Infiniti FX35, FX50 (S51). Manual — part 565
MAIN SHAFT
DLN-95
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13C]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
7.
Install spacer (1) and steel ball (2) to main shaft.
CAUTION:
Be careful not to drop the steel ball.
8.
Install snap ring (1) to main shaft.
CAUTION:
Never reuse snap ring.
9.
Install main shaft assembly to rear case, then install front case
and rear case. Refer to
.
VK50VE : Inspection
INFOID:0000000005525037
Check items below. If necessary, replace them with new ones.
CASES
• Contact surfaces of bearing for wear, damage, etc.
• Damage and cracks of case.
BEARING
Damage and rough rotation of bearing.
SHAFT
JPDIE0124ZZ
JPDIE0137ZZ
JPDIE0120ZZ
PDIA0300E
DLN-96
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13C]
MAIN SHAFT
Damage, peeling, dent, uneven wear, bending, etc. of shaft.
GEARS AND CHAIN
• Excessive wear, damage, peeling, etc. of gear .
• Cracks, damage, wear, etc. of drive chain.
JPDIE0121ZZ
JPDIE0136ZZ
FRONT DRIVE SHAFT AND DRIVE CHAIN
DLN-97
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13C]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
FRONT DRIVE SHAFT AND DRIVE CHAIN
VQ35HR
VQ35HR : Exploded View
INFOID:0000000005249133
1.
Plug
2.
Drive chain
3.
Front drive shaft rear bearing
4.
Front drive shaft
5.
Front drive shaft front bearing
6.
Sprocket
7.
Needle bearing
8.
Main shaft
9.
Oil pump
10. Spacer
11.
Steel ball
12. Snap ring
13. Snap ring
14. Main shaft bearing
15. Front case
16. Main shaft oil seal
17. Front oil seal
18. Spacer
19. Snap ring
20. Circlip
21. Electric controlled coupling
22. Oil cover
23. O-ring
24. Retainer
25. Transfer fluid temperature sensor
26. Baffle plate
27. Spacer
28. Snap ring
29. Dowel pin
30. Rear case
31. Harness bracket
32. Breather tube
33. Filler plug
34. Gasket
35. Drain plug
36. Rear bearing
37. Snap ring
38. Spacer
39. Rear oil seal
40. Companion flange
41. Self-lock nut
A.
Oil seal lip
B.
Matching surface
JPDIE0200GB
DLN-98
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13C]
FRONT DRIVE SHAFT AND DRIVE CHAIN
VQ35HR : Disassembly
INFOID:0000000005249134
1.
Separate front case and rear case. Refer to
DLN-70, "VQ35HR : Disassembly"
2.
Remove drive chain and front drive shaft.
CAUTION:
Never use tools. Always remove by hand.
3.
Remove front drive shaft front bearing with the drift (A) and
replacer (B).
4.
Remove front drive shaft rear bearing with the drift (A) and
replacer (B).
5.
Remove plug from front drive shaft.
VQ35HR : Assembly
INFOID:0000000005249135
1.
Install plug to front drive shaft.
CAUTION:
Never reuse plug.
2.
Install front drive shaft front bearing with the drift (A) [SST:
ST33200000 (J-26082)].
: Apply Genuine Anaerobic Liquid Gasket or equivalent. Refer to
GI-16, "Recommended Chemical Products and Sealants"
.
: Apply petroleum jelly.
: Apply transfer fluid. Refer to
MA-12, "Fluids and Lubricants"
Refer to
for symbols not described above.
A:
Drift [SST: ST31214000 (J-25269-B)]
B:
replacer (commercial service tool)
JPDIE0084ZZ
A:
Drift [SST: ST31214000 (J-25269-B)]
B:
replacer (commercial service tool)
JPDIE0085ZZ
JPDIE0138ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст