Infiniti EX35. Manual — part 1305
SEC-116
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
HEADLAMP
HEADLAMP
Description
INFOID:0000000003586635
Headlamp lighting when vehicle security system is alarm phase.
Component Function Check
INFOID:0000000003586636
1.
CHECK HEADLAMP OPERATION
Check if headlamp operate by lighting switch.
Does headlamp come on when turning switch “ON”?
YES
>> Headlamp circuit is OK.
NO
>> Go to
SEC-116, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000003586637
1.
CHECK HEADLAMP OPERATION
SEC-116, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> repair or replace the malfunctioning parts.
2.
CHECK INTERMITTENT INCIDENT
GI-38, "Intermittent Incident"
>> INSPECTION END
VEHICLE SECURITY INDICATOR
SEC-117
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
VEHICLE SECURITY INDICATOR
Description
INFOID:0000000003586638
• Vehicle security indicator is built in combination meter.
• IVIS (Infinity Vehicle Immobilizer System-NATS) and vehicle security system conditions are indicated by
blink or illumination of vehicle security indicator.
Component Function Check
INFOID:0000000003586639
1.
CHECK FUNCTION
1.
Perform “THEFT IND” in the “ACTIVE TEST” mode with CONSULT-III.
2.
Check vehicle security indicator operation.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Go to
SEC-117, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000003586640
1.
CHECK DTC WITH “UNIFIED METER AND A/C AMP.”
Perform “Self Diagnostic Result” for unified meter and A/C amp. Refer to
Is the inspection result is normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK INTERMITTENT INCIDENT
GI-38, "Intermittent Incident"
.
>> INSPECTION END
Test item
Description
THEFT IND
ON
Vehicle security indicator
Illuminate
OFF
Not illuminate
SEC-118
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
KEY WARNING LAMP
KEY WARNING LAMP
Description
INFOID:0000000003739086
Performs operation method guide and warning together with buzzer.
Component Function Check
INFOID:0000000003739087
1.
CHECK FUNCTION
Check the operation with “INDICATOR” in “Active Test” mode with CONSULT-III.
Is the inspection result normal?
YES
>> Key warning lamp in combination meter is OK.
NO
>> Refer to
SEC-118, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000003739088
1.
CHECK KEY WARNING LAMP
MWI-38, "Diagnosis Description"
.
Is the inspection result normal?
Yes
>> GO TO 2.
No
>> Repair or replace harness.
2.
CHECK INTERMITTENT INCIDENT
GI-38, "Intermittent Incident"
>> INSPECTION END
Test item
Condition
INDICATOR
RED ON
Key warning lamp (red) illuminates
RED IND
Key warning lamp (red) flashes
INTELLIGENT KEY SYSTEM/ENGINE START FUNCTION
SEC-119
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
INTELLIGENT KEY SYSTEM/ENGINE START FUNCTION
Wiring Diagram - INTELLIGENT KEY SYSTEM/ENGINE START FUNCTION -
INFOID:0000000003129596
JCKWM1071GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст