Infiniti EX35. Manual — part 978
LUGGAGE FLOOR TRIM
INT-37
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
6.
Remove the luggage side finisher lower switch escutcheon (1)
(LH/RH).
7.
Remove luggage side finisher lower fixing clips and hooks with remover tool.
8.
Pull the luggage side finisher lower (1) to disengage the clips
and metal clips, then disconnect the luggage room power socket
harness connector.(Europe Models ONLY)
9.
Remove luggage side lower finisher.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check that clips, pawls, metal clips are securely fitted in panel holes on body when installing, and then
press them in.
JMJIA1698ZZ
JMJIA1398ZZ
INT-38
< ON-VEHICLE REPAIR >
BACK DOOR TRIM
BACK DOOR TRIM
Exploded View
INFOID:0000000003758052
Removal and Installation
INFOID:0000000003744116
REMOVAL
BACK DOOR FINISHER INNER
1.
Fully open back door.
2.
Remove the clips (A) from the back door finisher inner (1) with
tool.
1.
Back door assembly
2.
Back door hinge cover
3.
Back door plate
4.
Back door finisher inner
5.
Back door finisher lid
6.
Pull handle finisher
: Clip
: Pawl
: Metal clip
JMJIA1562ZZ
JMJIA1707ZZ
BACK DOOR TRIM
INT-39
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
3.
Disengage the luggage room lamp fixing pawls with a tool, dis-
connect the harness connector (A) then remove the lamp (1)
(LH/RH)
4.
Disengage pull handle finisher (1) fixing pawls with remover tool
(A) and then remove pull handle finisher (1).
5.
Disengage the back door finisher lid (1) fixing pawls, then
remove the back door finisher lid (1) with remover tool (A).
6.
Remove the back door finisher inner.
1.
Insert remover tool (A) between back door finisher inner (1)
and back window glass, pull downwards to disengage clips
as shown in the figure.
JMJIA1385ZZ
: Pawl
JMJIA0621ZZ
: Pawl
JMJIA1384ZZ
: Clip
: Metal clip
JMJIA1674ZZ
INT-40
< ON-VEHICLE REPAIR >
BACK DOOR TRIM
2.
Insert remover tool (A) between back door lower finisher
inner (1) and back door panel to disengage the clips.
NOTE:
Starting from the lower downwards and works around the
edges and up to the sides.
7.
Pull out to remove back door finisher inner.
8.
Disengage back door plate (1) fixing pawls and metal clips with
remover tool (A) and then remove back door plate (1).
9.
Disengage back door hinge cover (1) fixing clips with remover
tool (A) and then remove back door hinge cover (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
When installing back door trim, check that clips are securely fitted in panel holes on body, and then
press them in.
: Clip
JMJIA0622ZZ
: Pawl
: Metal clip
JMJIA1699ZZ
: Clip
JMJIA1700ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст