Infiniti G37 Coupe. Manual — part 706
EXT-38
< ON-VEHICLE REPAIR >
TRUNK LID FINISHER
3.
Remove trunk lid finisher outer mounting nuts (A).
4.
Apply protection tape (A) around outer circumference of trunk lid
finisher outer (1).
5.
Remove trunk lid finisher outer (1), using remover tool (B).
CAUTION:
Be careful not to damage the body.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Install after cleaning adhesive parts of body side and back of finisher outer.
• When installing door finisher, check that clips are securely fitted in panel holes on body, and then-
press them in.
TRUNK DRIP COVER
JMKIA1253ZZ
: Clip
JMKIA1254ZZ
TRUNK LID FINISHER
EXT-39
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
TRUNK DRIP COVER : Exploded View
INFOID:0000000001737292
Refer to
for symbols in the figure.
TRUNK DRIP COVER : Removal and Installation
INFOID:0000000001737291
REMOVAL
1.
Fully open trunk lid.
2.
Remove double-faced adhesive tape (A) of trunk drip cover (1)
with remover tool (B).
1.
Trunk lid finisher outer
2.
Trunk lid panel assembly
3.
Rivet
4.
Trunk drip cover RH
5.
Trunk drip cover LH
6.
Double-faced adhesive tape
[t: 4.0 mm (0.157 in)]
7.
Double-faced adhesive tape
[t: 2.5 mm (0.098 in)]
: Clip
: Metal clip
JMKIA1252ZZ
JMKIA1258ZZ
EXT-40
< ON-VEHICLE REPAIR >
TRUNK LID FINISHER
3.
Disengage trunk drip cover (1) fixing clip using remover tool (A).
4.
Disengage trunk drip cover (1) fixing metal clip using remover
tool (A).
5.
Slide forward then remove drip cover (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Double-faced adhesive tape is not reusable, always use new double-faced adhesive tape.
• To secure contact, do not wash vehicle with in 24 hours after installation.
: Clip
JMKIA1262ZZ
: Metal clip
JMKIA1263ZZ
JMKIA1264ZZ
REAR SPOILER
EXT-41
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
REAR SPOILER
Exploded View
INFOID:0000000001677500
Refer to
for symbols in the figure.
Removal and Installation
INFOID:0000000001677501
REMOVAL
1.
Remove trunk lid finisher inner. Refer to
INT-29, "Removal and Installation"
1.
Rear spoiler assembly
2.
Trunk lid panel assembly
3.
Grommet
4.
Rear view camera assembly
5.
High-mounted stop lamp
6.
Double-faced adhesive tape
[t: 2.0mm (0.079 in)]
: Clip
JMKIA1259ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст