Infiniti EX35. Manual — part 1341
FRONT PASSENGER AIR BAG MODULE
SR-9
< ON-VEHICLE REPAIR >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
• Always place front passenger air bag module with pad side
facing upward.
• Do not insert any foreign objects (screwdriver, etc.) into front passenger air bag module.
• Do not disassemble front passenger air bag module.
• Do not expose the front passenger air bag module to temperatures exceeding 90
°
C (194
°
F).
• Do not allow oil, grease or water to come in contact with the front passenger air bag module.
• Replace the front passenger air bag module if it has been
dropped or sustained an impact.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Do not use old fixing bolt after removal; replace with new bolt.
• In the case that a malfunction is detected by the air bag warning lamp, after reparation or replace-
ment of the malfunctioning parts, reset the memory by self-diagnosis or by the CONSULT-III.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
Refer to
SRC-14, "Diagnosis Description"
: Upward
JMHIA0546ZZ
JMHIA0009ZZ
SR-10
< ON-VEHICLE REPAIR >
SIDE CURTAIN AIR BAG MODULE
SIDE CURTAIN AIR BAG MODULE
Exploded View
INFOID:0000000003131588
Removal and Installation
INFOID:0000000003131589
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3
minutes.
• Do not use air tools or electric tools for servicing.
REMOVAL
1.
Remove the headlining. Refer to normal roof
INT-27, "NORMAL ROOF : Removal and Installation"
or sun-
INT-30, "SUNROOF : Removal and Installation"
2.
Remove the side curtain air bag harness connector.
NOTE:
• For installing/removing side curtain air bag harness connector,
insert thin screwdriver wrapped in tape into notch, lift lock and
remove connector.
• Install connector with lock raised, and push lock into connec-
tor.
• After installing the connector, check that the lock is pushed
securely into it.
3.
Remove fixing bolts, and then remove side curtain air bag module.
CAUTION:
• Do not insert any foreign objects (screwdriver, etc.) into side curtain air bag module.
• Do not disassemble side curtain air bag module.
• Do not expose the side curtain air bag module to temperatures exceeding 90
°
C (194
°
F).
• Do not allow oil, grease or water to come in contact with the side curtain air bag module.
1.
Side curtain air bag
2.
Strap
3.
Side curtain air bag inflator
A.
Side curtain air bag harness connec-
tor
B.
Ground bolt
Refer to
for symbols in the figure.
JMHIA0547GB
PHIA0953J
SIDE CURTAIN AIR BAG MODULE
SR-11
< ON-VEHICLE REPAIR >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
• Replace the side curtain air bag module if it has been dropped
or sustained an impact.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• In the case that a malfunction is detected by the air bag warning lamp, after reparation or replace-
ment of the malfunctioning parts, reset the memory by self-diagnosis or by the CONSULT-III.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
Refer to
SRC-14, "Diagnosis Description"
JMHIA0009ZZ
SR-12
< ON-VEHICLE REPAIR >
CRASH ZONE SENSOR
CRASH ZONE SENSOR
Exploded View
INFOID:0000000003131590
Removal and Installation
INFOID:0000000003131591
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3
minutes.
• Do not use air tools or electric tools for servicing.
REMOVAL
1.
Remove the reservoir tank. Refer to
CO-13, "Removal and Installation"
2.
Remove the crash zone sensor fixing nuts.
3.
Disconnect crash zone sensor harness connector.
CAUTION:
• Do not use old fixing nuts after removal; replace with new nuts.
• Replace the crash zone sensor if it has been dropped or sus-
tained an impact.
• Replace the crash zone sensor of deployed driver air bag and
deployed front passenger air bag.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
1.
Crash zone sensor
A.
Crash zone sensor harness connector
: Vehicle front
Refer to
for symbols in the figure
JMHIA0548GB
JMHIA0009ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст