Infiniti EX35. Manual — part 6
ADP-18
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
MANUAL FUNCTION : System Diagram
INFOID:0000000003134619
MANUAL FUNCTION : System Description
INFOID:0000000003134620
OUTLINE
The driving position (seat, steering column and door mirror position) can be adjusted manually with power seat
switch, tilt & telescopic switch and door mirror remote control switch.
OPERATION PROCEDURE
1.
Turn ignition switch ON.
2.
Operate power seat switch, tilt & telescopic switch or door mirror remote control switch.
3.
The driver seat, steering column or door mirror operates according to the operation of each switch.
DETAIL FLOW
Seat
Tilt & Telescopic
JMJIA0114GB
Order
Input
Output
Control unit condition
1
Power seat switch
(sliding, lifting, reclin-
ing)
—
The power seat switch signal is inputted to the driver seat control
unit when the power seat switch is operated.
2
—
Motors
(sliding, lifting, reclin-
ing)
The driver seat control unit outputs signals to each motor accord-
ing to the power seat switch input signal.
Order
Input
Output
Control unit condition
1
Tilt & telescopic switch
—
The tilt & telescopic switch signal is inputted to the automatic
drive positioner control unit when the tilt & telescopic switch is op-
erated.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-19
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
*: Tilt does not operates upward when tilt sensor volume is less than 1.2 V, tilt does not operate downward when the sensor value is big-
ger than 3.4 V. Telescopic does not operates backward when telescopic sensor value is less than 0.8 V, telescopic does not operate for-
ward when the sensor value is bigger than 3.4 V.
Door Mirror
NOTE:
The door mirrors can be operated manually when ignition switch is in either ACC or ON position. The ignition
switch signal (ACC/ON) is transmitted from BCM to the driver seat control unit via CAN communication and
from the driver seat control unit to the automatic drive positioner control unit via UART communication.
2
—
Motors
(Tilt, telescopic)
The automatic drive positioner control unit actuates each motor
according to the operation of the tilt & telescopic switch.
3
Sensors
(Tilt, telescopic)
—
The automatic drive positioner control unit recognizes any oper-
ation limit of each actuator via each sensor and will not operate
the actuator anymore at that time.*
Order
Input
Output
Control unit condition
Order
Input
Output
Control unit condition
1
Door mirror remote
control switch
—
The door mirror remote control switch signal is inputted to the au-
tomatic drive positioner control unit when the door mirror remote
control switch is operated.
2
—
Motors
(Door mirror motor)
The automatic drive positioner control unit actuates each motor
according to the operation of the door mirror remote control switch.
ADP-20
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
MANUAL FUNCTION : Component Parts Location
INFOID:0000000003586963
1.
BCM M118, M119, M122, M123
2.
Automatic drive positioner control unit
M51, M52
3.
Tilt motor M49
4.
Telescopic motor M49
5.
Unified meter and A/C amp. M67
6.
AV control unit
With NAVI M87, M88
Without NAVI M83, M85
7.
AT assembly connector F51
8.
Tilt & telescopic switch M31
9.
Key slot M22
10. Tilt sensor M48
11.
Telescopic sensor M48
12. Seat memory switch D5
13. Door mirror remote control switch
D17
A.
Dash side lower (Passenger side)
B.
View with instrument driver lower
panel removed
C.
View with steering column cover low-
er and upper removed
D.
Behind cluster lid C
E.
A/T assembly
(TCM is built in A/T assembly)
F.
View with instrument driver lower
panel removed
G
View with steering column cover low-
er and upper removed
JMJIA1472ZZ
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-21
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MANUAL FUNCTION : Component Description
INFOID:0000000003134622
CONTROL UNITS
INPUT PARTS
Switches
14. Front door switch (driver side) B16
15. Control device (detention switch)
M137
16. Sliding, lifting switch
(Power seat switch B459)
17. Reclining switch (power seat switch
B459)
18. Door mirror (driver side) D3
19. Reclining motor B454
20. Driver seat control unit B451, B452
21. Lifting motor (front) B455
22. Lifting motor (rear) B456
23. Sliding motor B461
24. Sliding sensor B453
H.
View with center console assembly
removed
I.
View with seat cushion pad and seat-
back pad removed
J.
Backside of the seat cushion
JMJIA1473ZZ
Item
Function
Driver seat control unit
• Operates the specific seat motor with the signal from the power seat switch.
• Transmits the ignition switch signal (ACC/ON) via UART communication to the
automatic drive positioner control unit.
Automatic drive positioner control unit
Operates the specific motor with the signal from tilt & telescopic switch or door mir-
ror remote control switch.
BCM
Recognizes the following status and transmits it to the driver seat control unit via
CAN communication.
• Ignition position: ACC/ON
Item
Function
Power seat switch
The following switch is installed.
• Reclining switch
• Lifting switch (front)
• Lifting switch (rear)
• Sliding switch
The specific parts can be operated with the operation of each switch.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст