Infiniti EX35. Manual — part 1063
INSIDE MIRROR SYSTEM
MIR-7
< FUNCTION DIAGNOSIS >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
INSIDE MIRROR SYSTEM
System Description
INFOID:0000000003136525
The sensor built in inside mirror detects the brightness of headlight of the vehicle behind and automatically
changes the light transmission to decrease the brightness.
Component Description
INFOID:0000000003136526
Component
Function
Auto anti-dazzling inside mirror
It automatically changes the light transmittance according to the brightness of the
light from the headlight of the vehicle behind.
MIR-8
< FUNCTION DIAGNOSIS >
[WITH ADP]
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
Diagnosis Description
INFOID:0000000003698500
The auto drive positioner system can be checked and diagnosed for component operation with CONSULT-III.
DIAGNOSTIC MODE
CONSULT-III Function
INFOID:0000000003698501
SELF-DIAGNOSIS RESULTS
DATA MONITOR
Diagnostic mode
[AUTO DRIVE POS.]
Description
WORK SUPPORT
Changes the setting of each function.
SELF-DIAG RESULTS
Performs self-diagnosis for the auto drive positioner system and displays the results.
DATA MONITOR
Displays input signals transmitted from various switches and sensors to driver seat con-
trol unit in real time.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
ACTIVE TEST
Drive each output device.
ECU PART NUMBER
Displays part numbers of driver seat control unit parts.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
SET SW
“ON/OFF”
×
×
ON/OFF status judged from the setting switch signal.
MEMORY SW 1
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 1 sig-
nal.
MEMORY SW 2
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 2 sig-
nal.
SLIDE SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (forward) sig-
nal.
SLIDE SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (backward)
signal.
RECLN SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (forward)
signal.
RECLN SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (backward)
signal.
LIFT FR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (up) sig-
nal.
LIFT FR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (down)
signal.
LIFT RR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (up) sig-
nal.
LIFT RR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (down)
signal.
MIR CON SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (up) signal.
MIR CON SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (down) signal.
MIR CON SW–RH
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (passenger side) signal.
MIR CON SW–LH
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (driver side) signal.
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
MIR-9
< FUNCTION DIAGNOSIS >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
ACTIVE TEST
CAUTION:
When driving vehicle, do not perform active test.
MIR CHNG SW–R
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to right) signal.
MIR CHNG SW–L
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to left) signal.
TILT SW-UP
“ON/OFF”
×
×
ON/OFF status judged from the tilt switch (up) signal.
TILT SW-DOWN
“ON/OFF”
×
×
ON/OFF status judged from the tilt switch (down) signal.
TELESCO SW-FR
“ON/OFF”
×
×
ON/OFF status judged from the telescoping switch (for-
ward) signal.
TELESCO SW-RR
“ON/OFF”
×
×
ON/OFF status judged from the telescoping switch (back-
ward) signal.
DETENT SW
“ON/OFF”
×
×
The selector lever position “OFF (P position) / ON (other
than P position)” judged from the detention switch signal.
STARTER SW
“ON/OFF”
×
×
Ignition key switch ON (START, ON) /OFF (ACC, OFF) sta-
tus judged from the ignition switch signal.
SLIDE PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
RECLN PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
LIFT FR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
LIFT RR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
MIR/SEN RH U–D
“V”
–
×
Voltage input from door mirror sensor (passenger side) up/
down is displayed.
MIR/SEN RH R–L
“V”
–
×
Voltage input from door mirror sensor (passenger side) left/
right is displayed.
MIR/SEN LH U–D
“V”
–
×
Voltage input from door mirror sensor (driver side) up/down
is displayed.
MIR/SEN LH R–L
“V”
–
×
Voltage input from door mirror sensor (driver side) left/right
is displayed.
TILT SEN
“V”
–
×
Voltage input from tilt sensor is displayed.
TELESCO SEN
“V”
–
×
Voltage input from telescopic sensor is displayed.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
Test item
Description
SEAT SLIDE
Activates/deactivates the sliding motor.
SEAT RECLINING
Activates/deactivates the reclining motor.
SEAT LIFTER FR
Activates/deactivates the lifting motor (front).
SEAT LIFTER RR
Activates/deactivates the lifting motor (rear).
TILT MOTOR
Activates/deactivates the tilt motor.
TELESCO MOTOR
Activates/deactivates the telescopic motor.
MIRROR MOTOR RH
Activates/deactivates the mirror motor (passenger side).
MIR-10
< FUNCTION DIAGNOSIS >
[WITH ADP]
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
WORK SUPPORT
MIRROR MOTOR LH
Activates/deactivates the mirror motor (driver side).
MEMORY SW INDCTR
Turns ON/OFF the memory indicator.
Test item
Description
Work item
Content
Item
SEAT SLIDE VOLUME SET
The amount of seat sliding for entry/exit assist can be selected
from 3 items.
40 mm
80 mm
150 mm
EXIT TILT SETTING
Entry/exit assist (steering column) can be selected:
ON (operated) – OFF (not operated)
ON
OFF
EXIT SEAT SLIDE SETTING
Entry/exit assist (seat) can be selected:
ON (operated) – OFF (not operated)
ON
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст