Infiniti FX35, FX50 (S51). Manual — part 1002
EXL-4
Removal and Installation . . . . . . . . . ...
Replacement . . . . . . . . . . . . . . .
OPTICAL SENSOR . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
LIGHTING & TURN SIGNAL SWITCH . . .
Exploded View . . . . . . . . . . . . . ...
HEADLAMP AIMING SWITCH . . . . . .
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
HAZARD SWITCH . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ...
AFS CONTROL UNIT . . . . . . . . . ..
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
STEERING ANGLE SENSOR . . . . . . .
Removal and Installation . . . . . . . . . ...
HEIGHT SENSOR . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
REAR COMBINATION LAMP . . . . . . ..
Exploded View . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
Replacement . . . . . . . . . . . . . . .
HIGH-MOUNTED STOP LAMP . . . . . .
Exploded View . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
BACK-UP LAMP . . . . . . . . . . . ..
Exploded View . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
Replacement . . . . . . . . . . . . . . .
LICENSE PLATE LAMP . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
Replacement . . . . . . . . . . . . . . .
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . .
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . .
DIAGNOSIS AND REPAIR WORKFLOW
EXL-5
< BASIC INSPECTION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000005244651
OVERALL SEQUENCE
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
Interview the symptom to the customer.
JPLIA0313GB
EXL-6
< BASIC INSPECTION >
[XENON TYPE]
DIAGNOSIS AND REPAIR WORKFLOW
>> GO TO 2.
2.
SYMPTOM CHECK
Check the symptom from the customer's information.
>> GO TO 3.
3.
BASIC INSPECTION
Check the operation of each part. Check that any symptom occurs other than the interviewed symptom.
>> GO TO 4.
4.
SELF-DIAGNOSIS WITH CONSULT-III
Perform the self-diagnosis with CONSULT-III. Check that any DTC is detected.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 6.
5.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 9.
6.
FAIL-SAFE ACTIVATION CHECK
Check that the symptom is applied to the fail-safe activation.
Does the fail-safe activate?
YES
>> GO TO 7.
NO
>> GO TO 8.
7.
SYSTEM DIAGNOSIS
Perform the system diagnosis for the system that the fail-safe activates. Specify the malfunctioning part.
>> GO TO 9.
8.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 9.
9.
MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 10.
10.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)
Perform the self-diagnosis with CONSULT-III. Check that any DTC is not detected. Erase DTC if DTC is
detected before the repair. Check that DTC is not detected again.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 11.
11.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES
>> INSPECTION END
NO
>> GO TO 3.
INSPECTION AND ADJUSTMENT
EXL-7
< BASIC INSPECTION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000005244652
Perform “LEVELIZER ADJUSTMENT” with CONSULT-III when replacing the height sensor.
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Re-
quirement
INFOID:0000000005244653
1.
LEVELIZER ADJUSTMENT
Perform “LEVELIZER ADJUSTMENT”.
>> Refer to
EXL-7, "LEVELIZER ADJUSTMENT : Special Repair Requirement"
LEVELIZER ADJUSTMENT
LEVELIZER ADJUSTMENT : Description
INFOID:0000000005244654
Perform “LEVELIZER ADJUSTMENT” when installing, removing, and replacing the height sensor and the sus-
pension components.
LEVELIZER ADJUSTMENT : Special Repair Requirement
INFOID:0000000005244655
1.
CHECK VEHICLE CONDITION
1.
Park the vehicle in the straight-forward position.
2.
Unload the vehicle (no passenger aboard).
>> GO TO 2.
2.
LEVELIZER ADJUSTMENT
CONSULT-III WORK SUPPORT
1.
Select "LEVELIZER ADJUSTMENT" of ADAPTIVE LIGHT work support item.
2.
Select "START".
3.
When "ADJUSTMENT IS COMPLETED", select "END".
CAUTION:
If "CAN NOT BE TESTED" is indicated, AFS control unit detects that the height sensor signal
changes. The levelizer adjustment is cancelled. In this case, turn the ignition switch OFF to pre-
vent the vehicle from the height change. Perform the levelizer adjustment again.
Is the levelizer adjustment completed?
YES
>> GO TO 3.
NO
>> Perform the levelizer adjustment again.
3.
SELF-DIAGNOSIS RESULT CHECK
Perform self-diagnosis with CONSULT-III. Check that any DTC is not detected.
Is any DTC detected?
YES
>> GO TO 2.
NO
>> Levelizer adjustment completed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст