Infiniti Q45. Manual — part 541
BODY SIDE TRIM
EI-43
C
D
E
F
G
H
J
K
L
M
A
B
EI
BODY SIDE TRIM
PFP:76913
Removal and Installation
NIS0011O
CAUTION:
●
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
●
When removing or installing body side welts, do not allow butyl seal to come in contact with pillar
garnish.
1.
Front pillar garnish
2.
Dash side finisher
3.
Front body side welt
4.
Front kicking plate
5.
Center pillar garnish
6.
Center pillar lower garnish
7.
Rear body side welt
8.
Rear kicking plate
9.
Rear pillar finisher
10.
Rear wheelhouse garnish
11.
Center pillar upper cap
12.
Rear pillar upper cap
13.
Mudguard finisher (front)
14.
Mudguard finisher (rear)
PIIB1699E
EI-44
BODY SIDE TRIM
FRONT PILLAR GARNISH
Removal
1.
Remove front body side welt.
2.
Remove clips, and remove front pillar garnish.
Installation
Install in the reverse order of removal.
DASH SIDE FINISHER
Removal
1.
Remove front kicking plate.
2.
Remove clips and resin nut of dash side finisher.
3.
Remove dash side finisher.
Installation
Install in the reverse order of removal.
FRONT BODY SIDE WELT
Removal
Remove front body side welt.
Installation
Install in the reverse order of removal.
FRONT KICKING PLATE
Removal
Remove clips, and remove front kicking plate.
Installation
Install in the reverse order of removal.
PIIA9272E
PIIA9273E
PIIA9274E
BODY SIDE TRIM
EI-45
C
D
E
F
G
H
J
K
L
M
A
B
EI
REAR KICKING PLATE
Removal
Remove clips, and remove rear kicking plate.
Installation
Install in the reverse order of removal.
REAR BODY SIDE WELT
Removal
Remove rear body side welt.
Installation
Install in the reverse order of removal.
CENTER PILLAR LOWER GARNISH
Removal
1.
Remove front and rear kicking plate.
2.
Remove front and rear body side welt.
3.
Remove screw, and remove rear cooler inlet grille.
4.
Remove clips, and remove center pillar lower garnish.
Installation
Install in the reverse order of removal.
CENTER PILLAR UPPER GARNISH
Removal
1.
Remove front seat belt shoulder anchor. Refer to
SB-3, "Removal and Installation of Front Seat Belt"
2.
Remove front and rear body side welt.
3.
Remove front and rear kicking plate.
4.
Remove center pillar lower garnish.
PIIA9275E
PIIA9276E
EI-46
BODY SIDE TRIM
5.
Remove cap and screw of center pillar upper garnish.
6.
Remove center pillar upper garnish.
Installation
Install in the reverse order of removal.
REAR WHEELHOUSE GARNISH
Removal
1.
Remove rear seat cushion.Refer to
.
2.
Remove rear kicking plate.
3.
Remove rear body side welt.
4.
Remove clips, and remove rear wheelhouse garnish.
NOTE:
Insert screwdriver rolled with cloth between panel on vehicle and
clips (as indicated with arrow).
Installation
Install in the reverse order of removal.
REAR PILLAR FINISHER
Removal
1.
Remove rear seat. Refer to
SE-191, "Removal and Installation"
2.
Remove rear kicking plate.
3.
Remove rear wheelhouse garnish.
4.
Remove rear body side welt.
PIIA9277E
PIIA9278E
SIIA0810E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст