Infiniti EX35. Manual — part 1274
REAR SEAT
SE-103
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
4.
Remove the hinge bracket mounting bolt (A), and then remove
the hinge bracket (1).
5.
Remove the seatback trim and pad.
• Remove the metal clips and pawls, and then pull out seatback
lock cover.
• Remove the seatback hinge outer cover.
• Remove the seatback hinge.
Remove the seatback hinge mounting bolt (A).
• Turn seatback lock knob counterclockwise to remove.
JMJIA1712ZZ
: Metal clip
: Pawl
JMJIA1503ZZ
JMJIA1504ZZ
JMJIA1537ZZ
SE-104
< ON-VEHICLE REPAIR >
REAR SEAT
• Push the seatback lock knob finisher pawl upward though the
seatback pad and the seatback frame to remove it.
• Remove the headrest holder.
CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
• Remove the seatback trim and pad.
• Remove the hog rings to separate the seatback trim and seatback pad.
6.
Remove the seatback lock assembly.
Remove the seatback lock assembly mounting bolts.
7.
Remove the rear center seat belt. Refer to
SB-10, "SEAT BELT RETRACTOR : Exploded View"
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seatback trim in position, and then securely connect the trim or trim cord with
the seatback frame.
SEAT CUSHION
Disassembly
Remove the hog rings to separate the trim and pad.
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord
with the seat cushion pad wire.
JMJIA0569ZZ
PIIB8351J
JMJIA1666ZZ
REAR SEAT BACK POWER RETURN CONTROL UNIT
SE-105
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
REAR SEAT BACK POWER RETURN CONTROL UNIT
Exploded View
INFOID:0000000003639925
Removal and Installation
INFOID:0000000003639926
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the luggage floor finisher assembly (front). Refer to
INT-35, "Removal and Installation"
2.
Remove mounting nuts (A).
3.
Remove rear seatback power return control unit (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clamp the harness to the right place.
1.
Rear seatback power return control unit
JMJIA1575ZZ
JMJIA1576ZZ
SE-106
< ON-VEHICLE REPAIR >
POWER SEAT SWITCH
POWER SEAT SWITCH
Exploded View
INFOID:0000000003639927
Removal and Installation
INFOID:0000000003639928
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the seat cushion outer finisher (1). Refer to
2.
Remove the screws (A).
3.
Remove the power seat switch (2) from the seat cushion outer
finisher.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clamp the harness to the right place.
JMJIA1451ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст