Infiniti Q45. Manual — part 240

BODY REPAIR

BL-229

C

D

E

F

G

H

J

K

L

M

A

B

BL

2006 Q45

UNDERCOATING

The underside of the floor and wheelhouse are undercoated to prevent rust, vibration, noise and stone chip-
ping. Therefore, when such a panel is replaced or repaired, apply undercoating to that part. Use an undercoat-
ing which is rust preventive, soundproof, vibration-proof, shock-resistant, adhesive, and durable.

Precautions in Undercoating

1.

Do not apply undercoating to any place unless specified (such as the areas above the muffler and three
way catalyst which are subjected to heat).

2.

Do not undercoat the exhaust pipe or other parts which become hot.

3.

Do not undercoat rotating parts.

4.

Apply bitumen wax after applying undercoating.

PIIA0097E

BL-230

BODY REPAIR

2006 Q45

Body Sealing

NIS000Y5

DESCRIPTION

The following figure shows the areas which are sealed at the factory. Sealant which has been applied to these
areas should be smooth and free from cuts or gaps. Care should be taken not to apply an excess amount of
sealant and not to allow other unaffected parts to come into contact with the sealant.

PIIA0098E

BODY REPAIR

BL-231

C

D

E

F

G

H

J

K

L

M

A

B

BL

2006 Q45

PIIA0099E

BL-232

BODY REPAIR

2006 Q45

PIIA0100E