Infiniti EX35. Manual — part 1271
FRONT SEAT
SE-91
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
b.
Rear inner slide cover
• Slide the seat to the front-most position.
• Pull up the rear edge of the rear inner slide cover to release
the pawls.
• Slide the rear inner slide cover rearward to release the pawls.
5.
Remove the mounting bolts on the rear side of the front seat.
6.
Set seatback in a standing position.
7.
Disconnect harness connector under the seat and remove harness securing clips.
CAUTION:
Before removal, turn ignition switch OFF, disconnect battery negative terminal, and then wait for
at least 3 minutes.
8.
Remove seat from the vehicle.
CAUTION:
• When removing and installing, use shop cloths to protect parts from damage.
• When removing and installing, 2 workers are required so as to prevent it from dropping.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Before installation, turn ignition switch OFF, disconnect both battery cables, and then wait for at
least 3 minutes.
• Clamp the harness in position.
NOTE:
After installing the front seat, perform additional service when removing battery negative terminal.(Automatic
drive positioner model only) Refer to
ADP-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGA-
.
Disassembly and Assembly
INFOID:0000000003508329
SEATBACK
Disassembly
1.
Remove the seatback board.
• Remove the clips and pawls, and then pull out seatback board.
• Pull down the seatback board to release the upper pawls.
2.
Remove the seatback trim retainer and seatback trim band from seat cushion frame.
3.
Disconnect the harness connectors and remove the harness clamps.
: Pawl
JMJIA1660ZZ
: Clip
: Pawl
JMJIA1485ZZ
SE-92
< ON-VEHICLE REPAIR >
FRONT SEAT
• Disconnect the reclining motor harness connector (A) and
lumbar support harness connector (Driver's seat only) (B).
• Disconnect the seatback heater harness (C).
• Remove the harness clamps, and then side air bag module
harness (D).
4.
Remove the metal clips and pawls, and then pull out seat cush-
ion front finisher.
5.
Remove the seat cushion outer finisher.
JMJIA1486ZZ
JMJIA1487ZZ
JMJIA1488ZZ
: Metal clip
: Pawl
JMJIA1489ZZ
FRONT SEAT
SE-93
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
• Remove the seat slide and lifter (With lifter seat), reclining
switch knob.
• Remove the clips, metal clips and pawls, and then pull out seat
cushion outer finisher outside.
• Disconnect the slide & lifter, reclining and lumbar support
switch (Driver's seat only) harness connectors.
6.
Remove the seat cushion outer finisher inside front (1) and rear
(2).
7.
Remove the metal clip and pawls, and then pull out seat cushion
inner finisher outside.
8.
Remove the seat cushion inner finisher inside front (1) and rear
(2).
9.
Remove the seatback trim and seatback pad.
: Clip
: Metal clip
: Pawl
JMJIA1490ZZ
JMJIA1491ZZ
: Metal clip
: Pawl
JMJIA1492ZZ
JMJIA1493ZZ
SE-94
< ON-VEHICLE REPAIR >
FRONT SEAT
• Remove the headrest holder.
CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
• Remove the air bag module.
• Remove the seatback trim and seatback pad from the seat-
back frame.
• Remove the hog rings, and separate the seatback trim and
seatback pad.
10. Remove the seatback silencer.
11. Remove the seatback frame.
Remove the seatback frame mounting bolts (A) and then
remove the seatback frame.
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seatback trim in position, and then securely connect the trim or trim cord with
the pad side wire.
SEAT CUSHION
Disassembly
CAUTION:
Never disassemble front passenger seat cushion assembly.
Always replace as an assembly.
For front passenger seat service parts, refer to the service part catalogue.
1.
Remove the seatback board.
• Remove the clips and pawls, and then pull out seatback board.
• Pull down the seatback board to release the upper pawls.
2.
Remove the seatback trim retainer and seatback trim band from seat cushion frame.
3.
Disconnect the harness connectors and remove the harness clamps.
PIIB8351J
JMJIA1494ZZ
: Clip
: Pawl
JMJIA1485ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст