Infiniti EX35. Manual — part 1536
WT-100
< ON-VEHICLE REPAIR >
ROAD WHEEL TIRE ASSEMBLY
• Perform the ID registration, after tire rotation. Refer to
TRANSMITTER
WT-101
< REMOVAL AND INSTALLATION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
REMOVAL AND INSTALLATION
TRANSMITTER
Exploded View
INFOID:0000000003579773
Removal and Installation
INFOID:0000000003579774
REMOVAL
1.
Deflate tire. Unscrew transmitter retaining nut and allow transmitter to fall into tire.
2.
Gently bounce tire so that transmitter falls to bottom of tire.
Place on tire changing machine and break both tire beads
ensuring that the transmitter remains at the bottom of the tire.
3.
Turn tire so that valve hole is at bottom and bounce so that
transmitter (1) is near valve hole. Carefully lift tire onto turntable
and position valve hole (and transmitter) 270 degree from
mounting/dismounting head (2).
4.
Lubricate tire well and remove first side of the tire. Reach inside
the tire and remove the transmitter.
INSTALLATION
JPEIC0006GB
1.
Transmitter
2.
Grommet seal
3.
Valve nut
4.
Valve core
5.
Cap
Refer to
for symbols in figure.
SEIA0047E
JPEIC0014GB
WT-102
< REMOVAL AND INSTALLATION >
TRANSMITTER
1.
Put first side of tire onto rim.
2.
Mount transmitter on rim and tighten nut.
CAUTION:
Speed for tightening nut should be less than 10 rpm.
3.
Place wheel on turntable of tire machine. Ensure that transmitter
(1) is 270 degree from mounting head (2) when second side of
tire is fitted.
NOTE:
Do not touch transmitter at mounting head.
4.
Lubricate tire well and fit second side of tire as normal. Ensure
that tire does not rotate relative to rim.
5.
Inflate tire and fit to appropriate wheel position.
SEIA0049E
JPEIC0014GB
TIRE PRESSURE RECEIVER
WT-103
< REMOVAL AND INSTALLATION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
TIRE PRESSURE RECEIVER
Exploded View
INFOID:0000000003579775
Removal and Installation
INFOID:0000000003579776
REMOVAL
1.
Remove the instrument lower cover. Refer to
2.
Remove the glove box assembly.
3.
Remove the instrument lower panel RH.
4.
Disconnect tire pressure receiver (1) harness connector.
5.
Remove Tire pressure receiver mounting screw.
6.
Remove tire pressure receiver.
INSTALLATION
Install is the reverse order of removal.
JPEIC0053ZZ
1.
Tire pressure receiver
:
Vehicle front
JPEIC0056ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст