Infiniti QX56 (Z62). Manual — part 1395
WW-58
< REMOVAL AND INSTALLATION >
WASHER TANK
WASHER TANK
Exploded View
INFOID:0000000006220397
Removal and Installation
INFOID:0000000006220398
REMOVAL
1.
Fully open hood.
2.
Remove washer tank inlet fixing clip (A).
3.
Pull out washer tank inlet (1) from washer tank.
4.
Remove fender protector RH (front). Refer to
EXT-23, "FENDER PROTECTOR : Removal and Installa-
5.
Disconnect washer pump connector.
6.
Disconnect headlamp washer pump connector.
7.
Disconnect washer level switch connector.
8.
Disconnect front washer tube and rear washer tube.
9.
Disconnect headlamp washer tube joint.
10. Remove washer tank mounting bolts.
1.
Washer tank
2.
Washer tank inlet
: Vehicle front
Refer to
for the symbols in the figure.
JMLIA0932GB
: Vehicle front
JMLIA0933ZZ
WASHER TANK
WW-59
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
11. Pull washer tank (1) out of body panel bracket (2) to remove from the vehicle.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Add water up to the top of washer tank inlet after installing and check that there is no leakage.
JMLIA1130ZZ
WW-60
< REMOVAL AND INSTALLATION >
WASHER PUMP
WASHER PUMP
Exploded View
INFOID:0000000006220399
Removal and Installation
INFOID:0000000006220400
REMOVAL
1.
Remove washer tank. Refer to
WW-58, "Removal and Installation"
2.
Remove washer pump from washer tank.
3.
Remove packing from washer tank.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
• Check that there is no leakage after installation or replace packing with new part if it has been dam-
age.
• Never twist the packing when installing the washer pump.
1.
Washer tank
2.
Bracket
3.
Rear washer tube
4.
Front washer tube
5.
Washer pump harness connector
6.
Washer pump
7.
Packing
: Pawl
: Vehicle front
JMLIA0934ZZ
HEADLAMP WASHER PUMP
WW-61
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
HEADLAMP WASHER PUMP
Exploded View
INFOID:0000000006220401
Removal and Installation
INFOID:0000000006220402
REMOVAL
1.
Remove washer tank. Refer to
WW-58, "Removal and Installation"
2.
Remove the mounting bolt, and then remove headlamp washer pump from the washer tank.
3.
Remove the packing from the washer tank.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
• Check that there is no leakage after installation or replace packing with new part if it has been dam-
age.
• Never twist the packing when installing the headlamp washer pump.
1.
Washer tank
2.
Headlamp washer tube
3.
Headlamp washer pump harness
connector
4.
Headlamp washer pump
5.
Packing
: Vehicle front
JMLIA0935ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст