Infiniti Q45. Manual — part 542
BODY SIDE TRIM
EI-47
C
D
E
F
G
H
J
K
L
M
A
B
EI
5.
Remove cap and screw of rear pillar finisher.
6.
Remove clips, and remove rear pillar finisher.
Installation
Install in the reverse order of removal.
CAUTION:
To install, check if all clips are matched over holes of panel on vehicle, then push on.
MUDGUARD FINISHER (FRONT/REAR)
Removal
1.
Remove clips of mudguard finisher.
2.
Remove pawls, and remove mudguard finisher (front/rear).
Installation
Install in the reverse order of removal.
PIIA9279E
EI-48
REAR PARCEL SHELF FINISHER
REAR PARCEL SHELF FINISHER
PFP:79910
Removal and Installation
NIS0011P
REMOVAL
1.
Remove rear seat. Refer to
SE-191, "Removal and Installation"
2.
Remove rear seat belt floor anchor bolts. Refer to
SB-5, "Removal and Installation of Rear Seat Belt"
3.
Remove rear pillar finisher. Refer to
EI-43, "Removal and Installation"
PIIB1961E
1.
Rear parcel shelf finisher
2.
Seat belt escutcheon
3.
High mounted stop lamp
4.
Woofer grille
5.
Rear sunshade
6.
Top tether strap child restraint
cover
7.
Bolt
REAR PARCEL SHELF FINISHER
EI-49
C
D
E
F
G
H
J
K
L
M
A
B
EI
4.
Remove high-mounted stop lamp, and disconnect harness con-
nector.
5.
Remove woofer grille.
6.
Remove seat belt escutcheon.
7.
Remove clips, and remove rear parcel shelf finisher.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
●
Confirm hooks of rear parcel shelf finisher are completely inserted into holes on vehicle side.
●
Confirm clips are matched over holes on vehicle side, then push on.
Removal of rear sunshade
1.
Remove bolts of rear sunshade.
2.
Disconnect rear sunshade harness connector.
3.
Remove rear sunshade assembly.
Installation of rear sunshade
Install in the reverse order of removal.
SIIA0820E
SIIA0821E
EI-50
SUNSHADE
SUNSHADE
PFP:97580
Component Parts and Harness Connector Location
NIS0011Q
CIIM0010E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст