Infiniti EX35. Manual — part 166
AV
MULTI AV SYSTEM
AV-445
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
WITH REAR VIEW MONITOR
NOTE:
• The name MULTIFUNCTION SWITCH indicates the integration of PRESET SWITCH and MULTIFUNCTION
SWITCH virtually.
• A radio antenna base integrated with radio antenna and satellite
radio antenna is adopted.
JSNIA0695GB
JSNIA1062GB
AV-446
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
MULTI AV SYSTEM
WITH AROUND VIEW MONITOR
NOTE:
• The name MULTIFUNCTION SWITCH indicates the integration of PRESET SWITCH and MULTIFUNCTION
SWITCH virtually.
• A radio antenna base integrated with radio antenna and satellite
radio antenna is adopted.
System Description
INFOID:0000000003515918
Multi AV system means that the following systems are integrated.
JSNIA0696GB
JSNIA1062GB
System name
System explanation
NAVIGATION SYSTEM
AUDIO SYSTEM
REAR VIEW MONITOR SYSTEM
VEHICLE INFORMATION SYSTEM
• Status of audio, climate control system, fuel economy, mainte-
nance and navigation are displayed.
• AV control unit displays the fuel consumption status while re-
ceiving data signal through CAN communication from ECM, uni-
fied meter and A/C amp.
• AV control unit is connected to BCM via CAN communication
transmitting/receiving for the vehicle settings function.
HANDS-FREE PHONE SYSTEM
Refer to the following “HANDS-FREE PHONE SYSTEM”.
AUXILIARY INPUT SYSTEM
Refer to the following “AUXILIARY INPUT SYSTEM”.
AV
MULTI AV SYSTEM
AV-447
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
• AV control unit function by transmitting/receiving data one by one with each unit (slave unit) that configures
them completely as a master unit by connecting between units that configure MULTI AV system with two AV
communication lines (H, L).
• Around view monitor control unit transmits/receives the data signal with sonar control unit and controls sonar
control unit. Around view monitor control unit transmits the information received from sonar control unit to AV
control unit. (With around view monitor)
• Two AV communication lines (H, L) adopt a twisted pair line that is resistant to noise.
• AV control unit is connected by CAN communication, and it receives data signals from ECM, unified meter
and A/C amp. It computes and displays fuel economy information value with the obtained information. The
transmitting/receiving of data signal is performed by BCM. In addition, it transmits the required signal of vehi-
cle setting and receives the response signal.
• AV control unit is connected with display and serial communication, and it transmits the required signal of
display and display control and receives the response signal from display. Also, it is connected with satellite
radio by serial communication, and it transmits the operating signal and receives the display signal.
NOTE:
AV control unit can perform CONSULT-III self-operating function and on board self-diagnosis.
• CONSULT-III self diagnosis: Refer to
AV-498, "CONSULT-III Function (MULTI AV)"
• On board self diagnosis: Refer to
AV-482, "Diagnosis Description"
HANDS-FREE PHONE SYSTEM
• Hands-free communication can be operated by connecting using Bluetooth
®
with cellular phone.
• Operation is performed by steering switch, and operating condition is indicated on display.
• Guide sound that is heard during operation is input from AV control unit to BOSE amp. and is output from
door speakers.
When a call is originated
Spoken voice sound output from the microphone (Mic. Signal) is input into AV control unit. AV control unit out-
puts to cellular phone with Bluetooth communication as a TEL voice signal. Voice sound is then heard by the
other party.
When receiving a call
Voice sound is input to one's own cellular phone from the other party. TEL voice signal is output to door speak-
ers, and the signal is input to BOSE amp. via AV control unit by establishing Bluetooth communication from
cellular phone.
AUXILIARY INPUT SYSTEM
• Image and sound can be output from an external device by connecting a device with auxiliary input jacks.
VOICE RECOGNITION SYSTEM
Refer to the following “VOICE RECOGNITION SYSTEM”.
TOUCH PANEL SYSTEM
Refer to the following “TOUCH PANEL SYSTEM”.
System name
System explanation
JPNIA0510GB
AV-448
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
MULTI AV SYSTEM
• Operation can be performed with multifunction switch and steering switch. Multifunction switch transmits
operation signal to AV control unit by AV communication.
VOICE RECOGNITION SYSTEM
• Each operation of multi AV system can be performed by inputting sound to microphone.
• Start of sound recognition system can be performed by steering switch.
TOUCH PANEL SYSTEM
Each operation of multi AV system can be performed by directly touching a display.
JSNIA0056GB
JSNIA0053GB
JSNIA0052GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст