Infiniti EX35. Manual — part 1073
SQUEAK AND RATTLE TROUBLE DIAGNOSES
MIR-47
< SYMPTOM DIAGNOSIS >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
PIIB8742E
MIR-48
< PRECAUTION >
[WITH ADP]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000003136548
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIRBAG” and “SEAT BELT” of this
Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SRS AIRBAG”.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PREPARATION
MIR-49
< PREPARATION >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000003136549
Tool name
Description
Remover tool
Remove the clip and pawl and metal clip
PIIB7923J
MIR-50
< ON-VEHICLE REPAIR >
[WITH ADP]
INSIDE MIRROR
ON-VEHICLE REPAIR
INSIDE MIRROR
Exploded View
INFOID:0000000003691815
Base
Option
Removal and Installation
INFOID:0000000003691816
REMOVAL
Base model
1.
Inside mirror
2.
Mirror base
Refer to
for symbols in the figure.
JMLIA0145ZZ
1.
Inside mirror
2.
Mirror base
3.
Inside mirror cover
4.
Harness connector
5.
TORX bolt
Refer to
for symbols in the figure.
JMLIA0146GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст