Infiniti QX56 (Z62). Manual — part 1099
HYDRAULIC BODY-MOTION CONTROL SYSTEM
SCS-33
< REMOVAL AND INSTALLATION >
[HBMC]
C
D
F
G
H
I
J
K
L
M
A
B
SCS
N
O
P
2.
Disconnect lower side pipe (A) of front shock absorber LH.
3.
Disconnect pipe (A) of accumulator assembly LH from left side
3-way (B).
4.
Disconnect upper side pipe (A) of front shock absorber RH.
5.
Remove protector A with power tool.
6.
Remove mounting bolts of left side 3-way.
7.
Remove protector B with power tool.
8.
Remove mounting bolts of each bracket.
9.
Remove front tube assembly A from the vehicle.
10. Perform inspection after removal. Refer to
Front Tube Assembly B (from Front Shock Absorber LH Upper to Front Shock Absorber RH Lower)
1.
Reduce system pressure. Refer to
2.
Disconnect upper side pipe (B) of front shock absorber LH.
B
: Upper side pipe
JSEIA0233ZZ
JSEIA0195ZZ
B
: Lower side pipe
JSEIA0234ZZ
A
: Lower side pipe
JSEIA0233ZZ
SCS-34
< REMOVAL AND INSTALLATION >
[HBMC]
HYDRAULIC BODY-MOTION CONTROL SYSTEM
3.
Disconnect pipe (A) of accumulator assembly RH from right side
3-way (B).
4.
Disconnect lower side pipe (B) of front shock absorber RH.
5.
Remove protector A with power tool.
6.
Remove mounting bolts of right side 3-way.
7.
Remove protector B with power tool.
8.
Remove mounting bolts of each bracket.
9.
Remove front tube assembly B from the vehicle.
10. Perform inspection after removal. Refer to
INSTALLATION
Note the following, and install in the reverse order of removal.
• Apply genuine NISSAN hydraulic suspension fluid to O-ring.
• Check connection portion of each piping for dirt or dust.
• Completely insert guide (A) to guide hole on frame when installing
left side 3-way.
• For tightening torque for pipe of accumulator assembly LH, refer to
SCS-35, "ACCUMULATOR : Exploded View"
.
• For tightening torque for pipe of accumulator assembly RH, refer to
SCS-35, "ACCUMULATOR : Exploded View"
.
FRONT TUBE ASSEMBLY : Inspection
INFOID:0000000006256023
INSPECTION AFTER REMOVAL
• O-ring must be free of scratches and damage.
• Pipe and tube must be free of scratches and damage.
INSPECTION AFTER INSTALLATION
Check oil leakage, twists, deformation, contact with other parts, and loose connections.
ADJUSTMENT AFTER INSTALLATION
Perform air bleeding. Refer to
ACCUMULATOR
JSEIA0197ZZ
A
: Upper side pipe
JSEIA0234ZZ
JSEIA0198ZZ
HYDRAULIC BODY-MOTION CONTROL SYSTEM
SCS-35
< REMOVAL AND INSTALLATION >
[HBMC]
C
D
F
G
H
I
J
K
L
M
A
B
SCS
N
O
P
ACCUMULATOR : Exploded View
INFOID:0000000006256024
ACCUMULATOR : Removal and Installation
INFOID:0000000006256025
REMOVAL
Accumulator Assembly LH
WARNING:
1.
O-ring
2.
Accumulator assembly RH
3.
Accumulator assembly LH
: Vehicle front
:
Apply genuine NISSAN hydraulic
suspension fluid
Refer to
for symbols not described on the above.
JSEIA0230GB
SCS-36
< REMOVAL AND INSTALLATION >
[HBMC]
HYDRAULIC BODY-MOTION CONTROL SYSTEM
Never remove mounting bolts of protector.
1.
Reduce system pressure. Refer to
2.
Disconnect pipe (A) of accumulator assembly LH from left side
3-way (B).
3.
Disconnect pipe (A) of accumulator assembly LH from left side
middle joint (B).
4.
Separate chassis and body. Refer to
.
5.
Remove mounting bolts of each bracket.
6.
Remove mounting bolts of accumulator assembly LH.
WARNING:
Never remove mounting bolts of protector.
7.
Remove accumulator assembly LH from the vehicle.
8.
Perform inspection after removal. Refer to
.
Accumulator Assembly RH
WARNING:
JSEIA0200GB
JSEIA0195ZZ
JSEIA0199ZZ
JSEIA0200GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст