Infiniti F50. Manual — part 309
VEHICLE INFORMATION AND INTEGRATED SWITCH SYSTEM /WITHOUT
NAVIGATION SYSTEM
DI-79
C
D
E
F
G
H
I
J
L
M
A
B
DI
Tire Pressure Information
1.
Select “Tire Pressure”.
2.
Tire pressure displayed as Tire Pressure information.
NOTE:
●
When air pressure becomes 180 kPa (1.8 kg/cm
2
, 26 psi) or
less, “LOW PRESSURE” warning is indicated.
●
When air pressure becomes 70 kPa (0.7 kg/cm
2
, 10 psi) or
less, “FLAT TIRE” warning is indicated.
●
When pressure is not detected or tire pressure system has
malfunction “** psi” is indicated.
●
Indication with yellow frame for the malfunctioning tire.
SETTING OF VEHICLE STATUS
●
Setting of electric status can be changed by multifunction switch.The signal is sent to BCM through AV
control unit to change vehicle electric system setting.
●
AV control unit is communicating with BCM and combination meter.
1.
Press “SETTING” switch to display vehicle information display.
2.
Select “Vehicle Electronic System”.
3.
Select a vehicle status shown on the display.
SKIA3737E
SKIA0605E
SKIA0606E
SKIA0608E
DI-80
VEHICLE INFORMATION AND INTEGRATED SWITCH SYSTEM /WITHOUT
NAVIGATION SYSTEM
Adjustable vehicle status
●
Lift Steering Column When Exiting Vehicle
●
Adjust Driver Seat When Exiting Vehicle
●
Illuminate Interior When Unlocking Vehicle
●
Interior Lights Off Delay
●
Sensitivity of Automatic Headlights
●
Automatic Headlights Off Delay
●
Key Remote Response - Horn/Lights
●
Remote Custom Settings
●
Return All Settings to Default
SKIA0610E
SKIA0611E
SKIA0612E
VEHICLE INFORMATION AND INTEGRATED SWITCH SYSTEM /WITHOUT
NAVIGATION SYSTEM
DI-81
C
D
E
F
G
H
I
J
L
M
A
B
DI
Adjustable vehicle status
Setting items
Setting variations
Initial setting
Operation
Lift Steering Column When Exiting Vehicle
ON/OFF
ON
The steering column automatically tilts up when
the driver gets out, and returns to the original
position when the driver gets on.
●
When driver door is closed and key removed
from ignition key cylinder, the steering column
tilts up.
●
When driver door is open and key is turned to
OFF, the steering column tilts up.
Adjust Driver Seat When Exiting Vehicle
ON/OFF
ON
The driver’s seat automatically slides backward
when the driver gets out, and returns to the origi-
nal position when the driver gets on.
Illuminate Interior When Unlocking Vehicle
ON/OFF
ON
The interior room lamps are illuminate automati-
cally when the door unlocked with key or key fob.
Interior Lights Off Delay
OFF/15/30/45 sec.
30 sec.
Interior room lamp timer period can be changed
in this mode. Selects interior room lamp timer.
Sensitivity of Automatic Headlights
1/2/3/4
3
Sensitivity of auto light sensor can be adjusted.
Automatic Headlights Off Delay
OFF/20/45/90/120/
150/180 sec.
45 sec.
Auto light delay off timer period can be changed
in this mode. Selects auto light delay off timer.
Key Remote Response - Horn/Lights
Hazard indicators
only
/Hazard indicators
and horn
Hazard indi-
cators only
Hazard indicators Only:
●
Lock operation: The hazard warning lamp flash
twice when lock the doors with key fob.
●
Unlock operation: No response.
Hazard indicators and horn:
●
Lock operation: The hazard warning lamp flash
twice and horn sounds once when lock the
doors with key fob.
●
Unlock operation; The hazard warning lamp
flash once when unlock the doors with key fob.
Remote Custom Settings
ON/OFF
ON
The driving position -seat and steering column-
and the audio setting -current source and radio
station presets- are set to the same condition you
made last time by identifying the key fob ID.
This function operates when unlock the doors by
using the key fob.
NOTE:
It is necessary to memorize the driving position
before using this function.
Return All Settings to Default
None
None
If this key is selected, all vehicle electronic sys-
tems setting are return to default.
DI-82
VEHICLE INFORMATION AND INTEGRATED SWITCH SYSTEM /WITHOUT
NAVIGATION SYSTEM
WARNING INDICATIONS
When combination meter receives warning signal from some control units or sensors, then combination meter
warning lamp is illuminated.
Then combination meter sends warning signal to AV control unit to display warning indications on the screen.
Warning indicators
Warning lamps in
instrument panel
Warning detection and cancel conditions
Cases of malfunction
MALFUNCTION
SERVICE
ENGINE
SOON
Detection condition
Warning lamp ON signal is detected
while engine is running.
ECM malfunction
Cancel condition
Warning lamp OFF signal is detected.
ENGINE OIL PRES-
SURE
Engine oil
pressure
Detection condition
Warning lamp ON signal is detected for
at least approx. 5 seconds while engine
is running.
[Engine oil pressure: MAX. approx. 29
kPa (0.3 kg/cm
2
, 4psi)]
Engine oil pressure
decreases
Cancel condition
Warning lamp OFF signal is detected.
[Engine oil pressure: MIN. approx. 29
kPa (0.3 kg/cm
2
, 4psi)]
SUPPLEMENTAL AIR
BAG
Air bag
Detection condition
Warning lamp ON signal is detected for
at least approx. 10 seconds after ignition
switch is turned ON.
SRS air bag system
malfunction
Cancel condition
Warning lamp OFF signal is detected.
LOW BRAKE FLUID
Brake
Detection condition
Warning lamp ON signal (fluid level) is
detected.
Low brake fluid level
Cancel condition
Warning lamp OFF signal is detected.
OVERHEATING
–
Detection condition
Engine coolant temperature as being
approx. 119
°
C (246
°
F) min.
Engine cooling system
malfunction
Cancel condition
Engine coolant temperature as being
approx. 105
°
C (221
°
F) max.
CHARGE
Charge
Detection condition
Warning lamp ON signal is detected
while engine is running. Charging sys-
tem malfunction
Charging system mal-
function
Cancel condition
Warning lamp OFF signal is detected.
LOW WASHER
FLUID
–
Detection condition
Washer liquid level falls below approx.
0.4
.(7/8 US qt, 3/4 Imp pt)
Low washer liquid level
Cancel condition
Except above condition.
LOW FUEL
Fuel level
Detection condition
After warning lamp ON signal is
detected, vehicle is driven for over spec-
ified distance. (Fuel level: Approx. 14.0
14-3/4 US qt,12-3/8 Imp pt)
Low fuel level
Cancel condition
Warning lamp OFF signal is detected.
PARKING BRAKE
Brake
Detection condition
Parking brake ON signal is detected
while vehicle is running [approx. 5 km/h
(3 MPH) or faster].
Parking brake remains
engaged.
Cancel condition
Vehicle is stopped, or parking brake
OFF signal is detected.
DOOR OPEN
Door
Detection condition
Vehicle is running [approx. 5 km/h (3
MPH) or faster] and door ajar of any of
the doors is detected.
Door is open
Cancel condition
Vehicle is stopped and all the doors
lock.
ANTI-LOCK BRAKE
ABS
Detection condition
Warning lamp ON signal is detected
when engine is running.
ABS control system
malfunction
Cancel condition
Warning lamp OFF signal is detected.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст