Infiniti FX35, FX50 (S51). Manual — part 578
SIDE OIL SEAL
DLN-147
< REMOVAL AND INSTALLATION >
[FRONT FINAL DRIVE: F160A]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
REMOVAL AND INSTALLATION
SIDE OIL SEAL
RIGHT SIDE
RIGHT SIDE : Exploded View
INFOID:0000000005249189
VQ35HR
VK50VE
JPDID0220ZZ
1.
Front final drive assembly
2.
Side oil seal (right side)
A:
Oil seal lip
: Vehicle front
: Apply gear oil.
: Apply multi-purpose grease.
Refer to
for symbols not described above.
JPDID0219ZZ
1.
Front final drive assembly
2.
Side oil seal (right side)
A:
Oil seal lip
: Vehicle front
: Apply gear oil.
: Apply multi-purpose grease.
Refer to
DLN-148
< REMOVAL AND INSTALLATION >
[FRONT FINAL DRIVE: F160A]
SIDE OIL SEAL
RIGHT SIDE : Removal and Installation
INFOID:0000000005249190
REMOVAL
1.
Remove the front drive shaft. Refer to
2.
Remove the side oil seal using a puller (A) [SST: KV381054S0
(J-34286)].
CAUTION:
Never damage gear carrier.
INSTALLATION
1.
Apply multi-purpose grease to sealing lips of side oil seal.
2.
Using the drift (A) [SST: ST33400001 (J-26082)], press-fit side
oil seal so that its surface comes face-to-face with the end sur-
face of the side retainer.
CAUTION:
• Never reuse oil seal.
• When installing, never incline oil seal.
3.
Install the front drive shaft. Refer to
.
4.
When oil leaks while removing, check oil level after the installa-
tion. Refer to
.
LEFT SIDE
LEFT SIDE : Exploded View
INFOID:0000000005249191
VQ35HR
PDIA0838J
PDIA0787J
JSDIA0823ZZ
1.
Front final drive assembly
2.
Side oil seal (left side)
A:
Oil seal lip
: Vehicle front
: Apply gear oil.
SIDE OIL SEAL
DLN-149
< REMOVAL AND INSTALLATION >
[FRONT FINAL DRIVE: F160A]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
VK50VE
LEFT SIDE : Removal and Installation
INFOID:0000000005249192
REMOVAL
1.
Remove the front final drive assembly from vehicle with power tool. Refer to
DLN-151, "VK50VE : Exploded View"
(VK50VE).
NOTE:
Left side oil seal is attached to engine assembly. Replace it after removing front final drive assem-
bly from vehicle.
2.
Remove the side oil seal using a flat-bladed screwdriver.
CAUTION:
Never damage gear carrier.
INSTALLATION
1.
Apply multi-purpose grease to sealing lips of side oil seal.
2.
Using the drift (A) [SST: KV38102100 (J-25803-01)], press-fit
side oil seal so that its surface comes face-to-face with the end
surface of the gear carrier.
CAUTION:
• Never reuse oil seal.
• When installing, never incline oil seal.
3.
Install the front final drive assembly on vehicle. Refer to
(VK50VE).
4.
Install the front drive shaft. Refer to
.
5.
When oil leaks while removing, check oil level after the installa-
tion. Refer to
.
: Apply multi-purpose grease.
Refer to
for symbols not described above.
JSDIA0824ZZ
1.
Front final drive assembly
2.
Side oil seal (left side)
A:
Oil seal lip
: Vehicle front
: Apply gear oil.
: Apply multi-purpose grease.
Refer to
for symbols not described above.
PDIA0788J
DLN-150
< UNIT REMOVAL AND INSTALLATION >
[FRONT FINAL DRIVE: F160A]
FRONT FINAL DRIVE ASSEMBLY
UNIT REMOVAL AND INSTALLATION
FRONT FINAL DRIVE ASSEMBLY
VQ35HR
VQ35HR : Exploded View
INFOID:0000000005249193
VQ35HR : Removal and Installation
INFOID:0000000005249194
REMOVAL
1.
Remove engine assembly from the vehicle. Refer to
EM-87, "AWD : Removal and Installation"
2.
Separate engine assembly and suspension member.
3.
Remove engine mounting bracket (RH) (lower). Refer to
.
4.
Remove air breather hose and tube.
5.
Remove side shaft. Refer to
.
6.
Remove final drive assembly mounting bolts with power tool and separate front final drive assembly from
engine.
INSTALLATION
Note the following, install in the reverse order of removal.
• When installing the side shaft, apply multi-purpose grease to contact surface of side shaft and side shaft oil
seal.
1.
Breather tube
2.
Breather hose
3.
Front final drive assembly
4.
Bushing
5.
Side shaft
: Vehicle front
Refer to
for symbols in the figure.
JPDID0221GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст