Infiniti EX35. Manual — part 1272
FRONT SEAT
SE-95
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
• Disconnect the reclining motor harness connector (A) and
lumbar support harness connector (B) (Driver's seat only).
• Disconnect the seatback heater harness connector (C).
• Remove the side air bag module harness (D).
4.
Remove the metal clips and pawls, and then pull out seat cush-
ion front finisher.
5.
Remove the seat cushion outer finisher.
JMJIA1486ZZ
JMJIA1487ZZ
JMJIA1488ZZ
: Metal clip
: Pawl
JMJIA1489ZZ
SE-96
< ON-VEHICLE REPAIR >
FRONT SEAT
• Remove the seat slide and lifter (With lifter seat), reclining
switch knob.
• Remove the clip, metal clips and pawls, and then pull out seat
cushion outer finisher outside.
• Disconnect the slide & lifter, reclining and lumbar support
switch (Driver's seat only) harness connectors.
6.
Remove the seat cushion outer finisher inside front (1) and rear
(2).
7.
Remove the metal clip and pawls, and then pull out seat cushion
inner finisher outside.
8.
Remove the seat cushion inner finisher inside front (1) and rear
(2).
9.
Remove the seatback assembly.
Remove the seatback assembly mounting bolts (A).
: Clip
: Metal clip
: Pawl
JMJIA1490ZZ
JMJIA1491ZZ
: Metal clip
: Pawl
JMJIA1492ZZ
JMJIA1493ZZ
JMJIA1495ZZ
FRONT SEAT
SE-97
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
10. Remove the metal clips, and then pull out seat cushion outer
lower finisher outside (1) and inside (2).
11. Remove the seat cushion inner lower finisher.
12. Remove the seat cushion trim and seat cushion pad. (Without occupant classification system control unit
model)
• Disconnect the seat cushion heater unit harness connector
(A).
• Remove the seat cushion trim retainer.
• Remove the hog rings, and separate the seat cushion trim and
seat cushion pad.
13. Remove the seat belt buckle.
SB-7, "SEAT BELT BUCKLE : Exploded View"
14. Remove the driver seat control unit. (Driver's power seat only)
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord
with the pad side wire.
: Metal clip
JMJIA1496ZZ
: Metal clip
JMJIA1497ZZ
JMJIA1498ZZ
SE-98
< ON-VEHICLE REPAIR >
REAR SEAT
REAR SEAT
Exploded View
INFOID:0000000003508330
REAR SEAT
JMJIA1584GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст