Infiniti QX56 (Z62). Manual — part 838
INL-82
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000006288670
Item
Type
Wattage (W)
Push-button ignition switch illumination
LED
—
Map lamp
Wedge
8
Console lamp
(integrated into the map lamp assembly)
LED
—
Puddle lamp
LED
—
Vanity mirror lamp
—
2
Glove box lamp
Wedge
1.4
Foot lamp (driver and passenger)
Wedge
1.4
Rear foot lamp
LED
—
Mood lamp (front and rear door armrest)
LED
—
Step lamp
Wedge
8
Personal lamp
Wedge
8
Luggage room lamp
—
8
INT-1
BODY INTERIOR
C
D
E
F
G
H
I
K
L
M
SECTION
INT
A
B
INT
N
O
P
CONTENTS
INTERIOR
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precaution Necessary for Steering Wheel Rota-
tion after Battery Disconnect . . . . . . . . .....
Precaution for Procedure without Cowl Top Cover
. ..
Precaution for Work . . . . . . . . . . . . ..
PREPARATION . . . . . . . . . . .
PREPARATION . . . . . . . . . . . . ...
Special Service Tools . . . . . . . . . . . ....
Commercial Service Tools . . . . . . . . . ....
CLIP LIST . . . . . . . . . . . . . . .
Clip List . . . . . . . . . . . . . . . . .....
SYMPTOM DIAGNOSIS . . . . . . . ...
SQUEAK AND RATTLE TROUBLE DIAG-
NOSES . . . . . . . . . . . . . . . .
Work Flow . . . . . . . . . . . . . . . .....
Inspection Procedure . . . . . . . . . . . ....
Diagnostic Worksheet . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . ...
FRONT DOOR FINISHER . . . . . . . . ..
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
REAR DOOR FINISHER . . . . . . . . .
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
BODY SIDE TRIM . . . . . . . . . . . ..
Exploded View . . . . . . . . . . . . . .
DASH SIDE FINISHER . . . . . . . . . . . ..
DASH SIDE FINISHER : Removal and Installation
.
FRONT PILLAR GARNISH . . . . . . . . . .
FRONT PILLAR GARNISH : Removal and Instal-
lation . . . . . . . . . . . . . . . . . .
BODY SIDE WELT . . . . . . . . . . . . . .
BODY SIDE WELT : Removal and Installation . .
KICKING PLATE INNER . . . . . . . . . . ...
KICKING PLATE INNER : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . ...
KICKING PLATE OUTER . . . . . . . . . . ..
KICKING PLATE OUTER : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . ...
CENTER PILLAR LOWER GARNISH . . . . . ...
CENTER PILLAR LOWER GARNISH : Removal
and Installation . . . . . . . . . . . . . .
CENTER PILLAR UPPER GARNISH . . . . . .
CENTER PILLAR UPPER GARNISH : Removal
and Installation . . . . . . . . . . . . . .
FLOOR TRIM . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . .
FRONT FLOOR CARPET . . . . . . . . . . ..
FRONT FLOOR CARPET : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . ...
REAR FLOOR CARPET . . . . . . . . . . .
REAR FLOOR CARPET : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . ...
HEADLINING . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
LUGGAGE FLOOR TRIM . . . . . . . . .
INT-2
LUGGAGE FLOOR REAR BOARD . . . . . . ..
LUGGAGE FLOOR REAR BOARD : Removal and
Installation . . . . . . . . . . . . . . . ..
LUGGAGE REAR PLATE . . . . . . . . . . .
LUGGAGE REAR PLATE : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . ..
LUGGAGE SIDE LOWER FINISHER . . . . . ...
LUGGAGE SIDE LOWER FINISHER : Removal
and Installation . . . . . . . . . . . . . ...
REAR PILLAR FINISHER . . . . . . . . . . .
REAR PILLAR FINISHER : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . ..
BACK PILLAR GARNISH . . . . . . . . . . .
BACK PILLAR GARNISH : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . ..
LUGGAGE SIDE UPPER FINISHER . . . . . .
LUGGAGE SIDE UPPER FINISHER : Removal
and Installation . . . . . . . . . . . . . .
BACK DOOR TRIM . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . .
PRECAUTIONS
INT-3
< PRECAUTION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000006415653
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SRS AIR BAG”.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s)
with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
INFOID:0000000006415652
NOTE:
• Before removing and installing any control units, first turn the push-button ignition switch to the LOCK posi-
tion, then disconnect both battery cables.
• After finishing work, confirm that all control unit connectors are connected properly, then re-connect both
battery cables.
• Always use CONSULT-III to perform self-diagnosis as a part of each function inspection after finishing work.
If a DTC is detected, perform trouble diagnosis according to self-diagnosis results.
For vehicle with steering lock unit, if the battery is disconnected or discharged, the steering wheel will lock and
cannot be turned.
If turning the steering wheel is required with the battery disconnected or discharged, follow the operation pro-
cedure below before starting the repair operation.
OPERATION PROCEDURE
1.
Connect both battery cables.
NOTE:
Supply power using jumper cables if battery is discharged.
2.
Turn the push-button ignition switch to ACC position.
(At this time, the steering lock will be released.)
3.
Disconnect both battery cables. The steering lock will remain released with both battery cables discon-
nected and the steering wheel can be turned.
4.
Perform the necessary repair operation.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст