Infiniti F50. Manual — part 98
TROUBLE DIAGNOSIS FOR SYMPTOMS
AT-277
D
E
F
G
H
I
J
K
L
M
A
B
AT
A/T Does Not Shift: 2nd gear
→
1st gear
ECS0089R
SYMPTOM:
When shifted from 2M to 1M position in manual mode, does not downshift from 2nd to 1st gear.
DIAGNOSTIC PROCEDURE
1.
CHECK SELF-DIAGNOSTIC RESULTS
Execute self-diagnosis.
Do the self-diagnostic results indicate PNP switch, ATF pressure switch 5?
YES
>> Check the malfunctioning system. Refer to
AT-105, "DTC P0705 PARK/NEUTRAL POSITION
AT-227, "DTC P1845 ATF PRESSURE SWITCH 5"
NO
>> GO TO 2.
2.
CHECK A/T FLUID LEVEL
Check A/T fluid level again. Refer to
OK or NG
OK
>> GO TO 3.
NG
>> Refill ATF.
3.
CHECK CONTROL LINKAGE
Check the control linkage.
●
Refer to
AT-282, "Checking of A/T Position"
OK or NG
OK
>> GO TO 4.
NG
>> Adjust control linkage. Refer to
4.
MANUAL MODE SWITCH
Check the manual mode switch. Refer to
AT-215, "DTC P1815 MANUAL MODE SWITCH"
.
OK or NG
OK
>> GO TO 5.
NG
>> Repair or replace damaged parts.
SAT638A
SCIA1612E
AT-278
TROUBLE DIAGNOSIS FOR SYMPTOMS
5.
CHECK A/T FLUID CONDITION
1.
Remove oil pan. Refer to
AT-289, "Control Valve Assembly"
2.
Check A/T fluid condition.
OK or NG
OK
>> GO TO 6.
NG
>> GO TO 9.
6.
DETECT MALFUNCTIONING ITEM
●
Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to
OK or NG
OK
>> GO TO 7.
NG
>> Repair or replace damaged parts.
7.
CHECK SYMPTOM
Check again.
OK or NG
OK
>> INSPECTION END
NG
>> GO TO 8.
8.
PERFORM TCM INSPECTION
1.
Perform TCM input/output signal inspection.
2.
If NG, recheck TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK
>> INSPECTION END
NG
>> Repair or replace damaged parts.
9.
DETECT MALFUNCTIONING ITEM
●
Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to
OK or NG
OK
>> GO TO 7.
NG
>> Repair or replace damaged parts.
SAT171B
TROUBLE DIAGNOSIS FOR SYMPTOMS
AT-279
D
E
F
G
H
I
J
K
L
M
A
B
AT
Vehicle Does Not Decelerate By Engine Brake
ECS0089S
SYMPTOM:
No engine brake is applied when the gear is shifted from the 2nd to 1st gear.
DIAGNOSTIC PROCEDURE
1.
CHECK SELF-DIAGNOSTIC RESULTS
Execute self-diagnosis.
Do the self-diagnostic results indicate PNP switch, ATF pressure switch 5?
YES
>> Check the malfunctioning system. Refer to
AT-105, "DTC P0705 PARK/NEUTRAL POSITION
AT-227, "DTC P1845 ATF PRESSURE SWITCH 5"
NO
>> GO TO 2.
2.
CHECK A/T FLUID LEVEL
Check A/T fluid level again. Refer to
OK or NG
OK
>> GO TO 3.
NG
>> Refill ATF.
3.
CHECK CONTROL LINKAGE
Check the control linkage.
●
Refer to
AT-282, "Checking of A/T Position"
OK or NG
OK
>> GO TO 4.
NG
>> Adjust control linkage. Refer to
4.
MANUAL MODE SWITCH
Check the manual mode switch. Refer to
AT-215, "DTC P1815 MANUAL MODE SWITCH"
.
OK or NG
OK
>> GO TO 5.
NG
>> Repair or replace damaged parts.
SAT638A
SCIA1612E
AT-280
TROUBLE DIAGNOSIS FOR SYMPTOMS
5.
CHECK A/T FLUID CONDITION
1.
Remove oil pan. Refer to
AT-289, "Control Valve Assembly"
2.
Check A/T fluid condition.
OK or NG
OK
>> GO TO 6.
NG
>> GO TO 9.
6.
DETECT MALFUNCTIONING ITEM
●
Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to
OK or NG
OK
>> GO TO 7.
NG
>> Repair or replace damaged parts.
7.
CHECK SYMPTOM
Check again.
OK or NG
OK
>> INSPECTION END
NG
>> GO TO 8.
8.
PERFORM TCM INSPECTION
1.
Perform TCM input/output signal inspection.
2.
If NG, recheck TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK
>> INSPECTION END
NG
>> Repair or replace damaged parts.
9.
DETECT MALFUNCTIONING ITEM
●
Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to
OK or NG
OK
>> GO TO 7.
NG
>> Repair or replace damaged parts.
SAT171B
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст