Infiniti FX35, FX50 (S51). Manual — part 1201
INL-4
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000005245542
OVERALL SEQUENCE
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
Interview the symptom to the customer.
JPLIA0313GB
DIAGNOSIS AND REPAIR WORK FLOW
INL-5
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
>> GO TO 2.
2.
SYMPTOM CHECK
Check the symptom from the customer's information.
>> GO TO 3.
3.
BASIC INSPECTION
Check the operation of each part. Check that any symptom occurs other than the interviewed symptom.
>> GO TO 4.
4.
SELF-DIAGNOSIS WITH CONSULT-III
Perform the self-diagnosis with CONSULT-III. Check that any DTC is detected.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 6.
5.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 9.
6.
FAIL-SAFE ACTIVATION CHECK
Check that the symptom is applied to the fail-safe activation.
Does the fail-safe activate?
YES
>> GO TO 7.
NO
>> GO TO 8.
7.
SYSTEM DIAGNOSIS
Perform the system diagnosis for the system that the fail-safe activates. Specify the malfunctioning part.
>> GO TO 9.
8.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 9.
9.
MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 10.
10.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)
Perform the self-diagnosis with CONSULT-III. Check that any DTC is not detected. Erase DTC if DTC is
detected before the repair. Check that DTC is not detected again.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 11.
11.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES
>> INSPECTION END
NO
>> GO TO 3.
INL-6
< SYSTEM DESCRIPTION >
INTERIOR ROOM LAMP CONTROL SYSTEM
SYSTEM DESCRIPTION
INTERIOR ROOM LAMP CONTROL SYSTEM
System Diagram
INFOID:0000000005245543
System Description
INFOID:0000000005245544
OUTLINE
JPLIA1206GB
INTERIOR ROOM LAMP CONTROL SYSTEM
INL-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
Interior room lamps and illuminations are controlled by each function of the total illumination control unit and
BCM.
Total Illumination Control Unit
Function
• Interior room lamp control function
Lamp control
• Push-button ignition switch illumination
• Map lamp and personal lamps (when map lamp main switch is in DOOR position.)
• Puddle lamps
• Mood lamps (Door armrest)
• Foot lamps
• Center console indirect illumination
• Each illumination (Clock, switches, etc.)
BCM
Function
• Interior room lamp timer function
• Welcome light function (Welcome light function is controlled by Intelligent Key system. Refer to
"WELCOME LIGHT FUNCTION : System Description"
• Step lamp control function
Lamp control
• Step lamp
HOSPITALITY LIGHTING SYSTEM
• Hospitality lighting system is controlled by the total illumination control unit, BCM and combination meter.
• Hospitality lighting system controls each interior room lamp by each unit to show the driver hospitality.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст