Infiniti Q45. Manual — part 239
BODY REPAIR
BL-225
C
D
E
F
G
H
J
K
L
M
A
B
BL
2006 Q45
BODY COMPONENT PARTS
SIIA2425E
BL-226
BODY REPAIR
2006 Q45
1.
Hood
2.
Front fender (RH&LH)
3.
Front fender bracket (RH&LH)
4.
Side body assembly (RH&LH)
5.
Outer sill (RH&LH)
6.
Upper front pillar hinge brace assembly (RH&LH)
7.
Outer sill reinforcement (RH&LH)
8.
Center sill reinforcement (RH&LH)
9.
Upper inner front pillar assembly (RH&LH)
10.
Inner center pillar (RH&LH)
11.
Inner rear pillar (RH&LH)
12.
Outer rear wheelhouse (RH&LH)
13.
Outer rear wheelhouse brace (RH&LH)
14.
Outer rear wheelhouse reinforcement (RH&LH)
15.
Inner rear wheelhouse assembly (RH&LH)
16.
Seat back support (RH&LH)
17.
Side parcel shelf (RH&LH)
18.
Rear parcel shelf bracket (RH&LH)
19.
Parcel shelf with rear waist
20.
Roof
21.
Front roof rail
22.
Front roof bow
23.
Center roof bow No.1
24.
Rear roof bow
25.
Center roof bow No.2
26.
Rear roof rail
27.
Roof assembly
28.
Rear fender (LH)
29.
Rear fender (RH)
30.
Rear combination lamp base
31.
Fuel filler lid
32.
Trunk lid
33.
Rear panel assembly
34.
Front door assembly (RH&LH)
35.
Outer front door panel (RH&LH)
36.
Rear door assembly (RH&LH)
37.
Outer rear door panel (RH&LH)
38.
Front bumper reinforcement
39.
Rear bumper reinforcement
BODY REPAIR
BL-227
C
D
E
F
G
H
J
K
L
M
A
B
BL
2006 Q45
Corrosion Protection
NIS000Y4
DESCRIPTION
To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in
NISSAN production plants. When repairing or replacing body panels, it is necessary to use the same anti-cor-
rosive measures.
Anti-corrosive Precoated Steel (Galvannealed Steel)
To improve repairability and corrosion resistance, a new type of anti-
corrosive precoated steel sheet has been adopted replacing conven-
tional zinc-coated steel sheet.
Galvannealed steel is electroplated and heated to form Zinc-iron
alloy, which provides excellent and long term corrosion resistance
with cationic electrodeposition primer.
Nissan Genuine Service Parts are fabricated from galvannealed steel. Therefore, it is recommended that
GENUINE NISSAN PARTS or equivalent be used for panel replacement to maintain the anti-corrosive perfor-
mance built into the vehicle at the factory.
Phosphate Coating Treatment and Cationic Electrodeposition Primer
A phosphate coating treatment and a cationic electrodeposition primer, which provide excellent corrosion pro-
tection, are employed on all body components.
CAUTION:
Confine paint removal during welding operations to an absolute
minimum.
Nissan Genuine Service Parts are also treated in the same manner. Therefore, it is recommended that GENU-
INE NISSAN PARTS or equivalent be used for panel replacement to maintain anti-corrosive performance built
into the vehicle at the factory.
SIIA2294E
PIIA0095E
BL-228
BODY REPAIR
2006 Q45
ANTI-CORROSIVE WAX
To improve corrosion resistance, anti-corrosive wax is applied inside the body sill and inside other closed sec-
tions. Accordingly, when replacing these parts, be sure to apply anti-corrosive wax to the appropriate areas of
the new parts. Select an excellent anti-corrosive wax which will penetrate after application and has a long shelf
life.
PIIA0096E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст