Infiniti FX35, FX50 (S51). Manual — part 1516
REAR RH SIDE POWER WINDOW ALONE DOES NOT OPERATE
PWC-125
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
REAR RH SIDE POWER WINDOW ALONE DOES NOT OPERATE
WHEN POWER WINDOW MAIN SWITCH IS OPERATED
WHEN POWER WINDOW MAIN SWITCH IS OPERATED : Diagnosis Procedure
INFOID:0000000005248228
1.
CHECK REAR POWER WINDOW SWITCH RH SERIAL LINK CIRCUIT
Check rear power window switch RH serial link circuit.
Refer to
PWC-44, "REAR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
WHEN REAR POWER WINDOW SWITCH RH IS OPERATED
WHEN REAR POWER WINDOW SWITCH RH IS OPERATED : Diagnosis Procedure
INFOID:0000000005248229
1.
REPLACE REAR POWER WINDOW SWITCH RH
Replace rear power window switch RH.
Refer to
PWC-136, "Removal and Installation"
>> INSPECTION END
WHEN BOTH POWER WINDOW MAIN SWITCH AND REAR POWER WINDOW
SWITCH RH ARE OPERATED
WHEN BOTH POWER WINDOW MAIN SWITCH AND REAR POWER WINDOW
SWITCH RH ARE OPERATED : Diagnosis Procedure
INFOID:0000000005248230
1.
CHECK REAR POWER WINDOW SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check rear power window switch power supply and ground circuit.
Refer to
PWC-18, "REAR POWER WINDOW SWITCH : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK REAR POWER WINDOW MOTOR RH
Check rear power window motor RH.
Refer to
PWC-24, "REAR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
PWC-126
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
ANTI-PINCH FUNCTION DOES NOT OPERATE
ANTI-PINCH FUNCTION DOES NOT OPERATE
DRIVER SIDE
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000005248231
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to
PWC-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
.
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> GO TO 2.
2.
CHECK ENCODER (DRIVER SIDE) CIRCUIT
Check encoder (driver side) circuit.
Refer to
PWC-29, "DRIVER SIDE : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
PASSENGER SIDE
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000005248232
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to
PWC-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
.
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> GO TO 2.
2.
CHECK ENCODER (PASSENGER SIDE) CIRCUIT
Check encoder (passenger side) circuit.
Refer to
PWC-31, "PASSENGER SIDE : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
REAR LH
REAR LH : Diagnosis Procedure
INFOID:0000000005248233
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
ANTI-PINCH FUNCTION DOES NOT OPERATE
PWC-127
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Refer to
PWC-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> GO TO 2.
2.
CHECK ENCODER (REAR LH) CIRCUIT
Check encoder (rear LH) circuit.
Refer to
PWC-33, "REAR LH : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
REAR RH
REAR RH : Diagnosis Procedure
INFOID:0000000005248234
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to
PWC-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> GO TO 2.
2.
CHECK ENCODER (REAR RH) CIRCUIT
Check encoder (rear RH) circuit.
Refer to
PWC-35, "REAR RH : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
PWC-128
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATE NORMAL-
LY
AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATE NOR-
MALLY
DRIVER SIDE
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000005248235
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to
PWC-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK ENCODER (DRIVER SIDE) CIRCUIT
Check encoder (driver side) circuit.
Refer to
PWC-29, "DRIVER SIDE : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
PASSENGER SIDE
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000005248236
1.
PERFORM INITIALIZAITON PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to
PWC-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK ENCODER (PASSENGER SIDE) CIRCUIT
Check encoder (passenger side) circuit.
Refer to
PWC-31, "PASSENGER SIDE : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
REAR LH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст