Infiniti QX56 (Z62). Manual — part 370
DAS
WARNING SYSTEMS ON INDICATOR CIRCUIT
DAS-517
< DTC/CIRCUIT DIAGNOSIS >
[BSW]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
WARNING SYSTEMS ON INDICATOR CIRCUIT
Component Function Check
INFOID:0000000006223974
1.
CHECK WARNING SYSTEMS ON INDICATOR
1.
Turn the ignition switch ON.
2.
Select the active test item “WARNING SYSTEM IND” of “ICC/ADAS” with CONSULT-III.
3.
With operating the test item, check the operation.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
DAS-517, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000006223975
1.
CHECK WARNING ON INDICATOR POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect twin switch connector.
3.
Turn ignition switch ON.
4.
Check voltage between twin switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair the warning systems ON indicator power supply circuit.
2.
CHECK WARNING SYSTEMS ON INDICATOR SIGNAL FOR OPEN
1.
Turn ignition switch OFF.
2.
Disconnect the ADAS control unit harness connector.
3.
Check continuity between the ADAS control unit harness connector and twin switch harness connector.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair the harnesses or connectors.
3.
CHECK WARNING SYSTEMS ON INDICATOR SIGNAL CIRCUIT FOR SHORT
Check continuity between the ADAS control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
On
: Warning systems ON indicator illuminates
Off
: Warning systems ON indicator is turned OFF
Terminals
Voltage
(Approx.)
(+)
(
−
)
Twin switch
Ground
Connector
Terminal
M127
8
Battery voltage
ADAS control unit
Twin switch
Continuity
Connector
Terminal
Connector
Terminal
B61
4
M127
9
Existed
ADAS control unit
Ground
Continuity
Connector
Terminal
B61
4
Not existed
DAS-518
< DTC/CIRCUIT DIAGNOSIS >
[BSW]
WARNING SYSTEMS ON INDICATOR CIRCUIT
NO
>> Repair the harnesses or connectors.
4.
CHECK WARNING SYSTEMS ON INDICATOR
Check the warning systems ON indicator. Refer to
DAS-518, "Component Inspection"
Is the inspection result normal?
YES
>> Replace the ADAS control unit. Refer to
DAS-63, "Removal and Installation"
NO
>> Replace warning systems switch.
DAS-404, "Removal and Installation"
.
Component Inspection
INFOID:0000000006223976
1.
CHECK WARNING SYSTEMS ON INDICATOR
Apply battery voltage to warning systems switch terminals 8 and 9, and then check if the warning systems ON
indicator illuminates.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace the warning systems switch. Refer to
DAS-404, "Removal and Installation"
Terminals
Condition
Driver warning
systems ON in-
dicator
(+)
(-)
8
9
When the battery voltage is applied
On
When the battery voltage is not applied
Off
DAS
WARNING BUZZER CIRCUIT
DAS-519
< DTC/CIRCUIT DIAGNOSIS >
[BSW]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
WARNING BUZZER CIRCUIT
Component Function Check
INFOID:0000000006223977
1.
CHECK WARNING BUZZER
1.
Turn the ignition switch ON.
2.
Select the active test item “LDP BUZZER” of “ICC/ADAS” with CONSULT-III.
3.
With operating the test item, check the operation.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
DAS-393, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000006223978
1.
CHECK WARNING BUZZER POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect the warning buzzer connector.
3.
Turn ignition switch ON.
4.
Check voltage between the warning buzzer harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair the warning buzzer power supply circuit.
2.
CHECK WARNING BUZZER GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Check continuity between the warning buzzer harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair the harnesses or connectors.
3.
CHECK WARNING BUZZER SIGNAL CIRCUIT FOR OPEN
1.
Disconnect the ADAS control unit connector.
2.
Check continuity between the ADAS control unit harness connector and warning buzzer harness connec-
tor.
Is the inspection result normal?
On
: Warning buzzer is activated.
Off
: Warning buzzer is not activated.
Terminals
Voltage
(Approx.)
(+)
(
−
)
Warning buzzer
Ground
Connector
Terminal
M94
1
Battery voltage
Warning buzzer
Ground
Continuity
Connector
Terminal
M94
3
Existed
ADAS control unit
Warning buzzer
Continuity
Connector
Terminal
Connector
Terminal
B61
12
M94
2
Existed
DAS-520
< DTC/CIRCUIT DIAGNOSIS >
[BSW]
WARNING BUZZER CIRCUIT
YES
>> GO TO 4.
NO
>> Repair the harnesses or connectors.
4.
CHECK WARNING BUZZER SIGNAL CIRCUIT FOR SHORT
Check continuity between the ADAS control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair the harnesses or connectors.
5.
CHECK WARNING BUZZER OPERATION
1.
Connect the warning buzzer connector.
2.
Turn ignition switch ON.
3.
Apply ground to warning buzzer terminal 2.
4.
Check condition of the warning buzzer.
Does warning buzzer sound?
YES
>> Replace the ADAS control unit.
NO
>> Replace the warning buzzer.
ADAS control unit
Ground
Continuity
Connector
Terminal
M61
12
Not existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст