Infiniti EX35. Manual — part 1457
TM-216
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
TRANSMISSION ASSEMBLY
38. Remove bracket (1) from A/T fluid temperature sensor 2 (2).
39. Remove O-ring (1) from A/T assembly harness connector (A).
40. Disconnect TCM connectors (A) and (B).
CAUTION:
Be careful not to damage connectors.
41. Remove A/T assembly harness connector (A) from control valve
with TCM using a flat-bladed screwdriver (B).
42. Disconnect TCM connector (A) and park/neutral position switch
connector (B).
CAUTION:
Be careful not to damage connectors.
JPDIA0014ZZ
JPDIA0015ZZ
JPDIA0016ZZ
JPDIA0017ZZ
JPDIA0018ZZ
TRANSMISSION ASSEMBLY
TM-217
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
43. Remove rear extension assembly (2WD) or adapter case assembly (AWD) according to the following pro-
cedures.
a.
2WD
i.
Remove tightening bolts for rear extension assembly and trans-
mission case.
ii.
Tap rear extension assembly with a soft hammer.
iii.
Remove rear extension assembly from transmission case. (With
needle bearing).
iv.
Remove bearing race from output shaft.
1
: Self-sealing bolt
A
: Bolt
JPDIA0026ZZ
SCIA5028E
SCIA5029E
SCIA5245E
TM-218
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
TRANSMISSION ASSEMBLY
v.
Remove output shaft from transmission case by rotating left/
right.
vi. Remove parking gear (1) from output shaft (2).
vii. Remove seal rings (1) from output shaft.
b.
AWD
SCIA5030E
JPDIA0029ZZ
JPDIA0030ZZ
TRANSMISSION ASSEMBLY
TM-219
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
i.
Remove tightening bolts (1) for adapter case assembly and
transmission case. [With bracket (2).]
ii.
Tap adapter case assembly with a soft hammer.
iii.
Remove adapter case assembly from transmission case. (With
needle bearing)
iv.
Remove gasket from transmission case.
3
: Self-sealing bolt
: Bolt
SCIA6910E
SCIA5201E
SCIA5186E
SCIA5231E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст