Infiniti FX35, FX50 (S51). Manual — part 1517
AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATE NORMAL-
LY
PWC-129
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
REAR LH : Diagnosis Procedure
INFOID:0000000005248237
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to
PWC-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK ENCODER (REAR LH) CIRCUIT
Check encoder (rear LH) circuit.
Refer to
PWC-33, "REAR LH : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
REAR RH
REAR RH : Diagnosis Procedure
INFOID:0000000005248238
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to
PWC-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK ENCODER (REAR RH) CIRCUIT
Check encoder (rear RH) circuit.
Refer to
PWC-35, "REAR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
PWC-130
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPERATE
PROPERLY
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPER-
ATE PROPERLY
Diagnosis Procedure
INFOID:0000000005248239
1.
CHECK DOOR SWITCH
Check door switch.
Refer to
PWC-27, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
POWER WINDOW DOWN FUNCTION DOES NOT OPERATE WITH KEY CYLIN-
DER OPERATION
PWC-131
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW DOWN FUNCTION DOES NOT OPERATE WITH KEY
CYLINDER OPERATION
Diagnosis Procedure
INFOID:0000000005248240
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to
PWC-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK DRIVER SIDE DOOR LOCK ASSEMBLY (KEY CYLINDER SWITCH)
Check driver side door lock assembly (key cylinder switch).
Refer to
PWC-38, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
NO
>> GO TO 1.
PWC-132
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERATING
WITH INTELLIGENT KEY
POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERAT-
ING WITH INTELLIGENT KEY
Description
INFOID:0000000005248241
NOTE:
Before performing the diagnosis in the following procedure, check “ Work Flow”. Refer to
.
Diagnosis Procedure
INFOID:0000000005248242
1.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent key button?
YES
>> GO TO 2.
NO
>> Go to
.
2.
CHECK POWER WINDOW OPERATION
Check power window operation.
Does power window up/down with power window main switch?
YES
>> GO TO 3.
NO
>> Go to
PWC-16, "POWER WINDOW MAIN SWITCH : Diagnosis Procedure"
3.
CHECK “PW DOWN SET” SETTING IN “WORK SUPPORT”
Check “PW DOWN SET” setting in “WORK SUPPORT”.
Refer to
DLK-54, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “PW DOWN SET” setting in “WORK SUPPORT”.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст