Infiniti QX56 (Z62). Manual — part 837
INL-78
< REMOVAL AND INSTALLATION >
PERSONAL LAMP
2.
Press the pawls (B) on both sides as shown in the figure using a
small flat-bladed screwdriver (A), and then pull out personal
lamp case (2) from personal lamp finisher (1).
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000006288664
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
PERSONAL LAMP BULB
1.
Insert any appropriate tool into the gap between the lens, and then remove the lens.
2.
Remove the bulb.
JMLIA1058ZZ
PUDDLE LAMP
INL-79
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PUDDLE LAMP
Exploded View
INFOID:0000000006288665
Removal and Installation
INFOID:0000000006288666
CAUTION:
• Disconnect the battery cable from negative terminal or remove the fuse.
• Never touch puddle lamp directly by hand. Keep grease and other oily substaces away from it.
• Never touch puddle lamp by hand while it is lit or right after it is off.
• It is prohibited to disassemble puddle lamp.
• Always replace puddle lamp as an assembly, when replacing.
REMOVAL
1.
Remove door mirror assembly. Refer to
MIR-32, "DOOR MIRROR ASSEMBLY : Removal and Installa-
2.
Disconnect puddle lamp harness connector terminal from door mirror harness connector.
3.
Disengage base cover fixing pawls using a small flat-bladed
screwdriver (A), and then remove base cover.
CAUTION:
• Apply protective tape (B) around the base to protect the
surface from damage.
• Apply protective tape to small flat-bladed screwdriver.
1.
Door mirror assembly
2.
Puddle lamp
3.
Base cover
: Pawl
JMLIA1148ZZ
: Pawl
JMLIA0922ZZ
INL-80
< REMOVAL AND INSTALLATION >
PUDDLE LAMP
4.
Disengage puddle lamp fixing pawls, and then remove puddle
lamp (1) from base cover (2).
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMLIA1283ZZ
LUGGAGE ROOM LAMP
INL-81
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
LUGGAGE ROOM LAMP
Exploded View
INFOID:0000000006288667
Removal and Installation
INFOID:0000000006288668
CAUTION:
• Disconnect the battery cable from negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily substaces away from it.
Never touch bulb by hand while it is lit or right after it is off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with a new one.
REMOVAL
1.
Insert any appropriate tool into the gap between lens and roof garnish, and then remove lens.
2.
Disengage luggage room lamp housing fixing metal clips, and then disconnect luggage room lamp har-
ness connector.
3.
Remove luggage room lamp housing.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000006288669
CAUTION:
• Disconnect the battery cable from negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily substaces away from it.
Never touch bulb by hand while it is lit or right after it is off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with a new one.
LUGGAGE ROOM LAMP BULB
1.
Insert any appropriate tool into the gap between lens and roof garnish, and then remove the lens.
2.
Remove bulb.
1.
Lens
2.
Bulb
3.
Luggage room lamp housing
4.
Roof garnish
: Pawl
: Vehicle front
JMLIA1056ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст