Infiniti FX35, FX50 (S51). Manual — part 417
CCS-488
< DTC/CIRCUIT DIAGNOSIS >
[LDW & LDP]
U0100 LDP) ECM CAN CIR2
NO
>> Replace ABS actuator and electric unit (control unit).
CCS
U0101 LDP) TCM CAM CAN CIR2
CCS-489
< DTC/CIRCUIT DIAGNOSIS >
[LDW & LDP]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U0101 LDP) TCM CAM CAN CIR2
DTC Logic
INFOID:0000000005502103
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
>> GO TO 2.
2.
DTC CONFIRMATION
1.
Turn ignition switch ON and wait for 2 seconds or more.
2.
Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC “U0101” detected?
YES
>> Refer to
CCS-489, "Diagnosis Procedure"
NO
>> Refer to
GI-36, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000005502104
1.
PERFORM SELF-DIAGNOSIS OF TCM
Perform self-diagnosis of TCM with CONSULT-III.
Is any DTC detected?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
TCM TROUBLE DIAGNOSIS
Perform trouble diagnosis of TCM. Refer to
(VK50VE).
>> GO TO 3.
3.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U0101” erased?
YES
>> INSPECTION END
NO
>> Replace ABS actuator and electric unit (control unit).
4.
PROVISIONAL REPLACEMENT OF TCM
Remove TCM. Install a normal TCM.
>> GO TO 5.
5.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U0101” erased?
YES
>> Replace TCM.
DTC
No.
Trouble diagnosis
name
DTC detecting condition
DTC erase conditions
Possible cause
U0101
LDP) TCM CAN CIR2
ABS actuator and electric unit (control
unit) detected an error of CAN com-
munication signal that was received
from TCM.
Erase DTC with CON-
SULT-III
• TCM
• ABS actuator and electric
unit (control unit)
CCS-490
< DTC/CIRCUIT DIAGNOSIS >
[LDW & LDP]
U0101 LDP) TCM CAM CAN CIR2
NO
>> Replace ABS actuator and electric unit (control unit).
CCS
U0104 LDP) ICC CAM CAN CIR2
CCS-491
< DTC/CIRCUIT DIAGNOSIS >
[LDW & LDP]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U0104 LDP) ICC CAM CAN CIR2
DTC Logic
INFOID:0000000005502105
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
>> GO TO 2.
2.
DTC CONFIRMATION
1.
Turn ignition switch ON and wait for 2 seconds or more.
2.
Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC “U0104” detected?
YES
>> Refer to
CCS-491, "Diagnosis Procedure"
NO
>> Refer to
GI-36, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000005502106
1.
PERFORM SELF-DIAGNOSIS OF ICC SENSOR INTEGRATED UNIT
Perform ICC sensor integrated unit self-diagnosis with CONSULT-III.
Is any DTC detected?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
ICC SENSOR INTEGRATED UNIT TROUBLE DIAGNOSIS
Perform trouble diagnosis of ICC sensor integrated unit. Refer to
>> GO TO 3.
3.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U0104” erased?
YES
>> INSPECTION END
NO
>> Replace ABS actuator and electric unit (control unit).
4.
PROVISIONAL REPLACEMENT OF ICC SENSOR INTEGRATED UNIT
Remove ICC sensor integrated unit. Install a normal ICC sensor integrated unit.
>> GO TO 5.
5.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U0104” erased?
YES
>> Replace ICC sensor integrated unit.
NO
>> Replace ABS actuator and electric unit (control unit).
DTC
No.
Trouble diagnosis
name
DTC detecting condition
DTC erase conditions
Possible cause
U0104
LDP) ICC CAM CAN
CIR2
ABS actuator and electric unit (control
unit) detected an error of CAN com-
munication signal that was received
from ICC sensor integrated unit.
Erase DTC with CON-
SULT-III
• ICC sensor integrated unit
• ABS actuator and electric
unit (control unit)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст