Infiniti EX35. Manual — part 829
EXL-360
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
REAR COMBINATION LAMP
REAR COMBINATION LAMP
Exploded View
INFOID:0000000003757010
Removal and Installation
INFOID:0000000003757011
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the luggage side finisher lower. Refer to
2.
Remove the rear combination lamp finisher.
3.
Remove the rear combination lamp mounting bolts.
4.
Disconnect the rear combination lamp connector.
5.
Pull the rear combination lamp toward outside of the vehicle. Remove the rear combination lamp.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Seal packing cannot be reused.
1.
Seal packing
2.
Rear combination lamp
3.
Rear combination lamp finisher
Refer to
for symbols in the figure.
JPLIA0923ZZ
REAR TURN SIGNAL LAMP
EXL-361
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REAR TURN SIGNAL LAMP
Exploded View
INFOID:0000000003757013
Removal and Installation
INFOID:0000000003757014
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the rear bumper fascia. Refer to
2.
Remove the rear turn signal lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000003757015
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
REAR TURN SIGNAL LAMP BULB
1.
Turn the bulb socket (1) counterclockwise and unlock it.
2.
Remove the bulb (2) from the socket.
1.
Rear turn signal lamp
JPLIA0924ZZ
JPLIA0925ZZ
EXL-362
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
HIGH-MOUNTED STOP LAMP
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000003757016
Removal and Installation
INFOID:0000000003757017
REMOVAL
1.
Remove the back door plate. Refer to
2.
Remove the high-mounted stop lamp mounting nuts.
3.
Disconnect the high-mounted stop lamp connector. And then remove the rear washer tube.
4.
Pull the high-mounted stop lamp toward rear of the vehicle.
5.
Remove the high-mounted stop lamp.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Seal packing cannot be reused.
1.
Seal packing
2.
High-mounted stop lamp
Refer to
for symbols in the figure.
JPLIA0926ZZ
BACK-UP LAMP
EXL-363
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BACK-UP LAMP
Exploded View
INFOID:0000000003757020
Removal and Installation
INFOID:0000000003757021
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the back door finisher inner. Refer to
2.
Remove the back-up lamp mounting nuts.
3.
Disconnect the back-up lamp connector. And then remove the back-up lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000003757022
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
BACK-UP LAMP BULB
1.
Remove the back-up lamp. Refer to
2.
Turn the bulb socket (1) counterclockwise and unlock it.
3.
Remove the bulb (2) from the socket.
1.
Seal packing
2.
Back-up lamp
JPLIA0927ZZ
JPLIA0928ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст