Infiniti QX30 (2018 year). Manual — part 19
GIVING VOICE COMMANDS
1. Push <
> located on the steering wheel.
2. A list of commands appears on the screen,
and the system provides a voice menu
prompt.
When this screen is displayed, almost all of
the commands can be recognized. Available
commands for each categories can be
shown on the right side of the screen. High-
light a category listed in the left side of the
screen with the INFINITI controller to find
your preferred command.
Selecting a category by touching the
screen or pushing <
/OK> will execute
the command. After executing the cat-
egory command, only the commands re-
lated to the selected category can be rec-
ognized.
"Command list" in the "5. Starting and
driving" section
3. After the tone sounds and the icon on the
screen changes from
to
, speak a
command. You can also select a command
by directly touching the screen.
The Voice Recognition system will pause
operation when the INFINITI controller is
moved. To resume operation, push <
>
on the steering wheel.
4. Continue to follow the voice menu
prompts and speak after the tone sounds
until the preferred operation is completed.
To cancel the voice command, push and hold
<
>.
You can interrupt the voice prompt at any
time by pushing <
>.
Operating tips
•
Speak a command after the tone.
•
If the command is not accepted, the sys-
tem announces, “Please say again”. Repeat
the command in a clear voice.
•
Push <
> on the steering-wheel
switch once to return to the previous
screen.
•
Voice commands spoken from the passen-
ger seat cannot be recognized.
•
When the <
> on the steering wheel is
pressed while the air conditioner is set to
the Auto mode, the system controls the air
conditioner fan speed in order to improve
voice recognition performance. When the
fan speed is set higher than the 4th speed
position, the fan speed is decreased to 4th
speed. When the air conditioner is set to
the manual mode, the fan speed does not
change. The accuracy of voice recognition
may be affected depending on the fan
speed and the air direction.
•
To skip the voice guidance function and
give the command immediately, push <
> on the steering-wheel to interrupt
the system. Remember to speak after the
tone.
•
To cancel the command, push and hold <
> or <
> on the steering-wheel.
•
Push <
> on the steering-wheel to stop
the voice prompt and give the command at
once. Remember to wait for the tone be-
fore speaking.
•
To adjust the volume of the system feed-
back, push the volume switch on the steer-
ing wheel or use the audio system <VOL/
> while the system is making an an-
nouncement.
NAA1732
4-106
Display screen, heater and air conditioner, and audio system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
•
For searching with Street Address, Point
of Interest and City Center, the searching
area is automatically set to the state
where your vehicle is located. Use Change
State/Province to change the search area
to another state if necessary.
How to see voice command screen
1. Push <
> to display the first screen of
the voice command list.
2. Speak a command or select an item from
the voice command list. The second
screen is displayed.
3. Speak a command. The list screen is dis-
played.
4. Speak the preferred number from the list
to perform operation.
The voice commands can be spoken one at a
time following prompts step by step or the
command can be spoken successively in one
step.
䊊
1
Shows available command list. It is also
available to select a command from this
list by touching or using the INFINITI
controller.
䊊
2
Shows available command list. Displayed
commands are only available to execute
through voice recognition. You can say
commands from the left screen and the
right screen continuously.
䊊
3
Previously selected command.
䊊
4
Command list:
You can say a command from the list,
touch the screen directly or select, using
steering switch or the INFINITI control-
ler. You can say preferred word for < >
enclosed part of the command.
䊊
5
[Previous]/[Next]:
Say as a command or touch to go to the
previous/next screen. It cannot be se-
lected using the steering switch or
INFINITI controller.
5GD0015XZ
First screen
5GD0016XZ
Second screen
Display screen, heater and air conditioner, and audio system
4-107
-------------------------------------------------------------------------------------------------------------------------------------------------------------
䊊
6
Command numbers:
Speak 1 to 6 numbers to select. Also, you
can touch the screen directly, using the
steering switch or INFINITI controller.
How to speak numbers
Voice Recognition requires the user speak
numbers in a certain way when giving voice
commands.
General rule:
Only single digits 0 (zero) to 9 can be used.
(For example, if speaking 500, “five zero
zero” can be used, but “five hundred” cannot.)
Examples:
1-800-662-6200
“One eight zero zero six six two six two zero
zero”
For the best recognition, speak “zero” for the
number “0” and “oh” for the letter “o”.
Voice command examples
As examples, some additional basic opera-
tions that can be performed by voice com-
mands are described here.
Example 1- Placing call from hands-free
phonebook:
1. Push <
> located on the steering wheel.
2. Wait for the indicator to change to
and speak “Phone”.
You can also speak “Phone” and then “Call
<Name>” successively.
3. Speak “Call <Name>”.
When options (Home, Work, etc.) are reg-
istered to a name in the contact list of a
cellular phone, the option can be com-
manded directly.
5GE0015XZ
List screen
5GE0022XZ
4-108
Display screen, heater and air conditioner, and audio system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Example, “Call Steve Brown Work” or “Call
Steve Brown Other”
4. The system prompts you to speak or se-
lect an item number from the displayed
list. To select a displayed matching item
speak a number from between 1 and 6.
If the selected number has more than one
phone number registered to it, the phone
number list screen is displayed.
Example 2 - Playing radio:
1. Push <
> located on the steering wheel.
2. Wait for the indicator to change to
and speak “Audio”.
3. Speak “Play FM” to turn on the FM radio.
Command list
To use the Voice Recognition function, you can speak commands in the order of 1st command, 2nd command and 3rd command. You can also
operate the system with directly speaking the 2nd or 3rd command.
Variable numbers or words such as names can be applied in < > when speaking a command.
See the separate Navigation System Owner’s Manual (if equipped) for the navigation command.
General command
Command
Action
Show More Com-
mands
Display other commands of the same category.
Go Back
Correct the last recognition result to return to the previous screen.
Exit
Cancel Voice Recognition.
Next
Skip to next page.
Previous
Skip to previous page.
Display screen, heater and air conditioner, and audio system
4-109
-------------------------------------------------------------------------------------------------------------------------------------------------------------
General phone command
The following commands can be used during the phone Voice Recognition session.
Command
Action
Dial
The system makes a call to spoken phone number.
Change Number Correct the phone number when it is not recognized (available during phone number entry).
4-110
Display screen, heater and air conditioner, and audio system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Phone command
1st command 2nd command
3rd command
4th command
Action
Phone
Call <Name>
<1 - 6>
Make a call to a contact that is stored on the cellular phone.
Select from the list of displayed on the right side screen.
Call
<phonebook name>
Make a call to a contact that is stored on the cellular phone.
<phonebook name> <type>
Make a call to a contact that is stored on the cellular phone. You can select type
from <Work>, <Cellular>, <Home> or <Other>.
Dial <#>
Dial
Make a call to a spoken phone number.
Change Number
Change the number to call.
Dial
<area code>
Make a call to a spoken phone number.
Speak “3 columns or 4 columns (1–****)”
<phone number static>
Make a call to a spoken phone number.
Speak “7 columns or 10 columns or 11 columns or 3 columns” (“911” or “411” or
“611”).
Recent Calls
<1 - 6>
Make a call to the recent incoming, outgoing or missed call number.
Read Text
<1 - 6>
Play
Listen to recent text messages received.
Reply
Reply to received message.
Call
Call the sender of the message.
Send Text
<phonebook name>
Select a text message from the list and send it a contact name. You can select type
from <Work>, <Cellular>, <Home> or <Other>.
<phonebook name> <type>
Phonebook
<phonebook name>
Make a call to a contact that is stored on the cellular phone. You can select type
from “Work”, “Mobile”, “Home” or “Other”.
Select “Reply” to reply by message. Select “Call” to call the sender.
<phonebook name> <type>
Display screen, heater and air conditioner, and audio system
4-111
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Phone command
1st command 2nd command
3rd command
4th command
Action
Phone
Favorites
<favorite name>
<1 - 6>
Access frequently called contacts by storing into them in the favorite list.
<favorite name>
<Type>
Redial
Make a call to the last outgoing phone number.
International Call
<phone number>
Makes an international call by allowing more than 11 digits to be spoken.
You may need to include the international call prefixes and country codes.
Add Phone
Use this command to connect a compatible Bluetooth® device to the system.
Follow the on screen instructions to complete the pairing process from your
handset.
Call <Name> Work
<1 - 6>
To call someone's work place, say the person's name stored in the phonebook on
your cellular phone between “Call” and “Work”.
Call <Name> Cellu-
lar
<1 - 6>
To call someone's cellular phone, say the person's name stored in the phonebook
on your cellular phone between “Call” and “Mobile”.
Call <Name> Home <1 - 6>
To call someone's home, say the person's name stored in the phonebook on your
cellular phone between “Call” and “Home”.
Call <Name> Other
<1 - 6>
To call someone at a place categorized as “Other”, say the person's name stored
in the phonebook on your cellular phone between “Call” and “Other”.
NOTE
The system can read out SMS text messages
in voice. However, it cannot always read the
text correctly.
4-112
Display screen, heater and air conditioner, and audio system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Audio command
1st command 2nd command
3rd command
Action
Audio
AM
Switches to the AM band, selecting the station last played.
FM
Switches to the FM band, selecting the station last played.
FM ,87.9–107.9.
Switches to the FM band, selecting the station of the preferred frequency.
SXM ,channel #>
Switches to the SiriusXM Satellite Radio band, selecting the preferred channel.
SXM
Switches to the SiriusXM Satellite Radio band, selecting the channel last played.
USB
Play
Artist
<Name>
<1 - 6>
Turns on the USB mode, selecting the artist.
iPod
Play
Artist
<Name>
<1 - 6>
Turns on the iPod mode, selecting the artist.
USB Play Artist
<artist>
Turns on the USB mode, selecting the artist.
iPod Play Artist
<artist>
Turns on the iPod mode, selecting the artist.
USB
Turns on the USB mode, selecting the last played mode.
iPod
Turns on the iPod mode, selecting the last played mode.
USB
Play
Album
<Name>
<1 - 6>
Turns on the USB mode selecting the album.
iPod
Play
Album
<Name>
<1 - 6>
Turns on the iPod mode selecting the album.
USB Play Album
<album name>
Turns on the USB mode, selecting the album.
iPod Play Album
<album name>
Turns on the iPod mode, selecting the album.
AM <530–1710>
Switches to the AM band, selecting the preferred station
FM <87.7–107.9> HD <#>
Switches to the FM HD band, selecting the preferred station
CD Track <#>
Turns on the CD, selecting the track number.
Display screen, heater and air conditioner, and audio system
4-113
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1st command 2nd command
3rd command
Action
Audio
USB
Play
Song
<Name>
iPod
Play
Song
<Name>
Switches to the USB or iPod, selecting the track. You can speak the commands successively.
USB Play Song
iPod Play Song
Switches to the USB or iPod, selecting the track. You can speak the commands successively.
Play <Source Name>
Plays the spoken audio source.
Play
AM
Switches to the AM band, selecting the station last played.
FM
Switches to the FM band, selecting the station last played.
SXM
SiriusXM Satellite Radio band, selecting the channel last played
USB
Turns on the USB, selecting the last played mode.
iPod
Turns on the iPod, selecting the last played mode.
CD
Turns on the CD, selecting the last played mode.
Bluetooth Audio
Turns on the Bluetooth Audio, selecting the last played mode.
iPod Playlist <name>
<1 — 6>
Turns on the iPod, playing the spoken playlist.
iPod Play Playlist
<playlist>
Turns on the iPod, playing the spoken playlist.
USB All Artists
Displays the USB all artists list.
USB All Albums
Displays the USB all albums list.
USB All Folders
Displays the USB all folders list.
iPod All Artists
Displays the iPod all artists list.
iPod All Albums
Displays the iPod all albums list.
iPod All Songs
Displays the iPod all songs list.
4-114
Display screen, heater and air conditioner, and audio system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Notes on operating audio by voice recogni-
tion:
•
An audio device connected via Bluetooth®
cannot be operated with the Voice Recog-
nition system. Source change is only avail-
able for Bluetooth® streaming Audio.
•
Song title and Artist name information will
be overwritten when another iPod®/
iPhone® is connected after song titles and
artist names in the previously connected
iPod®/iPhon®e have been installed.
•
If two USB devices are connected at the
same time, voice operation will only be
available for use with one registered and
selected device. When selecting “YES” in
the pop-up screen that displays after a
new USB audio device is connected, the
USB audio device is registered in the voice
recognition system and is selected auto-
matically. One iPod and one USB device
can be registered in the system. If a USB
audio device is newly registered, old data
is overwritten. It may take a few moments
to register an audio device. If you want to
enable voice operation for music stored on
a previously registered audio device, select
the device you want to use in advance.
"Voice recognition settings" in the "5.
Starting and driving" section
Even when a device has been previously
registered, simply connecting the device
will not result in it being selected auto-
matically.
•
The Voice Recognition system may not
function when the song information is too
long (artist names, album titles, song titles
and playlists, etc.).
•
The SXM function will not operate without
a subscription to SiriusXM Satellite Radio.
Display screen, heater and air conditioner, and audio system
4-115
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Information command
1st command
2nd command
Action
Information
Voice Menu
Connects to the INFINITI InTouch
TM
Services Response Specialists. Refer to the Navigation Owner's Manual
for details.
Operator
Connects to the INFINITI InTouch
TM
Services Response Specialists. Refer to the Navigation Owner's Manual
for details.
Where am I?*
Displays the information of the current position.
Fuel Prices
Displays the fuel prices.
Weather Forecast
Displays the weather forecast.
Current Weather
Displays the nearby weather (current weather).
Sports Scores
Displays the sports scores.
Traffic Information*
Turns the traffic information system on or off.
Route Information*
Displays the route information.
*: Models with navigation system only.
NOTE
The Fuel Prices, Weather Forecast, Current
Weather, Sports Scores and Traffic Infor-
mation will not operate without a subscrip-
tion to SiriusXM Radio.
VOICE RECOGNITION SETTINGS
Voice recognition functions can be set.
1. Push <MENU> and touch [Settings].
2. Touch [Voice Recognition].
3. Touch the item you want to set.
Available settings
•
[Minimize Voice Feedback]:
Set the Minimize Voice Feedback function
[ON] (short feedback) or [OFF] (long
feedback).
•
[Audio Device Setting]
Select an audio device to be operated via
voice recognition system from the list of
devices registered to the in-vehicle audio
system. The device with an indicator light
illuminated can be operated with voice
recognition system.
4-116
Display screen, heater and air conditioner, and audio system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
The information screen sets or displays various information that is helpful for using the vehicle. Available items include vehicle information, traffic
information, current location information and navigation software version (if equipped).
1. Push <MENU>.
2. Touch [Information].
Menu item
Result
[Eco Drive Report]
Display the Eco Drive Report for “Start”/”Cruise”/”Deceleration”.
[History]
The Eco Drive Report History screen can be scrolled.
Touching [ < ]/[ > ] while the Eco Drive Report History screen is displayed will display a previous or newest
history.
[Reset]
Reset the Eco Drive Report screen.
The average for the Reset-to-Reset period is stored as an Eco Drive Report history.
[Traffic Information.]*
Allows traffic information setup. Refer to the Navigation Owner's Manual for details.
[Map Information]*
Display the navigation system unit identification number, the current map version, and the software
version. Refer to the Navigation Owner's Manual for details.
[InTouch Services]*
Display the INFINITI InTouchTM Services information. Refer to the Navigation System Owner's Manual for
details.
[SXM Info]
Display the SiriusXM Travel Link information.
*: Models with navigation system only.
NOTE
•
A SiriusXM Traffic subscription is necessary to view Traffic Info.
•
The actual fuel economy information may differ from the information displayed on the vehicle information display. This is due to the timing
difference in updating the information and does not indicate a malfunction.
INFORMATION MENU
Display screen, heater and air conditioner, and audio system
4-117
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIRIUSXM TRAVEL LINK®
SiriusXM Travel Link Information is a sub-
scription service offered by SiriusXM Satellite
Radio. It is necessary to subscribe to use the
SiriusXM Travel Link information.
This service provides real-time information
regarding current weather, fuel prices, sports
scores, stock tickers and movie times where
available. The SiriusXM Travel Link is broad-
cast to the vehicle by SiriusXM Satellite Ra-
dio.
The service enables you to view detailed in-
formation and forecasts of an area of inter-
est.
WARNING
SiriusXM Travel Link information is not a
substitute for attentive driving. Weather
conditions change constantly and emer-
gency situations can arise without warn-
ing. Relying only on SiriusXM Travel Link
information could result in serious personal
injury.
Viewing SiriusXM Travel Link®
SiriusXM Travel Link information is available
in limited markets. To subscribe to or check if
this service is available in the area, call
1–866–635–2349
or
access
www.siriusxm.com/travellink.
NOTE
•
If a contract is not completed for the
SiriusXM Travel Link information service, a
message appears.
•
The weather information is available only
for areas that provide weather informa-
tion to SiriusXM Travel Link.
To access the SiriusXM Information menu:
1. Push <MENU>.
2. Touch [SXM Info]
5GB0496X
Example
4-118
Display screen, heater and air conditioner, and audio system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Automotive Weather information
Menu item
Action
[Automotive Weather]
[Current Weather]
Display default setting city current weather condition information. Touch [Selected City] to change the city.
[5–DAY Forecast]
Display the five-day weather forecast information for the default setting city. Touch [Selected City] to
change the city.
[Graphical Map]*
Display a graphical map of the weather information on the display. Refer to the Navigation Owner's
Manual for details.
[Alert Map]*
Show Alert Map information on the display. Refer to the Navigation Owner's Manual for details.
[Alert List]*
Display the list of weather alerts. Refer to the Navigation Owner's Manual for details.
*: Models with navigation system only.
Fuel Prices information
Menu item
Action
[Fuel Prices]
Display fuel prices. Select Gas station from the fuel prices list to display detail information or call a selected
gas station from the list.
Touch [Select Fuel Type] to select fuel type information, touch [Prices] to display the fuel price list.
Display screen, heater and air conditioner, and audio system
4-119
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Sports Score information
Menu item
Action
[Sports Scores]
Select from list
Display current event state
(scheduled game, during the
game, match results)
Select from list
XM channels to display information
Select to listen to the radio.
[Select League]
[Add League]
Add favorite sports genre for
the list. When the number of
registration is 10, it will be
grayed out.
[Delete League]
[Multi Select]
Delete multiple selected sports
scores.
[Delete All]
Delete all sports scores.
Select from list
Delete a selected sports score.
Select from list
Display the detail of a score.
Stock Tickers information
Menu item
Action
[StockTicker]
Display stock names, stock prices, fluc-
tuation contents, variable stock prices,
and the receiving date/time.
[Add Stock]
Add displaying stock
[Delete Stock]
[Delete All]
Delete all stocks.
[Multi Select]
Delete multiple selected stock.
Select from list
Delete a selected stock.
4-120
Display screen, heater and air conditioner, and audio system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Movie Times information
Menu item
Action
[Movie Listings]
[Select City]
Select from list
Select the city.
[Theater]
[Movies]
Select from list
Display detailed movie infor-
mation.
[Theater Info]
Display theater information.
[GO]*
Set
a
destination
selected
from the list of theaters.
[Near Destination]*
Display the theater near the
vehicle's destination.
[Near Current Loc.]*
Display the theater near the
vehicle's current location.
[Selected City]
Change the city.
[Movie]
Select from list
Display information for the
movie theater selected from
the list.
[Details]
Display movie title, rating and
run time.
*: Models with navigation system only.
SXM Info Settings information
Menu item
Action
[SXM Info Settings]
[Weather Alert]
Set weather alert on/off.
Display screen, heater and air conditioner, and audio system
4-121
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст