Infiniti QX56 (Z62). Manual — part 928
MIR-4
< PRECAUTION >
PRECAUTIONS
5.
When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn
the push-button ignition switch from ACC position to ON position, then to LOCK position. (The steering
wheel will lock when the push-button ignition switch is turned to LOCK position.)
6.
Perform self-diagnosis check of all control units using CONSULT-III.
PREPARATION
MIR-5
< PREPARATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000006257218
Tool name
Description
Remover tools
Removes the clips, pawls and metal clips
JMKIA3050ZZ
MIR-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
DOOR MIRROR
DOOR MIRROR : Component Parts Location
INFOID:0000000006257219
DOOR MIRROR : Component Description
INFOID:0000000006257220
1.
SYSTEM : Component Parts Loca-
tion"
2.
Door mirror (passenger side)
3.
SYSTEM : Component Parts Loca-
tion"
4.
Automatic drive positioner control
unit
Refer to
5.
Door mirror remote control switch
6.
Driver seat control unit
Refer to
7.
Door mirror (driver side)
JMLIA0871ZZ
Component parts
Description
Automatic drive positioner control unit
Door mirror is supplied with power after receiving the input of mirror
switch and changeover switch.
Door mirror remote control
switch
Mirror switch
It transmits mirror face adjust operation to automatic drive positioner
control unit.
Changeover switch
It transmits the LH/RH control of door mirror that supplies power to au-
tomatic drive positioner control unit.
Open/close switch
Power is supplied to folding mirror from door mirror remote control
switch when operating switch.
Door mirror
It makes mirror face operate from side to side and up and down via in-
tegrated motor.
COMPONENT PARTS
MIR-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
INSIDE MIRROR
INSIDE MIRROR : Component Description
INFOID:0000000006257221
BCM
The ignition switch signal (ACC/ON) is transmitted to driver seat control
unit via CAN communication.
Driver seat control unit
The ignition switch signal (ACC/ON) is transmitted to automatic drive
positioner control unit via UART communication.
TCM
The A/T shift position signal is transmitted to driver seat control unit via
CAN communication.
Component parts
Description
Component
Function
Auto anti-dazzling inside mirror
It automatically changes the light transmittance according to the brightness of the
light from the headlight of the vehicle behind.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст