Infiniti G35 (V35) Sedan. Manual — part 185
AV-512
< ECU DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
CD CHANGER
JCNWA0064GB
AV
CD CHANGER
AV-513
< ECU DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
JCNWA0065GB
AV-514
< SYMPTOM DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
MULTI AV SYSTEM SYMPTOMS
SYMPTOM DIAGNOSIS
MULTI AV SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000000964901
Related to navigation
Related to HANDS FREE PHONE
• Check that the cellular phone is corresponding type (Bluetooth® correspond) when the hands free related
malfunction vehicle is in service before performing a diagnosis,.
• There is a case that malfunction occurs due to the version change of the phone type, etc. even though it is a
corresponding type. Therefore, confirm it by changing the cellular phone to another corresponding type
phone, and check that it operates normally. It is necessary to distinguish whether the cause is the vehicle or
cellular phone.
Trouble diagnosis chart by symptom
Symptoms
Check items
Possible malfunction location / Action to take
Multifunction switch and preset
switch operation does not work.
• All switches cannot be operated
• “Multi AV” is displayed on system se-
lection display when the CONSULT-
III is initialized.
Perform CONSULT-III self-diagnosis. Refer to
.
• All switches cannot be operated
• “Multi AV” is not displayed on system
selection screen when the CON-
SULT-III is initialized.
Multifunction switch power supply and ground circuit
Refer to
AV-380, "MULTIFUNCTION SWITCH : Diagno-
Only specified switch cannot be oper-
ated
• Perform CONSULT-III self-diagnosis. Refer to
.
• No malfunction
- multifunction switch (
- preset switch (
• When malfunction is detected (
Fuel economy display, vehicle
setting operation is abnormal
There is malfunction in the CONSULT-
III self-diagnosis result
Perform detected DTC self-diagnosis.
(
AV-347, "CONSULT - III Function"
)
There is no malfunction in the self-di-
agnosis results
Ignition signal (
AV-379, "AV CONTROL UNIT : Diagno-
Guide sound is not heard.
On the setting display select “system
sound (guide sound volume, etc.),” and
confirm that guide sound is ON.
Voice guidance signal circuit
Satellite radio is not received.
There is malfunction in the CONSULT-
III self-diagnosis result
Perform detected DTC self-diagnosis.
(
AV-347, "CONSULT - III Function"
)
There is no malfunction in the CON-
SULT-III self-diagnosis result
Perform the following procedures.
1.
Check satellite radio antenna mounting nut for
looseness.
NOTE:
Tightening torque: 6.5 N·m (0.66 kg-m, 58 in-lb)
2.
Visually check for satellite radio antenna feeder.
3.
Replace satellite radio antenna.
(
4.
Replace the AV control unit.
(
)
AV
MULTI AV SYSTEM SYMPTOMS
AV-515
< SYMPTOM DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
Related to CAMERA
Trouble diagnosis chart by symptom
Symptoms
Check items
Probable malfunction location
Does not recognize cellular
phone connection. (no con-
nection is displayed on the dis-
play at the guide.)
Repeat the registration of cellular phone.
AV control unit (
)
Hands free phone cannot be
established.
• Hands free phone operation can be
made, but the communication cannot
be established.
• Hands free phone operation can be
performed, however, voice between
each other cannot be heard during the
conversation.
AV control unit (
)
The other party's voice cannot
be heard by hands free phone.
Check the “microphone speaker ”in In-
spection & Adjustment Mode if sound is
heard.
AV control unit (
)
Check the “microphone speaker ”in In-
spection & Adjustment Mode if sound is
not heard.
TEL voice signal circuit
Originating sound is not heard
by the other party with hands
free phone communication.
Sound operation function is normal.
AV control unit (
)
Sound operation function does not work.
Microphone signal circuit
(
)
Symptoms
Check items
Probable malfunction location
Camera image is not dis-
played (displayed in black and
nothing can be displayed)
AUX image is not displayed.
Horizontal synchronizing (HP) signal circuit
(
)
Camera image is not shown.
(Vehicle width and possible
route line is displayed.)
—
• camera image signal circuit (rear view camera to
camera control unit)
(
)
• Rear view camera ON signal
)
Camera image is not dis-
played. (Only warning mes-
sage under area is displayed)
There is malfunction in the CONSULT-III
self-diagnosis result
Perform detected DTC self-diagnosis.
(
AV-347, "CONSULT - III Function"
)
AUX image is normal.
Camera image signal circuit (camera control unit to dis-
play unit) (
)
AUX image is not displayed.
RGB area (YS) signal circuit
(
)
Select “Camera Cont.” of confirmation/
Adjustment mode, Reverse Sensor is not
turned ON at “Connection Confirmation”.
Reverse signal (camera control unit)
Select “Camera Cont..”of confirmation/
Adjustment mode, all signals are “OFF”
all the time at “Connection Confirmation”
(except for Side View)
Ignition signal
(
AV-379, "AV CONTROL UNIT : Diagnosis Procedure"
CAMERA image is rolling.
AUX image is also rolling.
Vertical synchronizing (VP) signal circuit
(
)
Camera image does not
switch.
Malfunction of self-diagnosis result is in-
dicated.
Camera-connection recognition signal circuit
(
)
Malfunction of self-diagnosis result is not
indicated.
Reverse signal (AV control unit)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст