Infiniti EX35. Manual — part 200
AV
REAR CAMERA IMAGE SIGNAL CIRCUIT
AV-581
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
REAR CAMERA IMAGE SIGNAL CIRCUIT
Description
INFOID:0000000003513837
• Around view monitor control unit supplies to the front camera, rear camera and side camera. And then it
superimpose the images from each camera and outputs then to the display unit.
• Superimpose the guiding lines, predicted course line and sonar indicator to the camera image that outputs to
the display unit.
• Around view monitor control unit performs the reception/transmission of communication signal with each
camera.
Diagnosis Procedure
INFOID:0000000003455038
1.
CHECK CONTINUITY REAR CAMERA POWER SUPPLY AND GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect around view monitor control unit connector and rear camera connector.
3.
Check continuity between around view monitor control unit harness connector terminals 36, 38 and rear
camera harness connector terminals 8, 7.
4.
Check continuity between around view monitor control unit harness connector and ground.
Is inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK VOLTAGE REAR CAMERA POWER SUPPLY
1.
Connect around view monitor control unit connector and rear camera connector.
2.
Turn ignition switch ON.
3.
Check voltage between around view monitor control unit harness connector and ground.
Is inspection result normal?
YES
>> GO TO 3.
NO
>> Replace around view monitor control unit.
3.
CHECK CONTINUITY REAR CAMERA IMAGE SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect around view monitor control unit connector and rear camera connector.
3.
Check continuity between around view monitor control unit harness connector and rear camera harness
connector.
Around view monitor control
unit
Rear camera
Continuity
Connector
Terminals
Connector
Terminals
B46
36
D111
8
Existed
38
7
Around view monitor control
unit
Ground
Continuity
Connector
Terminal
B46
36
Not existed
(+)
(
−
)
Condition
Voltage
(Approx.)
Around view monitor control
unit
Connector
Terminal
B46
36
Ground
“CAMERA” switch is ON or
shift position is “R”.
6.0 V
AV-582
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
REAR CAMERA IMAGE SIGNAL CIRCUIT
4.
Check continuity between around view monitor control unit harness connector and ground.
Is inspection result normal?
YES
>> GO TO 4.
NO
>> Repair harness or connector.
4.
CHECK REAR CAMERA IMAGE SIGNAL
1.
Connect around view monitor control unit connector and rear camera connector.
2.
Turn ignition switch ON.
3.
Check signal between around view monitor control unit harness connector.
Is inspection result normal?
YES
>> Replace around view monitor control unit.
NO
>> Replace rear camera.
Around view monitor control
unit
Rear camera
Continuity
Connector
Terminals
Connector
Terminals
B46
39
D111
5
Existed
40
1
Around view monitor control
unit
Ground
Continuity
Connector
Terminals
B46
39, 40
Not existed
(+)
(
−
)
Condition
Reference value
Around view monitor control
unit
Around view monitor control
unit
Connector
Terminal
Connector
Terminal
B46
39
B46
40
“CAMERA” switch is ON or
shift position is “R”.
JSNIA0834GB
AV
SIDE CAMERA LH COMMUNICATION SIGNAL CIRCUIT
AV-583
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SIDE CAMERA LH COMMUNICATION SIGNAL CIRCUIT
Description
INFOID:0000000003513838
• Around view monitor control unit supplies to the front camera, rear camera and side camera. And then it
superimpose the images from each camera and outputs then to the display unit.
• Superimpose the guiding lines, predicted course line and sonar indicator to the camera image that outputs to
the display unit.
• Around view monitor control unit performs the reception/transmission of communication signal with each
camera.
Diagnosis Procedure
INFOID:0000000003455040
1.
CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect around view monitor control unit connector and door mirror (driver side) connector.
3.
Check continuity between around view monitor control unit harness connector and door mirror (driver
side) harness connector.
4.
Check continuity between around view monitor control unit harness connector and ground.
Is inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK COMMUNICATION SIGNAL
1.
Connect around view monitor control unit connector and door mirror (driver side) connector.
2.
Turn ignition switch ON.
3.
Check signal between around view monitor control unit harness connector and ground.
Is inspection result normal?
YES
>> Replace around view monitor control unit.
NO
>> Replace side camera LH.
Around view monitor control
unit
Door mirror
(driver side)
Continuity
Connector
Terminal
Connector
Terminal
B45
47
D3
3
Existed
Around view monitor control
unit
Ground
Continuity
Connector
Terminal
B45
47
Not existed
(+)
(
−
)
Reference value
Around view monitor control
unit
Connector
Terminal
B45
47
Ground
JSNIA0836GB
AV-584
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
SIDE CAMERA LH IMAGE SIGNAL CIRCUIT
SIDE CAMERA LH IMAGE SIGNAL CIRCUIT
Description
INFOID:0000000003513839
• Around view monitor control unit supplies to the front camera, rear camera and side camera. And then it
superimpose the images from each camera and outputs then to the display unit.
• Superimpose the guiding lines, predicted course line and sonar indicator to the camera image that outputs to
the display unit.
• Around view monitor control unit performs the reception/transmission of communication signal with each
camera.
Diagnosis Procedure
INFOID:0000000003455042
1.
CHECK CONTINUITY SIDE CAMERA LH POWER SUPPLY AND GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect around view monitor control unit connector and door mirror (driver side) connector.
3.
Check continuity between around view monitor control unit harness connector and door mirror (driver
side) harness connector.
4.
Check continuity between around view monitor control unit harness connector and ground.
Is inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK VOLTAGE SIDE CAMERA LH POWER SUPPLY
1.
Connect around view monitor control unit connector and door mirror (driver side) connector.
2.
Turn ignition switch ON.
3.
Check voltage between around view monitor control unit harness connector and ground.
Is inspection result normal?
YES
>> GO TO 3.
NO
>> Replace around view monitor control unit.
3.
CHECK CONTINUITY SIDE CAMERA LH IMAGE SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect around view monitor control unit connector and door mirror (driver side) connector.
3.
Check continuity between around view monitor control unit harness connector and door mirror (driver
side) harness connector.
Around view monitor control
unit
Door mirror (driver side)
Continuity
Connector
Terminals
Connector
Terminals
B45
48
D3
6
Existed
50
18
Around view monitor control
unit
Ground
Continuity
Connector
Terminal
B45
48
Not existed
(+)
(
−
)
Condition
Voltage
(Approx.)
Around view monitor control
unit
Connector
Terminal
B45
48
Ground
“CAMERA” switch is ON or
shift position is “R”.
6.0 V
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст