Infiniti EX35. Manual — part 8
ADP-26
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
OUTPUT PARTS
MEMORY FUNCTION
MEMORY FUNCTION : System Diagram
INFOID:0000000003134627
MEMORY FUNCTION : System Description
INFOID:0000000003134628
OUTLINE
The driver seat control unit can store the optimum driving positions (seat, steering column and door mirror
position) for 2 people. If the front seat position is changed, one-touch (pressing desired memory switch for
more than 0.5 second) operation allows changing to the other driving position.
NOTE:
Further information for the memory storage procedure. Refer to
ADP-10, "MEMORY STORING : Description"
OPERATION PROCEDURE
1.
Turn ignition switch ON
2.
Press desired memory switch for more than 0.5 second.
3.
Driver seat, steering and door mirror will move to the memorized position.
OPERATION CONDITION
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Item
Function
Door mirror motor
(driver side/passenger side)
Move the outside mirror face upward/downward and leftward/rightward.
Tilt & telescopic motor
Move the steering column upward/downward and frontward/rearward.
Lifting motor (rear)
Move the seat lifter (rear) upward/downward.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat frontward/rearward.
JMJIA0163GB
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-27
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
Satisfy all of the following items. The memory function is not performed if these items are not satisfied.
However, the memory operation can be performed for 45 seconds after opening the driver door (driver door switch OFF
→
ON) even if
the IGN position is in OFF position.
DETAIL FLOW
Item
Request status
Ignition position
ON
Switch inputs
• Power seat switch
• Tilt & telescopic switch
• Door mirror control switch
• Set switch
• Memory switch
OFF
(Not operated)
A/T selector lever
P position
Order
Input
Output
Control unit condition
1
Memory switch
—
The memory switch signal is inputted to the automatic drive positioner
control unit when memory switch 1 or 2 is operated.
Memory switch signal is input to driver seat control unit via UART
communication.
2
—
Motors
(Seat, Steering,
door mirror)
Driver seat control unit operates each motor of seat when it recogniz-
es the memory switch pressed for 0.5 second or more and requests
each motor operation to automatic drive positioner control unit via
UART communication. The automatic drive positioner control unit op-
erates each motor.
Memory switch Indica-
tor
Driver seat control unit requests the flashing of memory indicator to
automatic drive positioner control unit via UART communication while
either of the motors is operating. The automatic drive positioner con-
trol unit illuminates the memory indicator.
3
Sensors
(Seat, steering col-
umn, door mirror)
—
Driver seat control unit judges the operating seat position with each
seat sensor input. The positions of the steering column and outside
mirror are monitored with each sensor signal that is input from auto
drive positioner control unit via UART communication. Driver seat
control unit stops the operation of each motor when each part reach-
es the recorded address.
4
—
Memory switch Indica-
tor
Driver seat control unit requests the illumination of memory indicator
to auto drive positioner control unit via UART communication after all
motors stop. The auto driving positioner control unit illuminates the
memory indicator for 5 seconds.
ADP-28
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
MEMORY FUNCTION : Component Parts Location
INFOID:0000000003586968
1.
BCM M118, M119, M122, M123
2.
Automatic drive positioner control unit
M51, M52
3.
Tilt motor M49
4.
Telescopic motor M49
5.
Unified meter and A/C amp. M67
6.
AV control unit
With NAVI M87, M88
Without NAVI M83, M85
7.
AT assembly connector F51
8.
Tilt & telescopic switch M31
9.
Key slot M22
10. Tilt sensor M48
11.
Telescopic sensor M48
12. Seat memory switch D5
13. Door mirror remote control switch
D17
A.
Dash side lower (Passenger side)
B.
View with instrument driver lower
panel removed
C.
View with steering column cover low-
er and upper removed
D.
Behind cluster lid C
E.
A/T assembly
(TCM is built in A/T assembly)
F.
View with instrument driver lower
panel removed
G
View with steering column cover low-
er and upper removed
JMJIA1472ZZ
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-29
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MEMORY FUNCTION : Component Description
INFOID:0000000003134630
CONTROL UNITS
INPUT PARTS
Switches
Sensors
14. Front door switch (driver side) B16
15. Control device (detention switch)
M137
16. Sliding, lifting switch
(Power seat switch B459)
17. Reclining switch (power seat switch
B459)
18. Door mirror (driver side) D3
19. Reclining motor B454
20. Driver seat control unit B451, B452
21. Lifting motor (front) B455
22. Lifting motor (rear) B456
23. Sliding motor B461
24. Sliding sensor B453
H.
View with center console assembly
removed
I.
View with seat cushion pad and seat-
back pad removed
J.
Backside of the seat cushion
JMJIA1473ZZ
Item
Function
Driver seat control unit
• The address of each part is recorded.
• Operates each motor of seat to the registered position.
• Requests the operations of steering column and door mirror to automatic drive
positioner control unit
Automatic drive positioner control unit
Operates the steering column and door mirror with the instructions from the driver
seat control.
Item
Function
Memory switch 1/2
The registration and memory function can be performed with its operation.
Item
Function
Door mirror sensor
(driver side/passenger side)
Detect the up/down and left/right position of outside mirror face.
Tilt & telescopic sensor
Detect the up/down and left/right position of steering column.
Lifting sensor (front)
Detect the up/down position of seat lifting (front).
Lifting sensor (rear)
Detect the up/down position of seat lifting (rear).
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст