Infiniti FX35, FX50 (S51). Manual — part 522
KEY REMINDER FUNCTION DOES NOT OPERATE
DLK-211
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY REMINDER FUNCTION DOES NOT OPERATE
Description
INFOID:0000000005239679
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Understand the operation when does it work, refer to
DLK-36, "KEY REMINDER FUNCTION : System
.
Diagnosis Procedure
INFOID:0000000005239680
1.
CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT”
Check “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.
Refer to
DLK-54, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.
2.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-69, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(luggage room).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK UNLOCK SENSOR
Check unlock sensor.
Refer to
DLK-92, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-212
< SYMPTOM DIAGNOSIS >
KEY WARNING DOES NOT OPERATE
KEY WARNING DOES NOT OPERATE
Description
INFOID:0000000005239681
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-39, "WARNING FUNCTION : System
.
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000005239682
1.
CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
DLK-108, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-69, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK KEY SLOT
Check key slot.
Refer to
DLK-101, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-107, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK KEY SLOT ILLUMINATION
Check key slot illumination.
Refer to
DLK-103, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
OFF POSITION WARNING DOES NOT OPERATE
DLK-213
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
OFF POSITION WARNING DOES NOT OPERATE
Description
INFOID:0000000005239683
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-39, "WARNING FUNCTION : System
.
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000005239684
1.
CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES
>> GO TO 2.
NO
>> Check DTC for BCM. Refer to
2.
CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
DLK-108, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-97, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-69, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-214
< SYMPTOM DIAGNOSIS >
P POSITION WARNING DOES NOT OPERATE
P POSITION WARNING DOES NOT OPERATE
Description
INFOID:0000000005239685
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-39, "WARNING FUNCTION : System
.
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000005239686
1.
CHECK TRANSMISSION RANGE SWITCH
Check DTC for BCM.
Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-97, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
DLK-108, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-69, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(console).
(luggage room).
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-107, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunctioning parts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст