Infiniti Q45. Manual — part 90
DISASSEMBLY
AT-273
D
E
F
G
H
I
J
K
L
M
A
B
AT
58. Remove reverse brake piston from transmission case with com-
pressed air. Refer to
CAUTION:
Care should be taken not to abruptly blow air. It makes pis-
tons incline, as the result, it becomes hard to disassemble
the pistons.
59. Remove D-rings from reverse brake piston.
60. Use a pin punch [4mm (0.16 in) dia. commercial service tool] to
knock out retaining pin.
61. Remove manual shaft retaining pin with a pair of nippers.
SCIA5047E
SCIA6330E
SCIA2328E
SCIA2329E
AT-274
DISASSEMBLY
62. Remove manual plate (with parking rod) from manual shaft.
63. Remove parking rod from manual plate.
64. Remove manual shaft from transmission case.
65. Remove manual shaft oil seals using a flat-bladed screwdriver.
CAUTION:
Be careful not to scratch transmission case.
66. Remove detent spring and spacer from transmission case.
SCIA5715E
SCIA5220E
SCIA5716E
SCIA2331E
SCIA5248E
DISASSEMBLY
AT-275
D
E
F
G
H
I
J
K
L
M
A
B
AT
67. Using a pair of snap ring pliers, remove snap ring from transmis-
sion case.
68. Remove servo assembly (with return spring) from transmission
case.
69. Remove return spring from servo assembly.
70. Remove O-rings from servo assembly.
71. Remove parking actuator support (1) from output shaft & com-
panion flange complement.
SCIA2333E
SCIA5679E
SCIA5717E
SCIA5719E
SCIA7065E
AT-276
DISASSEMBLY
72. Remove parking pawl (with return spring) (1) and pawl shaft (2)
from output shaft & companion flange complement.
73. Remove return spring (1) from parking pawl (2).
SCIA7066E
SCIA6180J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст