing the UNLOCK

button

, release and push the

UNLOCK

button

again until the

window opens completely.
Window cannot be closed using the Intelli-
gent Key.

Opening moonroof (if so equipped)

The moonroof can be opened by pushing the
UNLOCK

button

on the Intelligent

Key. This function will not operate while the
moonroof timer is activated or when the
moonroof needs to be initialized.
To open the moonroof, push the UNLOCK

button

on the Intelligent Key for

about 3 seconds after the door is unlocked.
To stop opening, release the UNLOCK
button

.

Opening trunk lid

1. Push the TRUNK

button

on the

Intelligent Key for more than 1 second.

2. The trunk will unlatch.

3. Raise the trunk lid to open the trunk.

Using panic alarm

If you are near your vehicle and feel
threatened, you may activate the alarm to
call attention as follows:
1. Push the PANIC

button

on the key

for

more than 1 second.

2. The theft warning alarm and headlights

will stay on for 25 seconds.

3. The panic alarm stops when:

.

It has run for 25 seconds, or

.

Any of the buttons on the Intelligent

Key are pushed. (Note: PANIC
button

or TRUNK

button

should be pushed for more than 1
second.)

Remote engine start (if so equipped)

The remote engine start

button

is on

the Intelligent Key if the vehicle has remote
engine start function. This function allows
the engine to start from outside the vehicle.
See “Remote engine start” (P.3-19) for more
details.

Pre-driving checks and adjustments

3-17

3-18

Pre-driving checks and adjustments

Setting hazard indicator and horn
mode

This vehicle is set in hazard indicator and
horn mode when you first receive the vehicle.
In hazard indicator and horn mode, when the
LOCK

button

is pushed, the hazard

indicator flashes twice and the horn chirps
once. When the UNLOCK

button

is

pushed, the hazard indicator flashes once.
If horns are not necessary, the system can be
switched to the hazard indicator mode.
In hazard indicator mode, when the LOCK

button

is pushed, the hazard indicator

flashes twice. When the UNLOCK
button

is pushed, neither the hazard

indicator nor the horn operates.

Hazard indicator and horn mode:

DOOR LOCK

DOOR UNLOCK

TRUNK UNLOCK

Intelligent Key system

(Using door handle or trunk

request switch)

HAZARD -

twice

OUTSIDE CHIME -

twice

HAZARD -

once

OUTSIDE CHIME -

once

HAZARD - none
OUTSIDE CHIME -

4

times

Remote keyless entry system

(Using

,

or

button)

HAZARD -

twice

HORN -

once

HAZARD -

once

HORN - none

HAZARD - none
HORN - none

Hazard indicator mode:

DOOR LOCK

DOOR UNLOCK

TRUNK UNLOCK

Intelligent Key system

(Using door handle or trunk

request switch)

HAZARD -

twice

OUTSIDE CHIME -
none

HAZARD - none
OUTSIDE CHIME -
none

HAZARD - none
OUTSIDE CHIME -
none

Remote keyless entry system

(Using

,

or

button)

HAZARD -

twice

HORN - none

HAZARD - none
HORN - none

HAZARD - none
HORN - none

Switching procedure:

To switch the hazard indicator and horn
(chime) operation, push the LOCK

and

UNLOCK

buttons on the Intelligent

Key simultaneously for more than 2 seconds.

.

When the hazard indicator mode is set,

the hazard indicator flashes 3 times.

.

When the hazard indicator and horn

mode is set, the hazard indicator flashes
once and the horn chirps once.

WARNING

To avoid risk of injury or death, do not
use the remote engine start function
when the vehicle is in an enclosed area
such as a garage.

WAD0076X

The remote engine start

button is on the

Intelligent Key if the vehicle has remote
engine start function. This function allows
the engine to start from outside the vehicle.
Automatic climate control system will auto-
matically adjust the passenger compartment
to be the set appropriate temperature when
the remote engine start function is used.
Laws in some local communities may restrict
the use of remote engine starters. For
example, some laws require a person using
remote engine start to have the vehicle in
view. Check local regulations for any re-
quirements.
Other conditions may affect the remote
engine start function. See “Conditions the

Pre-driving checks and adjustments

3-19

REMOTE ENGINE START (if so equipped)

3-20

Pre-driving checks and adjustments

remote engine start will not work” (P.3-21).
Other conditions can affect the performance
of the Intelligent Key transmitter. See “In-
telligent Key system” (P.3-6) for additional
information.

REMOTE ENGINE START OPER-
ATING RANGE

The remote engine start function can only be
used when the Intelligent Key is within the
specified operating range from the vehicle.
When the Intelligent Key battery is dis-
charged or other strong radio wave sources
are present near the operating location, the
Intelligent Key operating range becomes
narrower, and the Intelligent Key may not
function properly.
The remote engine start operating range is
approximately 197 ft (60 m) from the
vehicle.

REMOTE STARTING THE ENGINE

To use the remote start function to start the
engine, perform the following:
1. Aim the Intelligent Key at the vehicle.
2. Push the LOCK

button to lock all

doors.

3. Within 5 seconds push and hold the

remote engine start

button until

the turn signal lights flash and the tail

lights illuminate. If the vehicle is not
within view, push and hold the remote
engine start

button for at least 2

seconds.

The following events will occur when the
engine starts:

.

The front parking lights will turn on and

remain on as long as the engine is
running.

.

The doors will be locked and the air

conditioner system may turn on.

.

The engine will continue to run for about

10 minutes. Repeat the steps to extend
the time for an additional 10 minutes.
See “Extending engine run time” (P.3-
20).

.

The rear window glass and outside mirror

defroster may turn on automatically
when the outside air temperature, the
interior temperature and the engine
coolant temperature are low.

Depress and hold the brake pedal, then place
the ignition switch in the ON position before
driving. For further instructions, see “Driving
the vehicle” (P.5-16).

EXTENDING ENGINE RUN TIME

The remote engine start function can be
extended one time by performing the steps
listed in “Remote starting the engine” (P.3-
20). Run time will be calculated as follows:

.

The first 10 minute run time will start

when the remote engine start function is
performed.

.

The second 10 minutes will start imme-

diately when the remote engine start
function is performed. For example, if
the engine has been running for 5
minutes, and 10 minutes are added, the
engine will run for a total of 15 minutes.

.

Extending engine run time will count

towards the two remote engine start
limit.

A maximum of two remote engine starts, or
a single start with an extension, are allowed
between ignition cycles.
The ignition switch must be cycled to the ON
position and then back to the OFF position
before the remote engine start procedure
can be used again.

CANCELING A REMOTE ENGINE
START

To cancel a remote engine start, perform one
of the following:

.

Aim the Intelligent Key at the vehicle and

push and hold the remote engine start

button until the parking lights turn

off.

.

Turn on the hazard warning flashers.

.

Cycle the ignition switch ON and then

OFF.

.

The extended engine run time has ex-

pired.

.

The first 10 minute timer has expired.

.

The engine hood has been opened.

.

The shift lever is moved out of P (Park).

.

The alarm sounds due to illegal entry into

the vehicle.

.

The ignition switch is pushed without an

Intelligent Key in the vehicle.

.

The ignition switch is pushed with an

Intelligent Key in the vehicle but the
brake pedal is not depressed.

CONDITIONS THE REMOTE EN-
GINE START WILL NOT WORK

The remote engine start will not operate if
any of the following conditions are present:

.

The ignition switch is placed in the ON

position.

.

The hood is not securely closed.

.

The hazard warning lights are on.

.

The engine is still running. The engine

must be completely stopped. Wait at
least 6 seconds if the engine goes from
running to off. This is not applicable
when extending engine run time.

.

The remote engine start

button is

not pushed and held for at least 2
seconds.

.

The remote engine start

button is

not pushed and held within 5 seconds of
pushing LOCK

button.

.

The brake pedal is depressed.

.

The doors are not closed and locked.

.

The trunk is open.

.

The Intelligent Key warning message is

displayed in the vehicle information dis-
play.

.

The alarm sounds due to illegal entry into

the vehicle.

.

Two remote engine starts, or a single

remote engine start with an extension,
have already been used.

.

The vehicle is not in P (Park).

.

The remote engine start function has

been switched to OFF in the settings
menu on the lower display. For additional
information, see the INFINITI InTouch

TM

Owner’s Manual.

The remote engine start may display a
warning or indicator in the vehicle informa-
tion display. For an explanation of the
warning or indicator, see “Indicators for
operation” (P.2-23).

Pre-driving checks and adjustments

3-21

3-22

Pre-driving checks and adjustments

JVP0452X

1. Pull the hood lock release handle

located below the instrument panel; the
hood will then spring up slightly.

2. Pull the lever

up at the front of the

hood with your fingertips and raise the
hood.

3. When closing the hood, slowly close the

hood down to latch both the right and
left locks. Push the hood down to lock
the hood securely into place.

WARNING

.

Make sure the hood is completely
closed and latched before driving.
Failure to do so could cause the hood
to fly open and result in an accident.

.

If you see steam or smoke coming
from the engine compartment, to
avoid injury do not open the hood.

WARNING

.

Do not drive with the trunk lid open.
This could allow dangerous exhaust
gases to be drawn into the vehicle.
See “Exhaust gas (carbon monoxide)”
(P.5-4) of this manual.

.

Closely supervise children when they
are around cars to prevent them from
playing and becoming locked in the
trunk where they could be seriously
injured. Keep the car locked, with the
trunk closed, when not in use, and
prevent children’s access to Intelli-
gent Keys.

HOOD

TRUNK LID

JVP0202X

TRUNK LID RELEASE SWITCH

The trunk lid release switch

is located on

the instrument panel.
To open the trunk lid, push the release
switch. To close, push the trunk lid down.

JVP0451X

TRUNK OPEN REQUEST SWITCH

The trunk lid can be opened by pushing the
trunk open request switch

when the

Intelligent Key is within the operating range
of the trunk lock/unlock function regardless
of the inside lock knob position.
The trunk lid can be opened by pushing the
trunk open request switch

even if the

Intelligent Key is not within the operating
range of the trunk lock/unlock function,
when all doors are unlocked by the power
door lock system, and the automatic unlock
function.
(See “Intelligent Key system” (P.3-6).)

TRUNK BUTTON

The trunk lid can be opened by pushing the
TRUNK

button on the Intelligent Key for

more than 1 second.
The trunk lid can be opened by pushing the
trunk open request switch

even if the

Intelligent Key is not within the operating
range of the trunk lock/unlock function,
when all doors are unlocked by the power
door lock system, and the automatic unlock
function.
(See “Remote keyless entry system” (P.3-
15).)

Pre-driving checks and adjustments

3-23

3-24

Pre-driving checks and adjustments

JVP0203X

TRUNK RELEASE POWER CAN-
CEL SWITCH

When the switch located inside the glove
box is in the OFF position

, the power to

the trunk lid will be canceled and the trunk lid
cannot be opened by the trunk lid release
switch, the trunk open request switch or the
TRUNK button on the Intelligent Key.
When you have to leave the vehicle with a
valet and want to keep your belongings safe
in the glove box and the trunk, push this
switch to OFF and lock the glove box with
the mechanical key. Then leave the vehicle
and the Intelligent Key with the valet and
keep the mechanical key with you.

(See “Keys” (P.3-2).)
To connect the power to the trunk lid, push
the switch to the ON

position.

JVP0460X

INTERIOR TRUNK LID RELEASE

WARNING

Closely supervise children when they are
around cars to prevent them from play-
ing and becoming locked in the trunk
where they could be seriously injured.
Keep the car locked, with the trunk lid
securely latched, when not in use, and
prevent children’s access to Intelligent
Keys.

The interior trunk lid release mechanism
allows opening of the trunk lid in the event

that people become locked inside the trunk.

Releasing inside the trunk

To open the trunk lid from the inside, pull the
release handle

until the lock releases and

push up on the trunk lid. The release lever is
made of a material that glows in the dark
after a brief exposure to ambient light.
The handle is located on the back of the
trunk lid as illustrated.

JVP0461X

OPENING THE FUEL-FILLER
DOOR

To open the fuel-filler door, unlock the fuel-
filler door by using one of the following
operations, then push the upper left side of
the door

.

.

Touch the one touch unlock sensor on

one of the door handles and then push
the door handle request switch while
carrying the Intelligent Key.

.

Push the UNLOCK button on the Intel-

ligent Key twice.

.

Push the power door lock switch to the

UNLOCK position.

To lock, close the fuel-filler door securely
and lock all doors by operating the door
handle request switch, the LOCK button on
the Intelligent Key or the power door lock
switch.

FUEL-FILLER CAP

WARNING

.

Gasoline is extremely flammable and
highly explosive under certain condi-
tions. You could be burned or ser-
iously injured if it is misused or
mishandled. Always stop engine and
do not smoke or allow open flames or
sparks near the vehicle when refuel-
ing.

.

Do not attempt to top off the fuel
tank after the fuel pump nozzle shuts
off automatically. Continued refuel-
ing may cause fuel overflow, resulting
in fuel spray and possibly a fire.

.

Use only an original equipment type
fuel-filler cap as a replacement. It has
a built-in safety valve needed for
proper operation of the fuel system
and emission control system. An in-
correct cap can result in a serious
malfunction and possible injury. It
could also cause the Malfunction

Pre-driving checks and adjustments

3-25

FUEL-FILLER DOOR

3-26

Pre-driving checks and adjustments

Indicator Light (MIL) to come on.

.

Never pour fuel into the throttle body
to attempt to start your vehicle.

.

Do not fill a portable fuel container in
the vehicle or trailer. Static electricity
can cause an explosion of flammable
liquid, vapor or gas in any vehicle or
trailer. To reduce the risk of serious
injury or death when filling portable
fuel containers:

— Always place the container on the

ground when filling.

— Do not use electronic devices

when filling.

— Keep the pump nozzle in contact

with the container while you are
filling it.

— Use only approved portable fuel

containers for flammable liquid.

CAUTION

.

If fuel is spilled on the vehicle body,
flush it away with water to avoid
paint damage.

.

Insert the cap straight into the fuel-
filler tube, then tighten the fuel-filler
cap until a single click is heard. Failure

to tighten the fuel-filler cap properly
may cause the

Malfunction In-

dicator Light (MIL) to illuminate. If
the

light illuminates because the

fuel-filler cap is loose or missing,
tighten or install the cap and con-
tinue to drive the vehicle. The
light should turn off after a few
driving trips. If the

light does

not turn off after a few driving trips,
have the vehicle inspected. It is
recommended you visit an INFINITI
retailer for this service.

.

The Loose Fuel Cap warning will
appear if the fuel-filler cap is not
properly tightened. It may take a few
driving trips for the warning to be
displayed. Failure to tighten the fuel-
filler cap properly after the Loose
Fuel Cap warning appears may cause
the

Malfunction Indicator Light

(MIL) to illuminate.

.

For additional information, see “Mal-
function Indicator Light (MIL)” (P.2-
17).

JVP0454X

To remove the fuel-filler cap:
1. Turn the fuel-filler cap counterclockwise

to remove.

2. Put the fuel-filler cap on the cap holder

while refueling.

To install the fuel-filler cap:
1. Insert the fuel-filler cap straight into the

fuel-filler tube.

2. Turn the fuel-filler cap clockwise until a

single click is heard.

JVP0455X

Loose Fuel Cap warning

The Loose Fuel Cap warning appears in the
vehicle information display when the fuel-
filler cap is not tightened correctly after the
vehicle has been refueled. It may take a few
driving trips for the warning to be displayed.
To turn off the warning, perform the
following:
1. Remove and install the fuel-filler cap as

soon as possible. (See “Fuel-filler cap”
(P.3-25).)

2. Tighten the fuel-filler cap until a single

click is heard.

3. Push the

or

switch

on the

steering wheel for longer than 1 second

to turn off the Loose Fuel Cap warning
after tightening the fuel-filler cap.

WARNING

.

Do not adjust the steering wheel
while driving. You could lose control
of your vehicle and cause an accident.

.

Do not adjust the steering wheel any
closer to you than is necessary for
proper steering operation and com-
fort. The driver’s air bag inflates with
great force. If you are unrestrained,
leaning forward, sitting sideways or
out of position in any way, you are at
greater risk of injury or death in a
crash. You may also receive serious or
fatal injuries from the air bag if you
are up against it when it inflates.
Always sit back against the seatback
and as far away as practical from the
steering wheel. Always use the seat
belts.

Pre-driving checks and adjustments

3-27

TILT/TELESCOPIC STEERING

3-28

Pre-driving checks and adjustments

SPA2328

MANUAL OPERATION (if so
equipped)

Tilt or telescopic operation

Pull the lock lever

down and adjust the

steering wheel up, down, forward or rear-
ward to the desired position.
Push the lock lever up securely to lock the
steering wheel in place.

JVP0205X

ELECTRIC OPERATION (if so
equipped)

Tilt or telescopic operation

Move the switch to adjust the steering
wheel up or down, forward or rearward to
the desired position.

Entry/Exit function operation:

The memory seat system will make the
steering wheel move up automatically when
the driver’s door is opened with the ignition
switch in the LOCK position. This lets the
driver get into and out of the seat more
easily.

For more information, see “Memory seat”
(P.3-33).

SPA2471

1. To block glare from the front, swing

down the sun visor

.

2. To block glare from the side, remove the

sun visor from the center mount and
swing the visor to the side

.

3. Slide the sun visor

in or out as needed

(for driver’s side only).

SPA2447

INSIDE MIRROR

Adjust the height and the angle of the inside
mirror to the desired position.

Pre-driving checks and adjustments

3-29

SUN VISORS

MIRRORS

3-30

Pre-driving checks and adjustments

SPA2143

Manual anti-glare type

The night position

will reduce glare from

the headlights of vehicles behind you at
night.
Use the day position

when driving in

daylight hours.

WARNING

Use the night position only when neces-
sary, because it reduces rear view clarity.

SPA2422A

Type A (if so equipped)

SPA2450

Type B (if so equipped)

Automatic anti-glare type

The inside mirror is designed so that it
automatically changes reflection according
to the intensity of the headlights of the
following vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is placed
in the ON position.
The anti-glare system also operates for the
outside mirrors (if so equipped).
When the anti-glare system is turned on, the
indicator light

will illuminate and excessive

glare from the headlights of the vehicle
behind you will be reduced.
Type A (if so equipped): Push the

switch

to make the inside mirror operate normally

and the indicator light will turn off. Push the

switch

again to turn the system on.

Type B (if so equipped): Push the “

*

” switch

to make the inside mirror operate nor-

mally. The indicator light will turn off. Push
the “I” switch

to turn the system on.

Do not allow any object to cover the sensors

or apply glass cleaner on them. Doing so

will reduce the sensitivity of the sensor,
resulting in improper operation.

For the compass (if so equipped) operation,
see “Compass” (P.2-9).
For the HomeLink

®

Universal Transceiver (if

so equipped) operation, see “HomeLink

®

Universal Transceiver” (P.2-61).

OUTSIDE MIRRORS

WARNING

Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.

JVP0246X

Adjusting outside mirrors

The outside mirror control switch is located
on the driver’s armrest.
The outside mirror will operate only when
the ignition switch is in the ACC or ON
position.
Move the switch

right or left to select the

right or left side mirror, then adjust using the
control switch

.

Defrosting outside mirrors

The outside mirrors will be heated when the
rear window defroster switch is operated.
If the engine is started using the remote start
function (if so equipped) when the outside

air temperature, the interior temperature
and the engine coolant temperature are
low, the rear window glass and outside
mirror defroster may turn on automatically.
For additional information about the remote
engine start function, see “Remote engine
start” (P.3-19).

Pre-driving checks and adjustments

3-31