Infiniti G37 Coupe. Manual — part 12
ADP-42
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
JMJIA0844ZZ
13. Driver side door switch B16
14. A/T device (detention switch) M137
15. Parking brake switch B14
16. Door mirror (driver side) D3
17. Telescopic motor M49
18. Tilt motor M49
19. Forward switch B512
20. Sliding limit switch B514
21. Power walk-in switch B513
22.
Seat belt buckle switch (driver side)
B13
H.
View with center console assembly
is removed.
I.
View with center console assembly
is removed.
J.
View with instrument driver lower
panel is removed.
K.
View with seat back pad is removed. L.
View with seat cushion pad is re-
moved.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-43
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
POWER WALK-IN FUNCTION : Component Description
INFOID:0000000001838023
CONTROL UNITS
INPUT PARTS
Switches
Sensors
JMJIA0845ZZ
23. Reclining motor B523
24. Reclining relay (backward) B520
25. Reclining relay (forawrd) B519
26.
Reclining switch
(Power seat switch B510)
27.
Sliding, lifting switch
(Power seat switch B510)
28. Sliding sensor B526
29. Lifting motor (front) B527
30. Sliding motor B525
31. Lifting motor (rear) B529
M.
View with seat cushion pad and seat-
back pad are removed.
N.
Backside of seat cushion
Item
Function
Driver seat control unit
• Main units of automatic drive positioner system
• It is connected to the CAN.
• It communicates with the automatic drive positioner control via UART communi-
cation.
BCM
Transmit the following status to the driver seat control unit via CAN communication.
• Driver door: OPEN/CLOSE
• Starter: CRANKING/OTHER
Unified meter and A/C amp.
Transmit the vehicle speed signal to the driver seat control unit via CAN communi-
cation.
Item
Function
Front door switch (driver side)
Detect front door (driver side) open/close status.
Power walk-in switch
Perform the power walk-in operation by operating the power walk-in switch.
Sliding limit switch
Detect the front end position of seat sliding during the power walk-in function front-
ward operation.
Seat belt buckle switch
Detect the seat belt fastening/releasing condition.
Forward switch
Detect the folded up/folded down condition of seatback that is the operation condi-
tion of power walk-in function.
Item
Function
Sliding sensor
Detect the forward/backward position of seat.
ADP-44
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
OUTPUT PARTS
Item
Function
Sliding motor
Slide the seat forward/backward.
DIAGNOSIS SYSTEM (DRIVER SEAT C/U)
ADP-45
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DIAGNOSIS SYSTEM (DRIVER SEAT C/U)
Diagnosis Description
INFOID:0000000001693647
The automatic drive positioner system can be checked and diagnosed for component operation with CON-
SULT-III.
DIAGNOSTIC MODE
CONSULT-III Function
INFOID:0000000001693648
SELF DIAGNOSTIC RESULTS
.
DATA MONITOR
Diagnostic mode
Description
SELF-DIAG RESULTS
Performs self-diagnosis for the auto drive positioner system and displays the results.
DATA MONITOR
Displays input signals transmitted from various switches and sensors to driver seat con-
trol unit in real time.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
ACTIVE TEST
Drive each output device.
ECU PART NUMBER
Displays part numbers of driver seat control unit parts.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
SET SW
“ON/OFF”
×
×
ON/OFF status judged from the setting switch signal.
MEMORY SW 1
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 1 sig-
nal.
MEMORY SW 2
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 2 sig-
nal.
SLIDE SW–FR*
3
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (forward) sig-
nal.
SLIDE SW–RR*
3
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (backward)
signal.
RECLN SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (forward)
signal.
RECLN SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (backward)
signal.
LIFT FR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (upward)
signal.
LIFT FR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (down-
ward) signal.
LIFT RR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (upward)
signal.
LIFT RR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (down-
ward) signal.
MIR CON SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (upward) sig-
nal.
MIR CON SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (downward)
signal.
MIR CON SW–RH
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (passenger side) signal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст