Infiniti QX56 (Z62). Manual — part 929
MIR-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
DOOR MIRROR SYSTEM
DOOR MIRROR SYSTEM : System Diagram
INFOID:0000000006257222
DOOR MIRROR SYSTEM : System Description
INFOID:0000000006257223
MANUAL FUNCTION
Description
• Automatic drive positioner control unit controls door mirror.
• Automatic drive positioner control unit inputs changeover switch signal and perform the LH/RH control of
door mirror motor supplying electric power when changeover switch is operated.
• Automatic drive positioner control unit inputs mirror switch signal and supplies electric power to door mirror.
• The ignition switch signal (ACC/ON) is transmitted from BCM to driver seat control unit via CAN communica-
tion and from driver seat control unit to automatic drive positioner control unit via UART communication.
Operation Conditions
If the following conditions are not satisfied, operation is not performed.
• Ignition switch: ON or ACC
• Changeover switch: Select either left or right
REVERSE INTERLOCK DOOR MIRROR SYSTEM
Description
• Select either of the door mirror faces by changeover switch, and then set mirror face downward.
• When ignition switch is ON position and A/T shift selector is in R position, TCM sends the R signal to driver
seat control unit.
• The R signal is transmitted to automatic drive positioner control unit from driver seat control unit via UART
communication.
• When the R signal is detected, automatic drive positioner control unit activated mirror motor.
Operation Conditions
If the following conditions are not satisfied, operation is not performed.
• Ignition switch: ON
JMLIA0872GB
SYSTEM
MIR-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
• Changeover switch: Select either left or right
• A/T shift selector: R position
NOTE:
During the reverse interlock door mirror system, if all of the above conditions are not satisfied, mirror face
returns to original angle.
AUTO ANTI-DAZZLING INSIDE MIRROR SYSTEM
AUTO ANTI-DAZZLING INSIDE MIRROR SYSTEM : System Description
INFOID:0000000006257224
The sensor built in inside mirror detects the brightness of headlight of the vehicle behind and automatically
changes the light transmission to decrease the brightness.
MIR-10
< ECU DIAGNOSIS INFORMATION >
DRIVER SEAT CONTROL UNIT, AUTOMATIC DRIVE POSITIONER CONTROL
UNIT
ECU DIAGNOSIS INFORMATION
DRIVER SEAT CONTROL UNIT, AUTOMATIC DRIVE POSITIONER CON-
TROL UNIT
List of ECU Reference
INFOID:0000000006257225
ECU
Reference
DRIVER SEAT CONTROL UNIT
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
DOOR MIRROR SYSTEM
MIR-11
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
WIRING DIAGRAM
DOOR MIRROR SYSTEM
Wiring Diagram
INFOID:0000000006257226
JCLWM5426GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст